Engine Mechanical:
Engine assembly, cylinder head, block, crankshaft, pistons, connecting rods, camshafts, timing system, lubrication, cooling.
Engine Performance:
Fuel injection system, ignition system, emissions control, turbocharger/supercharger (if applicable), engine management system (ECU).
Transmission Mechanical:
Transmission assembly, torque converter, gearsets, clutch packs, seals, bearings, cooling lines.
Transmission Electronic:
Transmission control module (TCM), sensor inputs/outputs, shift solenoids, hydraulic control.
Drivetrain:
Driveshafts, differentials, axles, CV joints, transfer case (if applicable).
Suspension:
Front suspension (control arms, struts, springs, ball joints, sway bars), rear suspension (multi-link, control arms, springs, shocks, sway bars).
Steering:
Power steering pump, steering rack/gearbox, steering column, tie rods, power steering fluid.
Brakes:
Brake system components (master cylinder, brake lines, calipers, rotors, pads), ABS system, parking brake.
Electrical System:
Battery, charging system (alternator), starting system (starter motor), fuses, relays, wiring diagrams, lighting system.
Body And Chassis:
Body panels, doors, hood, trunk, bumpers, glass, interior trim, chassis components, rust prevention.
HVAC:
Heating, ventilation, and air conditioning system components, refrigerant, climate control module.
Infotainment And Electronics:
Radio, navigation system, speakers, power windows, power locks, mirrors, instrument cluster, airbags.
Scheduled Maintenance:
Oil changes, filter replacements, fluid checks and changes, tire rotations, brake inspections.
Troubleshooting:
Diagnostic procedures for common and uncommon faults, error code interpretation, symptom-based troubleshooting.
Repair Procedures:
Step-by-step instructions for component removal, installation, and repair of all vehicle systems.
Rebuilding:
Detailed instructions for engine and transmission overhauls.
Refurbishing:
Procedures for bringing worn components back to specified condition.
Restoration:
Guidance for bringing older vehicles back to original or enhanced specifications.
Depth:
Comprehensive, from basic maintenance to advanced diagnostics and complete component rebuilds. Equivalent to factory service information.
NHTSA Front Impact Rating:
5-Star (for driver and passenger in most configurations)
IIHS Side Impact Rating:
Good (in most configurations)
Active Safety Features:
Anti-lock Braking System (ABS), Electronic Stability Control (ESC), Traction Control System (TCS), Brake Assist.
Passive Safety Features:
Front airbags, side-impact airbags, curtain airbags, front and rear crumple zones, body-on-frame construction (part of LX platform architecture).
Oil Change Interval:
Every 6,000 - 7,500 miles or 6 months, whichever comes first (consult owner's manual for specific driving conditions).
Tire Rotation Interval:
Every 6,000 - 7,500 miles.
Transmission Fluid Change Interval:
Refer to manual, often around 60,000 - 100,000 miles, depending on usage and fluid type.
Engine Oil Specification:
SAE 5W-40 Synthetic (for SRT8 HEMI V8). Consult manual for exact spec and capacity (typically around 7 quarts).
Coolant Specification:
Mopar OAT (Organic Additive Technology) Antifreeze/Engine Coolant, 5-Year/100,000-Mile Formula (often pink or orange).
Brake Fluid Specification:
DOT 3 or DOT 4, depending on model year and system.
Common Issues:
Early models may experience issues with the TIPM (Totally Integrated Power Module), various sensor failures (e.g., ABS sensors, camshaft/crankshaft sensors), potential for rust on specific body panels, and transmission solenoid issues in some automatic transmissions.
