Engine Systems:
Detailed diagnostics, repair, and overhaul procedures for engine components, including cylinder head, pistons, connecting rods, crankshaft, camshaft, valve train, and timing.
Fuel System Coverage:
Complete information on fuel injection systems, fuel pumps, filters, injectors, and troubleshooting of fuel delivery issues.
Cooling System Coverage:
Radiator, water pump, thermostat, fan, coolant flow, and leak detection and repair procedures.
Lubrication System Coverage:
Oil pump, oil filter, oil passages, lubrication schedules, and maintenance for optimal engine longevity.
Electrical System Coverage:
Starter motor, alternator, battery, wiring diagrams, lighting systems, diagnostic trouble codes (DTCs), and component testing.
Transmission Coverage:
Repair and overhaul procedures for the main gearbox, including gear sets, synchronizers, shift forks, and clutch engagement mechanisms.
Hydraulic System Coverage:
Hydraulic pump, control valves, cylinders, hoses, filters, reservoir, and troubleshooting of lift and auxiliary hydraulic functions.
Pto Coverage:
Service and repair for the Power Take-Off (PTO) system, including engagement, disengagement, and maintenance of the PTO clutch and shaft.
Brake System Coverage:
Maintenance, adjustment, and repair of the braking system, including brake discs, calipers, master cylinder, and hydraulic lines.
Steering System Coverage:
Service and repair for the steering mechanism, including steering linkages, power steering pump, and hydraulic components.
Front Axle And Steering Coverage:
Service and repair for the front axle, kingpins, steering knuckles, tie rods, and steering box or hydraulic steering unit.
Wheel Alignment Specifications:
Includes specifications for front wheel alignment (toe-in) to ensure proper steering and tire wear.
Chassis And Body Coverage:
Information on frame inspection, fender repairs, operator platform maintenance, and mounting of external components.
Operator Station Coverage:
Details on the seat, controls, dashboard instrumentation, and any associated trim or safety components.
Maintenance Procedures:
Scheduled maintenance tasks, fluid level checks, filter replacements, lubrication, and general upkeep.
Diagnostic Procedures:
Systematic troubleshooting guides for identifying and resolving common and complex mechanical and electrical issues.
Repair Procedures:
Step-by-step instructions for disassembling, repairing, and reassembling all major components and systems.
Overhaul Procedures:
Comprehensive rebuild instructions for engines, transmissions, hydraulic pumps, and other major assemblies.
Troubleshooting Procedures:
Includes systematic troubleshooting flowcharts and diagnostic steps for various system malfunctions.
Technical Depth:
In-depth technical information suitable for professional mechanics and experienced DIY users, covering everything from routine maintenance to major overhauls and diagnostics.
Manual Completeness:
Comprehensive service and repair manual covering the entire Deutz Allis 6260 Tractor.
Engine Configuration:
Typically a 3 or 4-cylinder naturally aspirated diesel engine.
Bore Stroke:
Specific bore and stroke dimensions for the engine model will be detailed in the manual, crucial for engine rebuilds.
Compression Ratio:
Engine compression ratio will be specified for diagnostic purposes.
Engine Horsepower Net:
Approximately 60-70 HP (varies by specific engine variant and configuration).
Engine Torque Peak:
Specific torque figures would be listed in the manual, typically in the range of 150-200 lb-ft (203-271 Nm) depending on the exact engine variant.
Fuel System Type:
Direct Injection Diesel
Engine Oil Type:
API CD or CE classification, SAE 15W-40 (refer to manual for exact specifications).
Coolant Type:
Ethylene glycol-based permanent antifreeze with corrosion inhibitors, typically a 50/50 mix with distilled water.
Overall Length:
Approx. 140-150 inches (355-381 cm) (varies by configuration, e.g., with/without 3-point hitch).
Overall Width:
Approx. 70-80 inches (178-203 cm) (varies by tire size and axle width).
Wheelbase:
Approx. 85-90 inches (216-229 cm).
Ground Clearance:
Variable based on tire size and axle configuration; typically around 15-20 inches (38-51 cm) under the rear axle.
Operating Weight:
Approx. 5,000-6,000 lbs (2,268-2,722 kg) (unballasted).
Front Axle Weight:
Approx. 1,500-2,000 lbs (680-907 kg).
Rear Axle Weight:
Approx. 3,500-4,000 lbs (1,588-1,814 kg).
Max Allowable Weight:
The manual will specify the maximum gross vehicle weight, including any attached implements and ballast.
Engine Oil Filter Change:
Every 250 operating hours or annually, whichever comes first.
Engine Air Filter Cleaning Replacement:
Clean every 100 hours, replace every 500 hours or when damaged. More frequent cleaning in dusty conditions.
Fuel Filter Replacement:
Every 500 operating hours or annually.
Hydraulic Oil Filter Replacement:
Every 500 operating hours or annually.
Transmission Oil Change:
Every 1000 operating hours or every 2 years.
Hydraulic Fluid Capacity:
Approx. 12-15 gallons (45-57 liters) (for tractor hydraulics and transmission, depending on configuration).
Engine Oil Capacity:
Approx. 8-10 quarts (7.5-9.5 liters) with filter change.
Brake Fluid Type:
DOT 3 or DOT 4 hydraulic brake fluid (if applicable, for hydraulic brake systems).
Common Wear Items:
Clutch wear, hydraulic pump efficiency degradation over time, potential for starter or alternator issues, wear in PTO clutch components.
Electrical System Concerns:
Corrosion on electrical connectors, aging wiring harnesses, and potential issues with the voltage regulator or alternator.
