Votre panier
😊 Product added to cart successfully   Product removed to cart successfully
Votre panier est vide !
Continuer les achats
1 de 5

BMW R1150R 2001 Maintenance INTEGRAL ABS

Prix habituel
$17.99
Prix soldé
$17.99
Prix habituel
🏷️ Basic Information Identification Make: BMW Model: R1150R Year: 2001 Sub Model Identifier: Integral ABS Codes Chassis Code: R21 👋 Introduction Market Position Segment: Sport Touring / Naked Sportbike Target...
26 people are viewing this right now
Taper: Motorcycle
Distributeur:
UGS: 602575
BMW R1150R 2001 Maintenance INTEGRAL ABSBMW R1150R 2001 Maintenance INTEGRAL ABSBMW R1150R 2001 Maintenance INTEGRAL ABSBMW R1150R 2001 Maintenance INTEGRAL ABS
🏷️ Basic Information
Identification
Make:
BMW
Model:
R1150R
Year:
2001
Sub Model Identifier:
Integral ABS
Codes
Chassis Code:
R21
👋 Introduction
Market Position
Segment:
Sport Touring / Naked Sportbike
Target Audience:
BMW riders seeking detailed maintenance and repair guidance
Competitive Analysis
Key Competitors:
Other large displacement naked bikes and sport tourers of the era
Key Features
Unique Selling Points:
Boxer twin engine, shaft drive, Integral ABS, robust build quality
📋 Manual Details
Coverage Areas
Primary Coverage:
Maintenance and Repair
Secondary Coverage:
Troubleshooting, Specifications, Technical Data
Page Count
Estimated Pages:
Approximately 300-400
Manual Type
Type:
Service Manual / Repair Manual
Language
Language:
English
Format
Format:
Digital (PDF)
📖 Manual Coverage
Systems Covered
Engine:
Full disassembly, assembly, diagnostics, tuning
Fuel System:
Fuel injection system (EFI), throttle bodies, injectors, fuel pump, pressure regulator
Ignition System:
Ignition coils, spark plugs, ECU control
Transmission:
Clutch, gearbox, final drive (shaft drive)
Integral ABS:
ABS II system, hydraulic unit, sensors, troubleshooting, bleeding procedures
Brakes:
Brake lines, calipers, master cylinders, pads, discs
Suspension:
Front fork (telescopic), rear shock absorber, linkages
Electrical System:
Wiring diagrams, battery, alternator, starter motor, lighting, instrumentation
Bodywork And Frame:
Fairings, seat, fuel tank, frame, fasteners
Procedures Included
Routine Maintenance:
Oil changes, filter replacements, spark plug replacement, air filter cleaning/replacement
Major Maintenance:
Valve clearance adjustment, clutch inspection, final drive oil change
Troubleshooting:
Diagnostic codes, common problems and solutions, electrical fault finding
Repair Procedures:
Step-by-step guides for component replacement and overhaul
Torque Specifications:
Precise torque values for all critical fasteners
Diagnostic Procedures:
Specific tests for engine, electrical, and ABS systems
Technical Depth
Depth:
Comprehensive: from basic rider checks to full engine rebuilds and complex system diagnostics
📊 Manual Specifications
File Format
PDF Quality:
High-resolution, searchable text
Print Quality
Print Readability:
Optimized for clear printing of diagrams and text
Binding Type
Digital Format Benefit:
Instant download, bookmarking, keyword search functionality
Paper Type
Print Recommendation:
Print on durable paper for workshop use
⚙️ Engine Specifications
Primary Engine
Type:
Air/oil-cooled, four-stroke, horizontally opposed twin-cylinder (Boxer)
Displacement:
1130 cc (1130cc)
Bore X Stroke:
101 mm x 70.5 mm
Compression Ratio:
9.0:1
Valve Train:
2 valves per cylinder, pushrod operated
Cooling System:
Combined air and oil cooling
Performance
Horsepower:
95 hp @ 7250 rpm
Torque:
98 Nm (72 lb-ft) @ 5250 rpm
Fuel System
Fuel Delivery:
Electronic Fuel Injection (EFI) - Bosch Motronic MA 2.4
Fuel Type:
Unleaded gasoline (95 RON recommended)
Fuel Tank Capacity:
20.4 liters (5.4 US gal)
🔧 Transmission
Standard
Type:
6-speed manual gearbox
Features
Drive Type:
Shaft drive
Clutch:
Single dry plate, hydraulically actuated
📐 Dimensions
Exterior
Length:
2150 mm (84.6 in)
Width:
850 mm (33.5 in) (over handlebars)
Height:
1280 mm (50.4 in) (to windscreen)
Wheelbase:
1470 mm (57.9 in)
Seat Height:
830 mm (32.7 in) (adjustable)
Weights
Dry Weight:
215 kg (474 lbs)
Wet Weight:
237 kg (522.5 lbs)
Gross Vehicle Weight Rating:
430 kg (948 lbs)
🛡️ Safety Features
Ratings
Crash Test Data:
Not applicable to motorcycles in the same way as cars; focus on system functionality
Active Features
Integral ABS:
BMW Integral ABS II (optional on some markets, standard on this variant) - controls front and rear brakes
Braking System Front:
Dual 320 mm discs with 4-piston calipers
Braking System Rear:
Single 276 mm disc with 2-piston caliper
Passive Features
Lighting:
Halogen headlight, LED taillight, integrated turn signals
💡 Technology Features
Infotainment
Standard Features:
Analog speedometer and tachometer, LCD multi-function display (odometer, trip meters, clock, ambient temp)
Driver Assistance
ABS:
Integral ABS II (covers both braking circuits, hand lever activates front and rear, foot lever activates rear only)
Connectivity
Diagnostic Interface:
BMW specific diagnostic port for use with diagnostic tools
🔧 Maintenance
Service Intervals
Oil Change Interval:
Every 10,000 km or annually (whichever comes first)
Valve Clearance Check:
Every 20,000 km
Spark Plug Replacement:
Every 20,000 km
Final Drive Oil Change:
Every 20,000 km
Fluid Specifications
Engine Oil:
SAE 20W-50, API SG/SH or JASO MA compliant synthetic or mineral oil (capacity approx. 3.0 liters with filter)
Transmission Oil:
SAE 75W-90 API GL-5 gear oil (capacity approx. 0.75 liters)
Final Drive Oil:
SAE 80W-90 API GL-5 gear oil (capacity approx. 0.18 liters)
Brake Fluid:
DOT 4
Coolant:
Not applicable (air/oil cooled)
Known Issues
Common Wear Items:
Clutch slave cylinder seal leaks, fuel pump relay failures, occasional alternator issues
ABS Related Concerns:
ABS sensor contamination, hydraulic unit issues if not properly maintained (e.g., bleeding)
Performance Tuning:
Throttle body synchronization, fuel mapping adjustments
📚 Vehicle History
Brand Heritage
Founding Year:
1916
Motorcycle Division Founding:
1923
Model Evolution
Predecessor:
R1100R
Introduction Year:
1999
Update Year For 2001:
2001 saw minor updates and potentially wider availability of ABS II
Production
Manufacturing Location:
Berlin, Germany
🏆 Awards & Recognition
Recognitions
Industry Reviews:
Generally well-received for its blend of comfort, performance, and touring capability
Ratings
Reliability Perception:
Considered a reliable platform with proper maintenance
Certifications
Emissions Standards:
Meets relevant emissions standards for its model year and market
Sale

Unavailable

Sold Out