🏷️ Basic Information

Make:

Arctic Cat

Model:

ATV Series

Model Variant:

450 H1, 450 H1 TRV, 550 H1, 550 H1 TRV, 550 H1 TRV Cruiser, 650 H1, 650 H1 MudPro, 700 H1, 700 H1 TBX, 700 H1 TRV, 700 H1 TRV Cruiser, 700 H1 MudPro, 1000 H2, 1000 H2 TRV Cruiser, 1000 H2 MudPro

Year:

2011

Engine Code Prefix:

H1 (for 450, 550, 650, 700), H2 (for 1000)

👋 Introduction

Target Audience:

Owners of 2011 Arctic Cat 450/550/650/700/1000 ATVs seeking to perform maintenance, repairs, and diagnostics themselves, as well as professional ATV technicians.

Value Proposition:

Provides comprehensive, official repair information, enabling cost savings on professional servicing and empowering users with the knowledge to maintain and repair their ATVs effectively. Offers a complete resource for all aspects of ATV service.

Manual Content Highlight:

Includes hundreds of photos and illustrations, detailed diagrams, exploded views, wiring schematics, torque specifications, and step-by-step instructions for all repair and maintenance procedures.

📋 Manual Details

Vehicle Coverage:

Arctic Cat 450, 550, 650, 700, and 1000 series ATVs from the 2011 model year, including all listed sub-models and configurations (e.g., TRV, MudPro, TBX, Cruiser).

Total Pages:

275

Type:

Official Service & Repair Manual

Language:

English

Format:

Downloadable PDF

📖 Manual Coverage

Major Systems:

General Information/Specifications, Periodic Maintenance, Engine, Transmission, Fuel System, Lubrication System, Cooling System, Electrical System, Drive System, Suspension, Steering System, Frame, Controls, Indicators.

Repair And Maintenance:

Complete tear-down and rebuild procedures, detailed maintenance schedules, troubleshooting guides, diagnostic procedures, repair instructions, component testing, adjustments, lubrication, fluid changes, filter replacements, gasket and seal replacement, complete engine overhaul, transmission service, drive shaft and differential maintenance, brake system servicing, suspension component replacement, steering system repair, electrical system diagnostics and repair (including wiring schematics), bodywork and panel removal/installation.

Scope:

Comprehensive, covering everything from basic routine maintenance to complete engine and transmission rebuilds, advanced diagnostics, and detailed component-level repair. Suitable for both DIY enthusiasts and professional mechanics.

📊 Manual Specifications

Format:

PDF

Printability:

Fully Printable

Binding:

Digital (Downloadable PDF)

Paper Type:

N/A (Digital Format)

Usability Features:

Bookmarked for easy navigation, searchable text for quick information retrieval, zoomable for detailed viewing of illustrations and diagrams, instant download upon purchase.

Operating Systems:

Compatible with all versions of Windows and Mac OS.

⚙️ Engine Specifications

Engine Type:

Liquid-cooled, 4-stroke, SOHC (for H1 series). Specific displacement varies by model (e.g., approx. 443cc for 450, 493cc for 550, 695cc for 700). H2 engines are typically V-twin configurations (e.g., approx. 950cc).

Horsepower And Torque:

Detailed horsepower and torque figures for each specific engine displacement are provided within the manual. Manual covers tuning and performance adjustments.

Fuel Delivery:

Fuel Injection (EFI) systems are standard across most of these models. Manual covers fuel pump, injector servicing, throttle body cleaning and adjustment, and fuel pressure testing.

Cooling Method:

Liquid Cooling. Manual covers coolant type, capacity, flushing procedures, radiator, fan operation, thermostat testing, and water pump maintenance.

Oil Type And Capacity:

Specifies recommended engine oil viscosity grades (e.g., SAE 0W-40, 10W-40, 10W-50) and capacities for each engine variant. Covers oil filter replacement procedures and torque specifications.

