Engine Mechanical:
Engine disassembly, assembly, inspection, repair, timing, lubrication system, cooling system, fuel system (carburetor/injection), exhaust system.
Engine Electrical:
Ignition system, starting system, charging system, fuel injection system (EFI), engine control module (ECM) diagnostics, sensors, wiring diagrams.
Transmission Manual:
Manual transmission removal, disassembly, assembly, repair, clutch system.
Transmission Automatic:
Automatic transmission removal, disassembly, assembly, repair, diagnostics, hydraulic system, torque converter.
Drivetrain:
Four-wheel drive (4WD) system (if applicable), transfer case, drive shafts, U-joints, axles, differentials, hub assemblies.
Suspension:
Front suspension (independent), rear suspension (leaf springs), shocks, struts, springs, control arms, ball joints, bushings, steering linkage.
Steering:
Power steering system, steering column, steering gear/rack, tie rods, power steering pump, hoses, fluid.
Brakes:
Front disc brakes, rear drum/disc brakes, hydraulic system, master cylinder, power booster, brake lines, calipers, wheel cylinders, parking brake system, ABS diagnostics.
Electrical Chassis:
Lighting system (headlights, taillights, interior), wiper system, horn, power windows, power locks, mirrors, seats, accessories, body control module (BCM) diagnostics.
HVAC:
Heating, Ventilation, and Air Conditioning (HVAC) system, refrigerant, compressor, condenser, evaporator, blower motor, controls, ducting.
Body:
Body panel removal/installation, doors, hood, tailgate, bumpers, interior trim, glass, weatherstripping, structural components.
Diagnostics:
Troubleshooting charts, diagnostic trouble codes (DTCs), common symptoms and their causes, electrical system diagnostics.
Maintenance:
Scheduled maintenance, oil changes, filter replacements, fluid checks and changes, tune-ups, spark plug replacement, belt replacement.
Disassembly Assembly:
Detailed step-by-step instructions for removing and installing components and sub-assemblies.
Repair:
Component repair procedures, including internal component refurbishment and replacement.
Troubleshooting:
Systematic approach to diagnosing and resolving problems, with flowcharts and symptom-based solutions.
Wiring Diagrams:
Comprehensive electrical wiring diagrams for all vehicle systems.
Specifications:
Critical torque values, tolerances, fluid capacities, electrical specifications, and measurement data.
Illustrations:
Detailed diagrams, exploded views, and photographs to clarify procedures.
Depth:
Factory-level diagnostic and repair procedures suitable for professional technicians, with sufficient detail for experienced DIY mechanics.
Oil Change Interval:
Every 5,000-7,500 miles or 6 months, whichever comes first (refer to manual for specific engine)
Tire Rotation:
Every 7,500 miles
Transmission Fluid Change:
Approximately every 30,000-60,000 miles (depending on driving conditions and transmission type)
Engine Oil Spec:
Refer to manual for specific viscosity (e.g., SAE 5W-30 or 10W-30), API certified oil
Coolant Spec:
Chrysler 5/100 or equivalent HOAT coolant
Power Steering Fluid Spec:
Chrysler Power Steering Fluid or equivalent
Common Issues:
Rear axle seal leaks, front suspension wear (ball joints, tie rods), ABS sensor failures, transmission solenoid issues (automatic), occasional PCM/ECM electrical gremlins.
