Historical Context:
The Fiat Coupé (Type 175) was a sporty compact car produced by Italian manufacturer Fiat from 1993 to 2000. It was known for its distinctive and polarizing styling, designed by Pininfarina, and its performance-oriented variants.
Key Competitors:
Competed against cars like the Alfa Romeo GTV, Ford Probe, Mitsubishi Eclipse, and Toyota Celica GT-Four in its segment.
Design Philosophy:
Emphasized sharp, angular styling with a focus on driving dynamics and a sporty cockpit-like interior. Offered both naturally aspirated and turbocharged engine options.
General Coverage:
Comprehensive service, repair, and maintenance
Specific Systems Covered:
Engine, Transmission, Drivetrain, Suspension, Steering, Brakes, Fuel System, Electrical System, Body, HVAC, Diagnostics
Type:
Factory Service Repair Manual
Engine Mechanical:
Complete overhaul, component testing, timing belt replacement, piston/ring inspection, cylinder head service, lubrication system
Engine Performance:
Fuel injection system diagnosis, ignition system troubleshooting, emission control systems, turbocharger operation (where applicable)
Transmission Manual:
Clutch service, gearbox overhaul, gear selection mechanism, shift linkage adjustment
Transmission Automatic:
Automatic transmission diagnosis, fluid service, component identification, torque converter
Drivetrain:
Front-wheel drive axle service, CV joint inspection, differential maintenance
Suspension:
Front and rear suspension component replacement, shock absorber/strut service, spring replacement, wheel alignment specifications
Steering:
Power steering system diagnosis, rack and pinion service, steering column components, tie rod end replacement
Brakes:
Disc brake service (front and rear), caliper overhaul, brake pad replacement, rotor resurfacing/replacement, ABS system diagnosis (if equipped), brake fluid specifications
Electrical System:
Wiring diagrams, starter, alternator, battery service, lighting systems, fuses and relays, instrument cluster diagnosis, body control modules
Fuel System:
Fuel pump testing, injector diagnosis, fuel filter replacement, fuel tank service
HVAC:
Air conditioning system service, refrigerant recharge, heater core replacement, blower motor diagnosis
Body And Trim:
Exterior panel removal/installation, interior trim components, door mechanisms, glass replacement, sealant and weatherstripping
Routine Maintenance:
Oil changes, filter replacements, spark plug replacement, fluid checks and top-offs, belt inspection and replacement
Troubleshooting:
Systematic diagnostic procedures for common and uncommon faults, diagnostic trouble codes (DTCs)
Major Repairs:
Engine rebuilds, transmission overhauls, suspension component replacement, brake system overhauls
Component Replacement:
Detailed step-by-step instructions for replacing virtually all major and minor components
Technical Specifications:
Torque values, clearances, fluid capacities, wiring diagrams, diagnostic data
Depth Of Information:
Factory-level diagnostic and repair procedures, suitable for professional technicians and advanced DIY enthusiasts
Engine 1 6 16V:
1.6L 1598cc inline-4, 16 valves. Power: ~103 hp (77 kW), Torque: ~145 Nm (107 lb-ft).
Engine 2 0 16V Turbo:
2.0L 1995cc inline-5, 16 valves, Turbocharged. Power: ~190 hp (142 kW), Torque: ~280 Nm (207 lb-ft).
Engine 2 0 20V:
2.0L 1998cc inline-5, 20 valves. Power: ~147 hp (110 kW), Torque: ~180 Nm (133 lb-ft).
Engine 2 0 20V Turbo:
2.0L 1998cc inline-5, 20 valves, Turbocharged. Power: ~220 hp (164 kW), Torque: ~310 Nm (229 lb-ft).
Engine Management:
Electronic Fuel Injection (EFI) / Multi-Point Fuel Injection (MPI)
Turbocharger Details:
Garrett T25 or similar (for turbo variants)
Fuel Type:
Unleaded Gasoline (95 RON recommended)
Fuel Delivery:
Bosch Motronic or similar multi-point injection systems
Length:
Approx. 4,250 mm (167.3 in)
Width:
Approx. 1,760 mm (69.3 in)
Height:
Approx. 1,350 mm (53.1 in)
Wheelbase:
Approx. 2,520 mm (99.2 in)
Wheel Bolt Pattern:
4x98mm
Wheel Size:
15-inch (standard), 16-inch & 17-inch (optional)
Seating Capacity:
4 (2+2 configuration)
Trunk Volume:
Approx. 350 liters (12.4 cu ft)
Curb Weight:
Approx. 1250-1450 kg (2756-3197 lbs), depending on engine and equipment
Oil Change Interval:
Every 15,000 km (9,300 miles) or 1 year, whichever comes first (using synthetic oil).
Timing Belt Replacement:
Every 70,000 km (43,500 miles) or 5 years, whichever comes first. Critical on 5-cylinder engines due to interference design.
Engine Oil:
API SG/SH or ACEA A2/A3, SAE 10W-40 or 5W-40 (depending on climate and manufacturer recommendation). Capacity: approx. 4.5-5.5 liters.
Coolant:
Ethylene Glycol based antifreeze, 50% concentration with distilled water. Capacity: approx. 6.5-7.5 liters.
Transmission Fluid Manual:
GL-4 SAE 75W-90 or 80W-90 gear oil. Capacity: approx. 2.2-2.5 liters.
Transmission Fluid Automatic:
Dexron III or equivalent. Capacity: approx. 3.5-4.0 liters (for fluid change).
Rust And Corrosion:
Prone to rust, especially around wheel arches, sills, and rear subframe mounting points. Requires diligent inspection and preventative treatment.
Electrical Gremlins:
Older wiring harnesses and connectors can degrade, leading to intermittent faults in lighting, sensors, and ECUs. The manual provides wiring diagrams crucial for diagnosis.
Suspension Wear:
Ball joints, wishbone bushes, and shock absorbers can wear out, affecting handling and ride quality. The manual details replacement procedures and torque specs.
Turbocharger Issues:
Turbocharged models can suffer from turbo failures due to oil starvation or lack of servicing. Regular oil changes are critical. Manual covers turbo diagnostics and replacement.
Clutch Wear:
Clutch wear is normal; replacement procedures are detailed in the manual. Dual-mass flywheels can also be a failure point.
Fiat Performance Cars:
Fiat has a long history of producing sporty and iconic cars, including models like the Fiat 124 Sport Coupé, X1/9, and Punto Abarth.
Design Influences:
Styling was a radical departure from contemporary Fiat designs, heavily influenced by the angular, origami-like aesthetic popular in the early 90s. Pininfarina was responsible for the exterior design.
Engine Progression:
Initially launched with 1.6L and 2.0L 16V engines. Later gained the more powerful 2.0L 20V 5-cylinder engine and significantly powerful 2.0L 20V Turbo variant, which became the flagship performance model.
Manufacturing Location:
Turin, Italy
Production Volume:
Approximately 80,000 units produced worldwide.