Engine Mechanical:
Detailed procedures for all engine variants, including disassembly, inspection, assembly, and diagnostics.
Engine Management And Electronics:
ECM diagnosis, sensor testing, fuel injection systems, ignition systems, emissions control systems.
Transmission:
Covers both automatic and manual transmissions (if applicable to the F11 generation), including fluid changes, internal repairs, and electronic control unit (TCU) diagnostics.
Drivetrain:
Front and rear axle assemblies, differential, drive shafts, CV joints, transfer case (if applicable).
Suspension:
Front and rear suspension components, shock absorbers, springs, control arms, anti-roll bars, electronic suspension systems (e.g., adaptive drive).
Steering:
Power steering system (hydraulic or electric), steering rack, tie rods, steering column.
Brakes:
Brake system components (calipers, rotors, pads), hydraulic system, ABS, DSC, parking brake (mechanical/electronic).
Electrical System:
Comprehensive wiring diagrams, battery system, alternator, starter, fuses, relays, lighting systems, power distribution.
Body And Chassis:
Body panels, doors, hood, tailgate, interior trim, structural components, crash repair information.
HVAC:
Heating, ventilation, and air conditioning systems, refrigerant handling, climate control unit.
Infotainment And Navigation:
iDrive system, audio systems, navigation unit, telematics.
Safety Systems:
Airbag systems, seat belt pretensioners, advanced driver assistance systems (ADAS) components.
Routine Maintenance:
Oil changes, filter replacements, spark plug changes, fluid level checks and top-offs, brake pad/rotor replacement.
Scheduled Maintenance:
Detailed breakdown of service intervals and required tasks based on mileage and time.
Troubleshooting:
Diagnostic procedures for common and uncommon faults, fault code interpretation.
Component Removal And Installation:
Step-by-step guides for removing and installing virtually all vehicle components.
Rebuilding And Overhaul:
Detailed instructions for overhauling engines, transmissions, and other major assemblies.
Diagnostics:
Guidance on using diagnostic tools, interpreting sensor data, and pinpointing issues.
Depth:
Comprehensive, covering everything from basic maintenance to complex diagnostics and full component rebuilds.
Engine Options:
The F11 generation (including the 2013 model year) offered a wide range of petrol and diesel engines. Common examples include the N52/N55 (3.0L inline-6 petrol), N20 (2.0L inline-4 turbo petrol), N57 (3.0L inline-6 turbo diesel), and N47 (2.0L inline-4 turbo diesel).
Engine Power Range:
Varies significantly by engine, from approximately 184 hp (520d) to over 450 hp (M550d xDrive).
Engine Torque Range:
Varies significantly by engine, from approximately 290 Nm to over 740 Nm.
Injection Type:
Direct injection (petrol and diesel) with common rail technology for diesels.
Length:
Approx. 4,910 mm (193.3 in)
Width:
Approx. 1,860 mm (73.2 in)
Height:
Approx. 1,462 mm (57.6 in)
Wheelbase:
Approx. 2,968 mm (116.9 in)
Cargo Volume:
Approx. 560 liters (rear seats up), 1,670 liters (rear seats folded).
Curb Weight:
Varies by engine and configuration, typically ranging from 1,700 kg to 1,950 kg.
Euro Ncap Rating:
Likely 5-star rating (based on typical BMW safety performance in this era).
Active Safety Systems:
Dynamic Stability Control (DSC), Anti-lock Braking System (ABS), Traction Control System (TCS), Dynamic Traction Control (DTC), Cornering Brake Control (CBC), Electronic Differential Lock Control.
Driver Assistance Options:
Adaptive Cruise Control (ACC), Lane Departure Warning, Blind Spot Detection, Surround View cameras, Parking Assistant.
Passive Safety Features:
Multiple airbags (front, side, curtain), active headrests, advanced crumple zones, reinforced safety cell.
Infotainment System:
iDrive (e.g., CIC or NBT Professional Navigation system) with high-resolution display, hard drive, USB interface, Bluetooth connectivity, optional voice control.
Driver Assistance Features:
Advanced driver assistance systems (ADAS) available, including adaptive cruise control, lane keeping assist, blind spot monitoring, front collision warning with pedestrian detection, parking sensors, and rearview cameras.
Connectivity Options:
BMW ConnectedDrive services, allowing integration with smartphones, real-time traffic information, remote services, and emergency call functionality.
Oil Change Interval:
Variable interval system (Condition Based Service - CBS), typically ranging from 10,000 to 30,000 km (or 1-2 years), depending on driving conditions and engine type. Consult manual for specifics.
Brake Fluid Change:
Typically every 2 years.
Coolant Change:
First change typically around 4 years or 100,000 km, subsequent changes more frequent (e.g., every 2 years).
Engine Oil Specification:
Varies by engine. Common specifications include BMW Longlife-01 (LL-01), BMW Longlife-04 (LL-04). Viscosity grades like 0W-30, 5W-30, 0W-40 are common. (Specific part numbers and grades detailed in manual).
Transmission Fluid Type:
Automatic transmission fluid specifications are proprietary and vary by gearbox manufacturer (e.g., ZF 8HP uses specific ATF. Manuals will list correct fluid types and capacities).
Coolant Specification:
BMW Blue or similar ethylene glycol-based coolant, typically BMW P/N 83 51 2 352 198 or equivalent.
Common Wear Items:
Turbocharger issues (diesel engines), DPF regeneration problems (diesel), oil leaks (various engines), suspension component wear (bushings, ball joints), water pump failures, ignition coil failures (petrol). Electronic control module failures can also occur.
Transmission Common Issues:
Mechatronic unit issues in automatic transmissions, torque converter wear.
