Engine Mechanical:
        
        
            Detailed component removal, inspection, repair, and reassembly for cylinder head, block, pistons, crankshaft, camshafts, timing system.
        
     
    
        
            Engine Management:
        
        
            ECU operation, sensor identification and testing (MAP, TPS, O2, CKP, CMP), actuator control (injectors, ignition coils), diagnostic trouble codes (DTCs) and their meanings.
        
     
    
        
            Fuel And Emissions:
        
        
            Fuel pump operation, fuel injectors, pressure regulator, evaporative emission control (EVAP), catalytic converter function, fuel filter replacement.
        
     
    
        
            Cooling And Lubrication:
        
        
            Radiator, water pump, thermostat, coolant types and capacities, oil pump, oil filter, oil pressure specifications, lubrication points.
        
     
    
        
            Ignition System:
        
        
            Spark plugs, ignition coils, distributor (if applicable), ignition timing, ignition control module troubleshooting.
        
     
    
        
            Automatic Transmission:
        
        
            Torque converter, gear sets, clutch packs, valve body operation, transmission fluid type and capacity, service and overhaul procedures.
        
     
    
        
            Manual Transmission:
        
        
            Clutch operation, gear engagement, transmission fluid specifications, clutch fluid, service and overhaul procedures.
        
     
    
        
            Brake System:
        
        
            Front and rear brake component identification (rotors, calipers, pads), hydraulic system layout, bleeding procedures, ABS system operation and diagnosis.
        
     
    
        
            Suspension And Steering:
        
        
            Front and rear suspension components (struts, shocks, control arms, bushings), steering rack and pinion, power steering system, wheel alignment specifications.
        
     
    
        
            Electrical Diagnostics:
        
        
            Wiring diagrams for all major systems, fuse box locations and identification, relay functions, battery and charging system testing.
        
     
    
        
            Lighting System:
        
        
            Headlight, taillight, interior lighting, bulb types and replacement procedures.
        
     
    
        
            HVAC System:
        
        
            Blower motor, evaporator, condenser, refrigerant charging, cabin air filter replacement, diagnostic procedures for climate control.
        
     
    
        
            Body Exterior:
        
        
            Door panel removal, bumper replacement, glass replacement, body panel alignment, paint repair guidelines.
        
     
    
        
            Interior Components:
        
        
            Seat removal, dashboard disassembly, instrument cluster service, headliner replacement.
        
     
    
    
        
            Routine Maintenance:
        
        
            Oil changes, filter replacements, fluid level checks and top-offs, tire rotations, spark plug replacement, belt inspection and replacement.
        
     
    
        
            Component Removal And Installation:
        
        
            Step-by-step instructions for removing and reinstalling all major components, including engine, transmission, brakes, suspension parts, and body panels.
        
     
    
        
            Troubleshooting Guides:
        
        
            Systematic approach to diagnosing common and uncommon problems, with symptom-based guides and component testing procedures.
        
     
    
        
            Diagnostic Procedures:
        
        
            Detailed instructions for using diagnostic tools, reading fault codes, and performing live data analysis.
        
     
    
        
            Overhaul And Rebuild:
        
        
            Complete instructions for rebuilding engines, transmissions, and other major mechanical assemblies, including specifications for machining and clearances.
        
     
    
        
            Electrical Repairs:
        
        
            Wiring repair techniques, connector servicing, component replacement, and troubleshooting of electrical faults.
        
     
    
        
            Specifications And Tolerances:
        
        
            Precise torque values for fasteners, engine bearing clearances, piston ring gap, valve lash, and other critical specifications.
        
     
    
        
            Fluid Capacities And Types:
        
        
            Exact fluid requirements for engine oil, transmission fluid, coolant, brake fluid, power steering fluid, and more.
        
     
    
        
            Wheel Alignment Procedures:
        
        
            Specifications for camber, caster, and toe angles, along with procedures for adjustment.
        
     
    
    
        
            Depth:
        
        
            Comprehensive: Covers everything from basic preventative maintenance to in-depth mechanical and electrical repairs, including complete unit overhauls and advanced diagnostics.
        
     
 
    
    
    
        
            Engine Oil And Filter:
        
        
            Every 7,500 miles (12,000 km) or 6 months, whichever comes first (refer to manual for exact conditions).
        
     
    
        
            Air Filter:
        
        
            Inspect every 15,000 miles (24,000 km), replace as needed or every 30,000 miles (48,000 km).
        
     
    
        
            Spark Plugs:
        
        
            Replace every 60,000 miles (96,000 km) with recommended iridium or platinum plugs.
        
     
    
        
            Transmission Fluid Automatic:
        
        
            Inspect every 30,000 miles (48,000 km), replace every 60,000 miles (96,000 km) or as per severe service schedule.
        
     
    
        
            Transmission Fluid Manual:
        
        
            Inspect every 30,000 miles (48,000 km), replace every 75,000 miles (120,000 km).
        
     
    
        
            Coolant:
        
        
            Flush and replace every 30,000 miles (48,000 km) or 2 years.
        
     
    
    
        
            Power Steering Fluid:
        
        
            GM Power Steering Fluid or Dexron III ATF.
        
     
    
        
            Brake Fluid:
        
        
            DOT 3 or DOT 4 Brake Fluid.
        
     
    
    
        
            Engine Mounts:
        
        
            Can degrade over time, leading to vibration.
        
     
    
        
            Ignition Coils:
        
        
            Can fail, causing misfires and rough running.
        
     
    
        
            Cooling System:
        
        
            Radiator hoses and water pump can develop leaks.
        
     
    
        
            Exhaust Manifold:
        
        
            Can develop cracks, leading to exhaust leaks and ticking noises.
        
     
    
        
            Automatic Transmission:
        
        
            Can exhibit harsh shifting or slipping if fluid is not maintained.