Target Audience:
DIY car owners, independent repair shops, and automotive technicians seeking detailed, vehicle-specific repair information for the 2010 Daihatsu Boon.
Value Proposition:
Offers dealership-level repair information in a convenient digital format, saving time and money compared to relying solely on professional mechanics or generic repair guides.
Highlighted Benefits:
Vehicle-specific, comprehensive A-Z coverage, step-by-step instructions, diagrams, illustrations, wiring schematics, printable format, ease of use.
Geographic Coverage:
Likely covers models sold in Japan and potentially other markets where the Daihatsu Boon was officially distributed. Specific regional variations are not detailed in the product description.
Page Count:
Not specified (However, the description implies a comprehensive, all-encompassing manual, suggesting a substantial page count.
Manual Type:
Service and Repair Manual
Engine Management:
Includes Engine Control System, Fuel Service Specifications, Emission Control, Intake/Exhaust/Cooling systems, Lube, Ignition, Starting and Charging.
Drivetrain:
Covers Automatic Transmission, Clutch, Manual Transmission, Transfer/Propeller Shaft, Drive Shaft, Differential, and Axle.
Chassis:
Includes Suspension, Tire & Wheel, Brake Control, Brakes, Parking Brake, and Steering Column.
Electrical Electronics:
Extensive coverage including Power Steering, Air Conditioning, Supplemental Restraint System (SRS), Seat Belts, Engine Immobilizer, Cruise Control, Wiper & Washer, Door Lock, Meter/Audio/Visual, Horn, Windshield/Glass/Mirror, Instrument Panel, Electrical systems, and Multiplex/CAN Communication.
Body Interior:
Covers Seats, Engine Hood/Door, Exterior & Interior components.
Maintenance Procedures:
Routine maintenance, fluid changes, filter replacements, inspection schedules.
Diagnostic Procedures:
Step-by-step diagnostic instructions for troubleshooting various systems, including fault code identification and resolution.
Repair Procedures:
Complete step-by-step instructions for disassembling, repairing, and reassembling virtually all mechanical and electrical components.
Technical Specifications:
Detailed specifications for all components, including torque values, clearances, fluid types and capacities, electrical resistance values, etc.
Wiring Schematics:
Comprehensive wiring diagrams for all vehicle systems, crucial for electrical diagnostics and repair.
Depth Of Coverage:
Factory-level detail, covering everything from basic maintenance to complex diagnostics and complete component rebuilds. Explicitly stated as not generic, but vehicle-specific.
Searchable Text:
Implied by PDF format and user-friendliness, though not explicitly stated as OCR'd.
Print Capability:
Fully printable, allowing users to print specific pages or sections as needed. Images can be enlarged for clarity.
Binding Type:
Digital (PDF) - No physical binding.
Paper Type Suitability:
Suitable for printing on standard paper, with the option to print enlarged diagrams for workshop use.
Operating Systems:
Windows (Vista 32/64, XP, ME, 98, NT, 2000) and Mac compatible.
Software Requirements:
Adobe PDF Reader and Winzip (free online).
Engine Options Common:
The 2nd generation Daihatsu Boon was typically offered with 1.0L (e.g., KF-VE) and 1.3L (e.g., K3-VE) gasoline engines. Specific engine codes and configurations would be detailed within the manual.
Engine Displacement Range:
Approximately 996cc to 1329cc (depending on specific engine variant).
Horsepower And Torque Details:
Specific horsepower and torque figures are engine-dependent and will be found within the manual's detailed specifications.
Fuel Delivery System:
Likely features Electronic Fuel Injection (EFI).
Engine Control Unit:
Details on ECU operation, sensors, actuators, and diagnostic troubleshooting are covered under 'Engine Control System'.
Standard Transmission Type:
Typically a 4-speed automatic transmission (e.g., Jatco JF403E or similar Daihatsu unit) or a Continuously Variable Transmission (CVT) depending on market and trim.
Optional Transmission Type:
Manual transmission variants may have been available in certain markets.
Transmission Fluid Specifications:
The manual will specify the correct type and quantity of automatic transmission fluid (ATF) or CVT fluid required.
Exterior Dimensions General:
As a compact hatchback, dimensions are relatively small, designed for urban maneuverability. Specific Length, Width, Height, and Wheelbase figures will be in the manual.
Curb Weight Range:
Curb weights typically range from approximately 900-1000 kg, depending on engine and transmission.
Crash Test Ratings:
Specific crash test ratings (e.g., JNCAP, Euro NCAP) for the 2010 model would need to be cross-referenced, but the manual covers related systems.
Active Safety Systems:
While advanced active safety features might be limited in this segment/era, systems like ABS (Anti-lock Braking System) and potentially EBD (Electronic Brakeforce Distribution) would be covered.
Passive Safety Systems:
Includes detailed information on the Supplemental Restraint System (SRS - airbags), seat belts, and their associated control modules and sensors.
Infotainment Systems Covered:
Includes coverage for the Meter, Audio/Visual systems, and associated wiring.
Driver Assistance Features Covered:
Covers systems like Cruise Control, if equipped.
Multiplex Can Communication:
Detailed information on the Multiplex/CAN communication systems, which are integral to modern vehicle electronic networks, is included.
Oil Change Interval Typical:
Typical intervals are around 5,000-10,000 km or 6-12 months, with specific recommendations in the manual based on driving conditions.
Engine Oil Grade:
Likely requires a low-viscosity synthetic or semi-synthetic oil, such as 0W-20 or 5W-30, as specified in the manual for the respective engine.
Coolant Type:
Requires a specific type of ethylene glycol-based antifreeze/coolant, likely a pink or red long-life type. The manual will specify the exact Daihatsu or Toyota-compatible coolant.
Brake Fluid Type:
Typically DOT 3 or DOT 4 brake fluid, to be confirmed in the manual.
Common Wear Items:
As with many compact cars, common wear items include brake pads/rotors, suspension components (bushings, shocks), and potentially exhaust systems. The manual provides guidance for inspection and replacement.
Engine Specific Considerations:
The KF-VE engine series is generally reliable but can be sensitive to oil maintenance. The manual's diagnostic section would be key for any specific engine issues.
Daihatsu Heritage:
Daihatsu, a subsidiary of Toyota, has a long history specializing in compact and fuel-efficient vehicles.
Boon Generation Transition:
The 2nd generation (launched around 2004/2005, with the 2010 model being a mid-cycle refresh or continuation) built upon the compact city car concept of its predecessor.
Manufacturing Location:
Primarily manufactured in Japan.