🔧 Transmission

Type:

Automatic Continuously Variable Transmission (CVT) with Engine Braking System (EBS).

Features:

The manual covers servicing of the CVT, including belt inspection and replacement, clutch alignment, primary and secondary clutch maintenance, and roller replacement. It also details gear reduction ratios for high and low ranges.

Drive System Type:

Selectable 2WD/4WD with front differential lock. Manual provides procedures for servicing the drive shafts, CV joints, front and rear differentials, and the electronic 2WD/4WD engagement system.

📐 Dimensions

Length Width Height:

Dimensions vary by model (e.g., TRV models are longer to accommodate the 2-up seating). Specific overall dimensions, ground clearance, and wheelbase for each variant are detailed in the manual's specifications section.

Dry Weight And Towing:

Dry weight, curb weight, and Gross Vehicle Weight Rating (GVWR) are provided for each model. Towing capacities (if applicable) are also specified. This manual covers frame integrity and reinforcement for towing/hauling.

🛡️ Safety Features

Braking System:

Hydraulic disc brakes front and rear. Manual details brake caliper service, pad replacement, fluid type (DOT 3 or DOT 4), bleeding procedures, and master cylinder maintenance.

Rollover Protection:

While ATVs do not have traditional seat belts or airbags, the manual covers frame integrity, steering column safety, and the importance of proper rider gear and safe operating practices. It details potential issues related to chassis stability.

💡 Technology Features

Features:

Basic instrumentation cluster (speedometer, odometer, fuel gauge, warning lights). Manual covers diagnostics for the instrument panel and its associated sensors.

Electronic Systems:

Features like the electronic 2WD/4WD system, EBS (Engine Braking System), and digital instrumentation. Manual provides troubleshooting and repair for these electronic systems.

Electrical Schematics:

Complete wiring diagrams for all electrical components, including headlights, taillights, brake lights, indicator lights, starter system, charging system (stator, rectifier/regulator), and CDI ignition system, facilitating accurate electrical diagnostics.

🔧 Maintenance

Recommended Maintenance Schedule:

Detailed schedule covering initial break-in service, hourly/mileage-based inspections (e.g., every 20, 50, 100, 250 hours/miles), and annual checks for air filter cleaning/replacement, spark plug inspection/replacement, oil and filter changes, differential fluid changes, brake system checks, suspension lubrication, and drive belt inspection.

Oil And Coolant:

Specifies exact oil grades (e.g., SAE 0W-40, 10W-40, 10W-50 for engine; SAE 80W-90 for differentials), coolant type (ethylene glycol based antifreeze), and brake fluid type (DOT 3/4). Includes all fluid capacities.

Common Wear And Tear:

The manual implicitly addresses common wear items through its comprehensive service procedures. While not explicitly listing 'known issues', it provides the guidance to identify and rectify common problems such as CVT belt wear, suspension component wear, electrical connection corrosion, and exhaust system integrity.

Tire Pressure And Specifications:

Specifies recommended tire pressures for front and rear tires for various operating conditions. Wheel bolt pattern and torque specifications are also included.

📚 Vehicle History

Manufacturer:

Arctic Cat Inc., a manufacturer with a long history in powersports, particularly snowmobiles, and a significant presence in the ATV market.

Model Line Development:

The 2011 models represent a mature iteration of Arctic Cat's ATV platform, building upon previous generations with advancements in engine technology (H1 and H2 platforms), suspension, and features like the TRV 2-up seating. The MudPro variants are specialized for extreme mud riding.

Manufacturing Location:

Arctic Cat vehicles are primarily manufactured in Thief River Falls, Minnesota, USA.

🏆 Awards & Recognition

Industry Accolades:

Specific industry awards for the 2011 model year are not detailed in the provided product information. However, Arctic Cat ATVs are generally recognized for their off-road capability and performance, especially in utility and mud-riding segments.