Target Audience:
Owners of Holden Commodore VE (2006-2013), independent repair shops, and automotive technicians.
Value Proposition:
Provides factory-level repair and maintenance data, enabling cost savings on servicing and repairs, empowering users with in-depth knowledge.
Content Highlight:
Step-by-step instructions, diagrams, illustrations, wiring schematics, and vehicle-specific specifications.
Accuracy:
Vehicle-specific, not generic; contains the same information used by authorized dealerships.
Engine Mechanical:
Detailed information on engine assembly, disassembly, overhaul, components, and performance tuning.
Engine Electrical:
Ignition system, starting and charging systems, sensor diagnostics, ECU operation, and wiring schematics.
Emission Control:
Catalytic converters, evaporative emission control (EVAP), exhaust gas recirculation (EGR), and emissions testing procedures.
Fuel System:
Fuel pump, injectors, fuel lines, fuel tank, pressure regulators, and diagnostic procedures.
Clutch System:
Clutch disc, pressure plate, release bearing, hydraulic system, and adjustment procedures.
Manual Transaxle:
Gearbox disassembly, inspection, repair, and fluid specifications.
Automatic Transaxle:
Transmission overhaul, electronic control systems, fluid changes, and diagnostic fault codes.
Driveshaft Axle:
CV joints, driveshafts, differentials, wheel bearings, and related components.
Suspension System:
Struts, shock absorbers, control arms, ball joints, bushings, and alignment specifications.
Steering System:
Power steering pump, rack and pinion, tie rod ends, and hydraulic system diagnostics.
Restraint System:
Airbag system components, seatbelt operation, SRS warning light diagnostics, and related safety systems.
Brake System:
Brake pads, rotors, calipers, master cylinder, ABS, EBD, and fluid specifications.
Body Interior Exterior:
Panel removal, trim components, door mechanisms, seat adjustments, and cosmetic repairs.
Body Electrical:
Lighting, power windows, central locking, wipers, horn, and dashboard illumination.
HVAC:
Air conditioning system, heater core, blower motor, refrigerant, and climate control diagnostics.
Maintenance:
Oil changes, filter replacements, spark plug replacement, coolant flushes, and brake fluid changes.
Troubleshooting:
Diagnostic flowcharts, symptom-based repair guides, and fault code interpretation.
Repair:
Step-by-step instructions for component removal, installation, and adjustment.
Diagnostics:
Use of diagnostic scan tools, sensor data analysis, and electrical circuit testing.
Depth:
Factory-level detail, suitable for both DIY enthusiasts and professional mechanics, covering routine maintenance to complete engine and transmission rebuilds.
Oil Change Interval:
Typically 15,000 km or 12 months, whichever comes first, for synthetic oil. Check specific engine and oil type.
Spark Plug Interval:
Varies by engine type; e.g., iridium plugs may have intervals of 100,000 km or more.
Engine Oil Spec:
Likely API SN/SP or ACEA A3/B4 compliant, with viscosities such as 5W-30 or 10W-30 depending on engine and climate.
Coolant Spec:
GM-spec orange coolant (e.g., Dex-Cool compatible) with a 50/50 mix of coolant and distilled water.
Brake Fluid Spec:
DOT 3 or DOT 4 brake fluid.
Common Wear Items:
Potential for worn suspension bushings, strut mounts, and catalytic converter issues.
Engine Specific:
Timing chain concerns on some early V6 Alloytec engines, oil consumption issues on certain variants.
