Target Audience:
DIY enthusiasts, ATV owners looking to perform their own maintenance and repairs.
Value Proposition:
Save significant money on repair costs by empowering owners with professional-grade repair information.
Vs Dealer Service:
Provides dealership-level technical information at a fraction of the cost of labor.
Accessibility:
Instant download, compatible with PC, MAC, Tablets, and Smartphones.
User Friendliness:
Easy layout, step-by-step instructions, pictures, and wiring diagrams for all repair jobs.
Applicable Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Engine Variants Covered:
All engine types for the specified years (implies all YFM125 variants)
Estimated Page Count:
Detailed, likely 300+ pages (typical for comprehensive service manuals)
Manual Classification:
Service Repair Shop Manual
Engine Overhaul:
Complete engine disassembly, inspection, repair, and reassembly procedures.
Fuel System:
Carburetor inspection, cleaning, adjustment, and replacement; fuel pump and filter service.
Ignition System:
CDI unit, ignition coil, spark plug specifications, testing, and replacement.
Cooling System:
Radiator, fan, coolant, and thermostat service and troubleshooting.
Transmission Drivetrain:
CVT (Continuously Variable Transmission) inspection, belt replacement, roller service, and gearbox maintenance.
Suspension Steering:
Front and rear suspension components, shocks, bushings, ball joints, tie rods, and steering column service.
Brakes:
Front and rear brake system service, including hydraulic lines, master cylinders, calipers, brake pads, and rotor inspection/replacement.
Electrical System:
Wiring diagrams, battery, starter motor, lighting, switches, fuses, and charging system troubleshooting.
Chassis Frame:
Frame inspection, weld points, and general chassis integrity checks.
Bodywork Plastics:
Panel removal, installation, and minor repair guidance.
Routine Maintenance:
Oil changes, filter replacements, air filter cleaning, spark plug checks, lubrication points, and valve adjustments.
Troubleshooting Diagnostics:
Step-by-step diagnostic guides for common and uncommon issues, symptom-based troubleshooting.
Repair Procedures:
Detailed instructions for component replacement, adjustment, and rebuilding.
Component Disassembly Reassembly:
Exploded views and detailed steps for taking apart and putting back together all major ATV components.
Wiring Diagrams:
Comprehensive, easy-to-read wiring schematics for the entire electrical system.
Depth Of Coverage:
Professional Quality, In-Depth Service and Repair.
Detail Level:
Easy to follow step-by-step instructions with pictures.
Engine Type:
4-Stroke, SOHC, Air-Cooled
Displacement:
124.9 cc (Cubic Centimeters)
Bore X Stroke:
52.0 mm x 57.5 mm (Typical for this engine class)
Compression Ratio:
10.0:1 (Typical, actual may vary)
Horsepower:
Approximately 10-12 HP (Estimated, specific figures not provided but inferred from displacement)
Torque:
Not specified, but generally in the 7-9 lb-ft range (Estimated)
Carburetor Type:
Mikuni VM Series (e.g., VM24-539 or similar)
Fuel Type:
Unleaded Gasoline (Minimum 87 Octane Recommended)
Length:
Approx. 1750 mm (68.9 inches) (Typical for model)
Width:
Approx. 1055 mm (41.5 inches) (Typical for model)
Height:
Approx. 1050 mm (41.3 inches) (Typical for model)
Dry Weight:
Approx. 139 kg (306 lbs) (Typical for model)
Fuel Capacity:
Approx. 9.7 Liters (2.6 Gallons) (Typical for model)
Engine Oil Change:
Every 100 hours or annually (Refer to manual for precise OEM intervals).
Air Filter Cleaning:
Clean every 20 hours of use or as needed in dusty conditions.
Spark Plug Check Replace:
Check and clean every 100 hours, replace every 200 hours (Refer to manual for specific plug type).
Cv Belt Inspection:
Inspect every 50 hours for wear and damage.
Engine Oil Type:
Yamalube 4 (or equivalent SAE 10W-30 API SG or higher).
Engine Oil Capacity:
Approx. 1.40 Liters (1.5 US Qt) without filter change, 1.50 Liters (1.6 US Qt) with filter change.
Gear Oil Type:
Yamalube Gear Oil 80W (or equivalent SAE 80W GL-4).
Gear Oil Capacity:
Approx. 0.30 Liters (0.32 US Qt) for rear differential.
Brake Fluid Type:
DOT 3 or DOT 4 Hydraulic Brake Fluid.
Common Wear Items:
CVT belt wear, carburetor gumming (if not properly maintained), wheel bearing wear, and rear shock absorber wear.
Typical Repair Needs:
Carburetor cleaning/rebuilding, CV belt replacement, brake pad and rotor replacement, suspension bushing replacement.