🏷️ Basic Information

Make:

BMW

Model:

K1100RS

Year:

1995

Type:

Motorcycle

K Series Generation:

Second Generation K-Series

Vin Designation:

2nd digit 'K'

👋 Introduction

Vehicle Segment:

Sport Touring Motorcycle

Bmw Heritage:

Represents BMW's continuation of the K-Series 'Flying Brick' design, emphasizing touring comfort and performance

Competitors:

Competed against other large-displacement sport-touring motorcycles from Japanese and European manufacturers

Engine Configuration:

Inline four-cylinder, transverse-mounted, 16-valve DOHC engine

Drivetrain:

Shaft drive for low maintenance and smooth power delivery

Aerodynamics:

Full fairing with adjustable windscreen for rider comfort and wind protection

Braking Technology:

Integral ABS (Anti-lock Braking System) for enhanced safety

Handling:

Balanced chassis with adjustable suspension for stable and confidence-inspiring handling

📋 Manual Details

Primary Coverage:

Complete Service and Repair for BMW K1100RS 1995 Model Year

Diagnostic Coverage:

Includes troubleshooting guides and diagnostic procedures

Maintenance Coverage:

Routine maintenance, scheduled service, and component replacement

Electrical Coverage:

Comprehensive wiring diagrams and electrical system diagnostics

Engine Coverage:

Engine teardown, assembly, tuning, and specifications

Transmission Coverage:

Gearbox service, clutch, and final drive maintenance

Chassis Coverage:

Suspension, steering, braking system, and frame component service

Bodywork Coverage:

Fairing removal, installation, and accessory fitting

Estimated Pages:

Approx. 400-600 pages (typical for this era's full factory manuals)

Manual Classification:

Factory Service Manual / Repair Manual

Intended User:

BMW Dealership Technicians and Qualified Mechanics

Primary Language:

English

Delivery Method:

Downloadable PDF

📖 Manual Coverage

Engine Management:

Motronic electronic engine management system (fuel injection and ignition)

Fuel System:

Bosch LE-Jetronic fuel injection, fuel pump, injectors, pressure regulator

Ignition System:

Electronic ignition timing and components

Cooling System:

Liquid-cooled engine, radiator, fan, thermostat, coolant flow

Exhaust System:

Catalytic converter, mufflers, lambda sensor (where applicable)

Clutch System:

Hydraulic actuation, clutch plate and pressure plate service

Transmission Gearbox:

5-speed sequential gearbox, gear selection, lubrication

Final Drive:

Shaft drive, universal joint, bevel gear unit maintenance

Front Suspension:

Telescopic forks, damping adjustment, fork seal replacement

Rear Suspension:

Monolever or Paralever (specific to K1100RS generation), shock absorber, preload adjustment

Braking System:

Integral ABS (Anti-lock Braking System), hydraulic lines, calipers, rotors, fluid replacement

Wheel Hubs:

Wheel bearing service, hub maintenance

Steering System:

Headstock bearings, steering geometry

Electrical System Charging:

Alternator, voltage regulator, battery service

Lighting System:

Headlight, taillight, turn signals, dashboard illumination

Instrumentation:

Speedometer, tachometer, warning lights, fuel gauge

Fairings And Bodywork:

Aerodynamic fairing, seat, fuel tank, side covers

Engine Overhaul:

Complete engine disassembly, inspection, measurement, and reassembly with torque specifications

Fuel Injection Tuning:

Diagnostic routines, sensor testing, idle speed adjustment

Brake Bleeding:

ABS and standard brake system bleeding procedures

Suspension Adjustment:

Fork preload and damping, rear shock preload and rebound adjustments

Electrical Troubleshooting:

Fault finding using wiring diagrams, resistance checks, voltage tests

Valve Clearance Adjustment:

Procedure for checking and adjusting valve clearances

Clutch Replacement:

Step-by-step guide for clutch disc and pressure plate replacement

Wheel Bearing Replacement:

Front and rear wheel bearing service procedures

ABS System Service:

Specific procedures for ABS module, wheel speed sensors, and hydraulic unit

Troubleshooting Flowcharts:

Systematic fault diagnosis using logic trees

Torque Specifications:

All critical fastener torque values provided

Diagnostic Codes:

Error code interpretation and resolution for Motronic system

Depth Level:

Comprehensive Factory Level Detail

Diagnostic Capabilities:

Advanced diagnostics, including component testing and system analysis

Rebuild Procedures:

Detailed instructions for complete engine and transmission rebuilds

Special Tools:

Identification and usage of BMW-specific tools required for certain procedures

📊 Manual Specifications

Format Type:

PDF (Portable Document Format)

Text Searchability:

Searchable text for quick information retrieval

Printability:

Printable in its entirety or specific sections for workshop use

Digital Binding:

N/A (Digital PDF Format)

Digital Paper Emulation:

N/A (Digital PDF Format)

⚙️ Engine Specifications

Engine Type:

Inline four-cylinder, four-stroke

Displacement:

1093 cc (1093 cubic centimeters)

Bore X Stroke:

72 mm x 67.5 mm

Valvetrain:

DOHC (Double Overhead Camshaft), 16 valves (4 per cylinder)

Compression Ratio:

10.1:1

Cooling System:

Liquid-cooled

Engine Mounting:

Transverse, forward-inclined

Horsepower:

100 hp (74 kW) @ 7500 rpm (approx.)

