Engine:
Detailed overhaul, diagnosis, tuning, repair procedures for gasoline engines
Engine Management:
Ignition, fuel injection, emissions control systems
Transmission:
Automatic transmission service, repair, and diagnosis
Drivetrain:
Axles, driveshafts, differential service
Brakes:
Hydraulic system, ABS (if equipped), disc/drum brake service, component replacement
Suspension:
Front and rear suspension components, alignment, shock absorbers, springs
Steering:
Power steering system, steering column, linkage service
Electrical:
Wiring diagrams, component testing, starter, alternator, battery service
HVAC:
Heating, ventilation, and air conditioning system diagnosis and repair
Body:
Exterior and interior trim, doors, windows, glass, body panel repair
Chassis:
Frame, subframes, and structural component information
Interior:
Seats, dashboard, consoles, trim panels, upholstery
Lighting:
Headlamps, taillamps, interior lighting service
Fuel:
Fuel tank, pump, lines, and filter service
Cooling:
Radiator, water pump, thermostat, hoses, and coolant service
Exhaust:
Exhaust manifold, catalytic converter, muffler, and pipe service
Maintenance:
Scheduled maintenance, fluid changes, filter replacements
Troubleshooting:
Systematic diagnostic procedures for common and complex issues
Repair:
Step-by-step instructions for component removal, disassembly, repair, and reassembly
Installation:
Procedures for installing new or replacement parts and components
Adjustments:
Precise instructions for adjusting various systems (e.g., brakes, clutch, ignition timing if applicable)
Diagnostics:
Diagnostic flowcharts, symptom-to-cause analysis, electrical diagnostic procedures
Technical Specifications:
Detailed specifications for all systems, including measurements, tolerances, and capacities
Depth:
Extremely detailed, covering everything from basic fluid checks to full engine and transmission rebuilds
Diagrams And Photos:
Abundant pictorial diagrams, exploded views, and photographs to guide repair procedures
Tool References:
Specific references to required special service tools and their usage
PDF Quality:
High resolution, ensuring clarity of text and diagrams
Printability:
Fully printable, allowing users to print specific sections or the entire manual
Binding:
N/A (Digital Download - PDF format)
Paper Quality:
N/A (Digital Download - PDF format)
Operating Systems:
Compatible with Windows, Mac, and Linux OS
Reader Software:
Adobe Reader (or compatible PDF reader)
Engine Code:
3.8L V6 was also available in some markets, but the Imperial typically featured a larger V8, likely a variant of the Chrysler Small Block or Magnum V8 family. The most common engine for these years was the 3.3L V6 or the optional 3.8L V6.
Displacement:
3.3 Liters (201 cu in)
Horsepower Est:
147 hp @ 4400 rpm (3.3L V6)
Torque Est:
180 lb-ft @ 3200 rpm (3.3L V6)
Displacement:
3.8 Liters (231 cu in)
Horsepower Est:
162 hp @ 4400 rpm (3.8L V6)
Torque Est:
200 lb-ft @ 3200 rpm (3.8L V6)
Fuel Delivery:
Electronic Fuel Injection (EFI)
Ignition Type:
Distributorless Ignition System (DIS) or Distributor-based system depending on year and specific engine
Oil Change Interval:
Typically every 3,000-7,500 miles or 6-12 months, depending on driving conditions and oil type used (consult manual for specifics)
Transmission Fluid Change Interval:
Every 30,000-60,000 miles or as specified in the manual
Spark Plug Replacement:
Refer to manual for specific interval, often between 30,000-100,000 miles depending on spark plug type
Engine Oil Type:
API SG or SH, SAE 5W-30 or 10W-30 (refer to manual for exact viscosity and capacity)
Coolant Type:
Chrysler Recommended Ethylene Glycol Antifreeze (50/50 mix with distilled water)
Common Problems:
Potential issues include A/C system leaks, transmission solenoid failures, electrical connector corrosion, power window/lock mechanisms, and intake manifold gasket leaks.
Importance Of Torque:
Manual provides precise torque specifications for critical fasteners to ensure proper assembly and prevent damage.
