Target Audience:
Farm owners, agricultural technicians, mechanics, and restoration enthusiasts
Value Proposition:
Provides the necessary technical expertise to maintain and repair the Case IH Farmall 115U efficiently and effectively.
Manual Superiority:
Offers a level of detail comparable to OEM service manuals, often exceeding the scope of basic owner's manuals.
Comprehensiveness:
Covers all major systems and components for a holistic approach to repair and maintenance.
Diagrams And Illustrations:
Includes detailed diagrams, schematics, and exploded views to aid in understanding complex procedures.
Engine Service:
Engine disassembly, inspection, assembly, and troubleshooting
Fuel System:
Fuel injection system, fuel pump, filters, and lines
Cooling System:
Radiator, water pump, thermostat, hoses, and coolant specifications
Lubrication System:
Oil pump, oil filter, lubrication points, and oil specifications
Electrical System:
Starting system, charging system, lighting, wiring diagrams, and diagnostics
Transmission Service:
Transmission disassembly, inspection, assembly, and troubleshooting (e.g., Powershift, H-Pattern)
Hydraulic System:
Hydraulic pump, control valves, cylinders, hydraulic fluid specifications, and troubleshooting
Pto System:
Power Take-Off (PTO) operation, maintenance, and repair
Axles And Drive Shafts:
Front and rear axle repair, differential service, and drive shaft maintenance
Braking System:
Brake system components, maintenance, and repair
Steering System:
Steering components, hydraulic steering assist, and repair procedures
Operator Station:
Cab components, controls, instrumentation, and HVAC service
Body And Chassis:
Frame, fenders, hood, and related components
Routine Maintenance:
Oil changes, filter replacements, lubrication, and general inspections
Troubleshooting Guides:
System-specific diagnostic procedures and common fault identification
Component Rebuilding:
Detailed instructions for rebuilding major components like engines and transmissions
Adjustment Procedures:
Calibration and adjustment of various systems (e.g., clutch, brakes)
Torquing Specifications:
Crucial torque values for fasteners across all systems
Depth Level:
Expert-level detail for professional technicians and experienced mechanics
Diagnostic Capabilities:
In-depth diagnostic procedures, including symptom analysis and corrective actions
Special Tools Required:
Identification of specific tools and equipment needed for certain repairs
Engine Model:
Likely Case IH F5C or similar common tractor engine (Specific model number depends on exact build year, requires manual lookup)
Engine Type:
Diesel, turbocharged (Typical for this class)
Engine Displacement:
Typically in the 3.4L to 4.5L range, depending on specific engine variant (e.g., FPT Industrial F5C variant)
Rated Horsepower:
Approximately 115 horsepower (as indicated by model number)
Peak Torque:
Refer to manual for specific torque figures, typically in the 450-550 Nm range
Fuel Injection Type:
Common Rail Direct Injection (CRDI), likely electronically controlled
Engine Oil Type:
API CJ-4 or equivalent (e.g., SAE 15W-40, check manual for exact spec)
Coolant Type:
Ethylene Glycol based, OAT (Organic Acid Technology) coolant (e.g., Case IH ACC Ucilene Plus)
Transmission Type:
Powershift (e.g., 16x16 or 32x32 option typical for this model range)
Optional Transmission:
Some configurations might offer a synchronized H-pattern transmission
Clutch Type:
Wet, multi-disc clutches for Powershift
Transmission Fluid:
UTTO (Universal Tractor Transmission Oil) or UTF (Universal Tractor Fluid), check manual for exact specification and CASE IH part number
Pto Options:
Standard 540/1000 RPM PTO, potentially with ground speed PTO option
Length:
Refer to manual for exact dimensions; typically around 4.5-5.0 meters
Width:
Refer to manual for exact dimensions; typically around 2.0-2.5 meters (without attachments)
Wheelbase:
Refer to manual for exact dimensions; typically around 2.4-2.6 meters
Operating Weight:
Approximately 4,500 - 5,500 kg (unballasted)
Max Allowable Weight:
Refer to manual for specific GVWR
Rollover Protection:
ROPS (Roll Over Protective Structure) standard, FOPS (Fall on Protective Structure) may be optional
Braking System Type:
Hydraulic, wet disc brakes
Parking Brake:
Independent mechanical or hydraulic parking brake
Seat Belt:
Standard seat belt
Lighting:
Work lights, turn signals, brake lights
Engine Oil Change Interval:
Typically 250-500 hours, refer to manual for exact recommendation based on operating conditions and oil type
Fuel Filter Replacement:
Typically 250-500 hours, or as per diagnostic indicators
Hydraulic Fluid Change:
Typically 1000-2000 hours, depending on usage and fluid condition
Hydraulic Fluid Type:
UTTO/UTF (refer to manual for specific CASE IH part number and viscosity)
Transmission Fluid Capacity:
Refer to manual for precise capacity, typically 40-60 liters
Common Wear Items:
Clutch packs in Powershift transmission, hydraulic pump wear, EGR valve issues (on some emission-compliant models)
Air Filter Cleaning:
Regular inspection and cleaning/replacement based on operating environment (dusty conditions require more frequent attention)
Case Ih Legacy:
Case IH is a well-established agricultural machinery manufacturer with a history dating back to the 19th century, known for its robust and reliable tractors.
Farmall Lineage:
The Farmall nameplate has a long and storied history in agriculture, evolving from early iconic row-crop tractors to modern versatile utility tractors like the 115U.
Production Era:
The Farmall U series, including the 115U, was introduced in the late 2000s/early 2010s, representing a modern generation of utility tractors.
Manufacturing Location:
Case IH tractors are manufactured globally, with key facilities in North America and Europe. Specific location for 115U may vary by market and production year.
