Engine:
Comprehensive diagnostics, repair, and overhaul procedures for all engine variants.
Fuel System:
Carburetor adjustment, fuel pump, fuel lines, fuel tank maintenance, and troubleshooting.
Ignition System:
Distributor, coil, spark plugs, timing adjustments, and troubleshooting.
Cooling System:
Radiator, water pump, thermostat, hoses, and coolant specifications.
Exhaust System:
Muffler, exhaust pipes, catalytic converter (if applicable), and gasket replacement.
Transmission:
Manual and potentially automatic transmission overhaul, clutch replacement, and fluid specifications.
Drivetrain:
Front axle, rear axle, driveshafts, CV joints (if applicable), and differential maintenance.
Brakes:
Hydraulic system, brake pads/shoes, drums/discs, master cylinder, wheel cylinders, and bleeding procedures.
Suspension:
Front and rear suspension components, shock absorbers, springs, ball joints, and alignment.
Steering:
Steering column, steering box/rack, tie rods, and power steering system (if equipped).
Electrical System:
Battery, alternator, starter motor, lighting, gauges, fuses, wiring diagrams, and troubleshooting.
Body And Chassis:
Body panels, doors, hood, trunk, interior trim, and frame components.
Heating And Air Conditioning:
HVAC system components, blower motor, heater core, and refrigerant (if applicable).
Maintenance:
Oil changes, filter replacements, fluid checks, lubrication, belt adjustments, and tune-ups.
Repair:
Step-by-step instructions for common and complex repairs on all major systems.
Troubleshooting:
Diagnostic procedures, common fault identification, and corrective actions.
Disassembly And Assembly:
Detailed procedures for removing and reinstalling components, with exploded views.
Special Tools:
Identification of specific tools required for certain repair procedures.
Depth:
Professional Quality, highly detailed, covering all service and repair jobs.
Target Audience:
Professional Mechanics and DIY enthusiasts.
Engine Code Typical:
A10 (1.0L)
Engine Displacement:
988 cc (1.0 Liter)
Engine Configuration:
Inline 4-cylinder, OHV (Overhead Valve)
Horsepower Typical:
Approx. 62-65 PS (46-48 kW) at 6,000 rpm
Torque Typical:
Approx. 8.1-8.4 kg⋅m (80-82 N⋅m) at 3,600 rpm
Fuel Delivery:
Single barrel downdraft carburetor (e.g., Hitachi/Aisan)
Fuel Type:
Unleaded gasoline (octane rating appropriate for the era, likely 87 AKI / 91 RON)
Cooling Medium:
Water-cooled
Body Styles:
2-door Sedan, 4-door Sedan, 2-door Van (Wagon), 2-door Coupe
Wheelbase:
Approx. 2,310 mm (90.9 in)
Length:
Approx. 3,970 mm (156.3 in)
Width:
Approx. 1,500 mm (59.1 in)
Height:
Approx. 1,365 mm (53.7 in) for Sedan
Curb Weight Min:
Approx. 720 kg (1,587 lbs) for 2-door sedan
Gross Vehicle Weight:
Varies by body style and configuration (specific figures not provided in product info)
Engine Oil Change:
Typically every 5,000 km (3,000 miles) or 6 months, whichever comes first (refer to manual for exact specification).
Air Filter Replacement:
Recommended at 10,000-15,000 km (6,000-9,000 miles) or as needed based on driving conditions.
Spark Plug Replacement:
Typically every 20,000-30,000 km (12,000-18,000 miles).
Engine Oil Type:
API SE/SF or equivalent, SAE 10W-30 or 10W-40 (verify viscosity based on ambient temperature, refer to manual).
Transmission Fluid:
GL-4 gear oil, SAE 80W-90 (for manual transmission).
Coolant:
Ethylene glycol-based antifreeze mixed with distilled water (50/50 ratio).
Brake Fluid:
DOT 3 or DOT 4 hydraulic brake fluid.
Rust And Corrosion:
Common for vehicles of this era, especially in areas with road salt. Manual would cover body repair and rust prevention.
Carburetor Issues:
Clogging, wear, and adjustment issues due to age and fuel quality. Manual provides detailed rebuilding and tuning procedures.
Ignition System Aging:
Wear in distributor points, condenser, and coil. Manual covers testing and replacement.