Torque:

109 Nm (80 lb-ft) @ 6000 rpm (approx.)

Fuel Delivery:

Bosch Motronic Electronic Fuel Injection (LE-Jetronic)

Fuel Type:

Unleaded gasoline, minimum 91 octane (RON+MON)/2

Fuel Tank Capacity:

21 Liters (5.5 US gallons)

Oil Capacity W Filter:

Approx. 4.5 Liters (4.8 US quarts) - refer to manual for exact capacity

Recommended Oil Grade:

SAE 20W-40 or SAE 20W-50 (refer to manual for specific climate recommendations)

Oil Filter Part Number:

BMW Part No. 11 42 1 452 481 (or equivalent aftermarket)

🔧 Transmission

Gearbox Type:

5-speed, constant mesh, sequential gearbox

ABS Variant:

Available with or without Integral ABS

Clutch Type:

Hydraulically operated, multi-plate wet clutch

Final Drive Type:

Shaft drive with universal joint

Final Drive Gear Ratio:

3.33:1 (11/33 teeth) (check manual for specific variant)

Recommended Gear Oil:

SAE 75W-90 GL-5 (refer to manual for specific capacity and type)

📐 Dimensions

Length:

Approx. 2260 mm (89.0 in)

Width:

Approx. 880 mm (34.6 in) at handlebars

Height:

Approx. 1375 mm (54.1 in) at windscreen

Wheelbase:

Approx. 1517 mm (59.7 in)

Dry Weight:

Approx. 239 kg (527 lbs)

Wet Weight:

Approx. 260 kg (573 lbs) (fully fueled and with ABS)

🛡️ Safety Features

ABS Rating:

BMW Integral ABS (Anti-lock Braking System) as a key safety feature

Braking System:

Dual 305mm front discs with 4-piston calipers, single 280mm rear disc with 2-piston caliper

Lighting:

Halogen headlight, integrated front and rear turn signals, brake light

Chassis Design:

Sturdy frame construction for stability

Fairing Protection:

Full fairing provides aerodynamic stability and rider protection from elements

💡 Technology Features

Instrument Cluster:

Comprehensive analog gauges (speedometer, tachometer) and warning lights for engine, ABS, oil, etc.

ABS System:

Integral ABS (Anti-lock Braking System) enhances braking safety during deceleration

Diagnostic Interface:

Pre-OBD-II era diagnostics, often requiring specific BMW diagnostic tools or knowledge for full system checks.

🔧 Maintenance

Oil Change Interval:

Every 10,000 km or 12 months (whichever comes first) - refer to manual for exact recommendations

Valve Check Interval:

Every 20,000 km (refer to manual for specific interval)

Brake Fluid Change:

Every 2 years, regardless of mileage

Spark Plug Replacement:

Every 20,000 km or as per manual recommendations

Coolant Type:

BMW approved antifreeze/coolant mixture (e.g., ethylene glycol based) - consult manual for specific BMW product code

Brake Fluid Type:

DOT 4 hydraulic fluid (for both ABS and non-ABS systems)

Fuel Pump Reliability:

Some early models may experience fuel pump issues; refer to manual for troubleshooting

Rear Shock ABSorber:

Original rear shock absorbers may require rebuilding or replacement due to age and mileage

ABS System Maintenance:

ABS system requires periodic bleeding and sensor checks for optimal performance

Tire Pressure:

Regularly check tire pressures as per specifications in the manual

Battery Condition:

Inspect battery terminals for corrosion and maintain charge

📚 Vehicle History

Bmw Motorcycles:

BMW Motorrad has a long history of producing high-quality, innovative motorcycles, particularly known for their boxer-twin engines and later, the K-Series inline-fours.

K Series Lineage:

The K1100RS is part of the second generation of BMW's K-Series, evolving from the K100 and K1. It refined the transverse inline-four concept with improved aerodynamics and features like ABS.

Rs Designation:

The 'RS' designation in BMW nomenclature typically signifies 'Rennsport' (racing sport), implying a sportier touring variant with enhanced fairing and performance over the standard RT (Reise-Touren) or base models.

Production Years:

1992-1996 (for K1100RS)

Manufacturing Location:

Berlin, Germany

🏆 Awards & Recognition

Motorcycle Journalism:

The K1100RS was generally well-received by motorcycle journalists for its comfort, performance, and engineering, often praised for its touring capabilities and stability.

Reliability Perception:

BMW motorcycles of this era are generally perceived as reliable, especially with proper maintenance, though complex systems like ABS require dedicated servicing.

Emission Standards:

Designed to meet emission standards of its production era; manual will contain relevant specifications.