Engine Service:
Detailed diagnosis, disassembly, assembly, and repair of engine components.
Fuel System Service:
Carburetor service, fuel injection (if applicable), fuel pump, lines, and tank.
Ignition System Service:
Distributor, spark plugs, ignition coils, and wiring diagnostics.
Cooling System Service:
Radiator, thermostat, water pump, fan, and coolant specifications.
Exhaust System Service:
Muffler, catalytic converter (if equipped), pipes, and hangers.
Transmission Service:
Manual and automatic transmission diagnosis, repair, fluid changes, and clutch service.
Drivetrain Service:
Axles, CV joints, driveshafts, and differential service.
Suspension Service:
Struts, shocks, control arms, springs, and alignment specifications.
Steering System Service:
Steering rack, power steering pump (if equipped), and steering column.
Brake System Service:
Brake pads, rotors, calipers, drums, master cylinder, and hydraulic lines.
Electrical System Service:
Battery, alternator, starter, lighting, wiring diagrams, fuses, and relays.
Body And Interior Service:
Panel replacement, door mechanisms, seats, and trim.
HVAC System Service:
Heater core, A/C components (if equipped), blower motor, and controls.
Preventative Maintenance:
Scheduled maintenance, oil changes, filter replacements, fluid checks, and lubrication.
Diagnostic Procedures:
Troubleshooting guides, symptom-based diagnostics, and common fault identification.
Repair Procedures:
Step-by-step instructions for component removal, repair, and reinstallation.
Disassembly Assembly:
Detailed procedures for taking apart and putting back together various vehicle systems.
Cleaning And Reinstalling:
Specific instructions for cleaning parts before reassembly and correct installation methods.
Diagnostics Complexity:
Covers both fundamental troubleshooting and advanced diagnostic techniques suitable for DIY and professional use.
Repair Scope:
Encompasses minor adjustments to major component overhauls and rebuilds.
Wiring Information:
Includes electrical schematics and wiring diagrams for comprehensive electrical system repair.
Oil Change Interval:
Typically every 3,000 miles or 3 months; consult manual for specific engine recommendations.
Tune Up Interval:
Recommended every 15,000-30,000 miles for spark plugs, filters, and ignition timing adjustments.
Engine Oil:
Refer to manual for specific viscosity grade (e.g., 5W-30, 10W-40); API service classification SE or SF.
Coolant:
Ethylene glycol based antifreeze, typically a 50/50 mix with distilled water.
Transmission Fluid Manual:
GL-4 Gear Oil (e.g., 75W-90 or 80W-90)
Transmission Fluid Automatic:
Mercon or Type-A Automatic Transmission Fluid
Brake Fluid:
DOT 3 Brake Fluid
Common Wear Items:
CV joints, exhaust components, brake wear, ignition system components (points, condenser), carburetor adjustments, aging rubber hoses and belts.
Rust Prone Areas:
Wheel wells, rocker panels, door bottoms, and chassis components, depending on climate and care.
