Segment:
Lightweight scooter, often positioned for urban commuting and economical transportation.
Design Philosophy:
Compact, fuel-efficient, and user-friendly design for everyday use.
Target Audience:
New riders, commuters, and those seeking an affordable and practical mode of transport.
Electrical Systems:
Complete coverage of all electrical circuits, including ignition, lighting, starting, charging, fuel injection, instrumentation, and accessories.
Component Locations:
Diagrams indicate the physical location of key electrical components within the vehicle's chassis and body.
Connector Pinouts:
Detailed pinout information for all electrical connectors, crucial for troubleshooting and repair.
Fuse Relay Diagrams:
Specific diagrams illustrating the layout and function of all fuses and relays in the vehicle's electrical system.
Total Pages:
Estimated 20-30 pages (typical for specialized wiring diagram manuals).
Type:
Specialized Technical Manual
Ignition System:
Wiring for CDI (Capacitor Discharge Ignition) unit, ignition coil, spark plug, and associated sensors.
Lighting System:
Headlights (low and high beam), tail lights, brake lights, turn signals, hazard lights, and dashboard illumination circuits.
Starting Charging System:
Wiring for starter motor, starter relay, ignition switch, alternator (or generator), voltage regulator, and battery connections.
Fuel System:
Wiring for fuel pump, fuel injector (if applicable), throttle position sensor (TPS), idle air control (IAC) valve, and engine control unit (ECU) connections.
Instrumentation Gauges:
Wiring for speedometer, tachometer, fuel gauge, temperature gauge, warning lights (oil pressure, battery, engine check, etc.).
Cooling System:
Wiring for radiator fan motor and its relay/sensor.
Horn And Switches:
Wiring for horn, horn button, handlebar controls (light switches, starter button, kill switch), and brake light switches.
Troubleshooting:
Facilitates diagnosis of electrical faults by tracing circuit paths and identifying potential breakages, shorts, or open circuits.
Component Replacement:
Aids in correctly identifying and connecting replacement electrical components.
Custom Wiring:
Provides a baseline for understanding existing circuits if modifications or additions are planned.
Depth:
Detailed circuit diagrams showing wire colors, gauge sizes, and component connections.
Diagnostic Aid:
Essential for diagnosing electrical issues such as intermittent faults, non-functioning components, or battery drain.
Engine Type:
4-stroke, Air-cooled
Displacement:
Typically around 100cc - 125cc (exact displacement may vary by specific S Five variant/year). Example: 100cc for some models.
Bore X Stroke:
Varies by exact model, but typical for this class might be in the range of 50mm x 49.5mm.
Compression Ratio:
Typically around 9.5:1 to 10.5:1.
Horsepower:
Estimated 7-9 HP @ 7500-8000 RPM (dependent on exact engine size).
Torque:
Estimated 7-8 Nm @ 6000-7000 RPM (dependent on exact engine size).
Fuel Delivery:
Carbureted or Fuel Injection (FI) depending on the specific model year and market. Older models typically carbureted.
Fuel Type:
Unleaded Gasoline
Fuel Tank Capacity:
Approximately 4.0 - 5.0 Liters.
Length:
Approximately 1800 - 1900 mm.
Width:
Approximately 650 - 750 mm.
Height:
Approximately 1100 - 1200 mm.
Dry Weight:
Approximately 90 - 105 kg.
Gross Vehicle Weight Rating:
Approx. 230 - 250 kg (including rider and cargo).
Wheelbase:
Approximately 1250 - 1300 mm.
Front Tire Size:
Typically 90/90-10 or similar.
Rear Tire Size:
Typically 100/90-10 or similar.
Wheel Type:
Cast aluminum alloy wheels common.
Instrument Cluster:
Analog speedometer and tachometer, fuel gauge, and indicator lights. Some models may have digital elements.
Headlight Type:
Halogen bulb (typically H4 or similar) for headlights.
Bluetooth Audio:
Not typically equipped on standard models from this era.
Oil Change:
Recommended every 1,000 - 2,000 km or every 6 months, whichever comes first (refer to specific model year manual for exact interval).
Air Filter Replacement:
Typically every 4,000 - 6,000 km, or as needed based on operating conditions.
Spark Plug Replacement:
Recommended every 6,000 - 10,000 km.
Cv Belt Inspection Replacement:
Inspection every 6,000 km, replacement typically around 12,000 - 20,000 km.
Engine Oil Type:
API SG or higher, SAE 10W-30 or 10W-40 semi-synthetic or synthetic motorcycle oil.
Engine Oil Capacity:
Approximately 0.8 - 1.0 Liters (check dipstick or fill plug level).
Transmission Oil:
Not applicable, as it uses a CVT with internal lubrication from engine oil.
Coolant Type:
N/A (typically air-cooled engines).
Electrical Connectors:
Corrosion or loose connections in wiring harness can lead to intermittent electrical faults.
Starter Motor Solenoid:
Occasional failure of the starter solenoid can prevent starting.
Carburetor Adjustment:
Carbureted models may require periodic adjustment due to fuel variations or wear.
Manufacturer:
Daelim Motor Co., Ltd. is a South Korean manufacturer of motorcycles and scooters.
Introduction Period:
The S Five series was introduced in the early to mid-2000s, becoming a popular model in Daelim's scooter lineup.
Engine Variants:
Has seen various engine displacements (e.g., 100cc, 110cc) and minor cosmetic updates over its production run.
Manufacturing Origin:
South Korea
