Engine Mechanical:
        
        
            Detailed disassembly, assembly, inspection, and repair of all engine components for all available engines.
        
     
    
        
            Engine Electrical:
        
        
            Complete wiring diagrams, diagnostic procedures for engine control module (ECM), sensors, actuators, and ignition system.
        
     
    
        
            Fuel System:
        
        
            Diagnosis and repair of fuel injectors, fuel pump, fuel pressure regulator, evaporative emission control (EVAP) system.
        
     
    
        
            Cooling System:
        
        
            Thermostat, water pump, radiator, cooling fan diagnosis and replacement procedures.
        
     
    
        
            Exhaust System:
        
        
            Catalytic converter, muffler, exhaust manifold diagnosis and replacement.
        
     
    
        
            Transmission Mechanical:
        
        
            Detailed repair and overhaul procedures for automatic transmissions, including torque converter.
        
     
    
        
            Transmission Electronic:
        
        
            Transmission control module (TCM) diagnostics, shift solenoid testing, and transmission fluid pressure tests.
        
     
    
        
            Drivetrain And Axles:
        
        
            Front and rear axle, driveshaft, CV joints, differential service and repair.
        
     
    
        
            Suspension System:
        
        
            Front and rear suspension components (struts, shocks, control arms, ball joints, bushings), alignment specifications.
        
     
    
        
            Steering System:
        
        
            Power steering system diagnosis and repair, steering column, tie rods, and steering gear.
        
     
    
        
            Brake System:
        
        
            Front and rear brake pads, rotors, calipers, hydraulic system, ABS system diagnosis and repair.
        
     
    
        
            Wheel And Tire:
        
        
            Tire pressure monitoring system (TPMS) diagnosis, wheel bearing replacement, wheel torque specifications.
        
     
    
        
            Body And Frame:
        
        
            Body panel removal and installation, structural repairs, door and window mechanisms.
        
     
    
        
            Interior Trim:
        
        
            Dashboard, door panels, seat removal and installation.
        
     
    
        
            HVAC System:
        
        
            Air conditioning (A/C) system diagnosis, refrigerant handling, climate control module, heater core, blower motor.
        
     
    
        
            Electrical System General:
        
        
            Power distribution, battery, alternator, starter motor, lighting systems, interior/exterior electrical components.
        
     
    
        
            Body Control Module Bcm:
        
        
            Diagnosis and programming of the BCM and its associated functions (e.g., power locks, windows, interior lighting).
        
     
    
        
            Infotainment System:
        
        
            Radio, navigation system, speaker diagnostics and replacement (where applicable).
        
     
    
        
            Safety Systems:
        
        
            Airbag system diagnosis and replacement, seat belt mechanisms.
        
     
    
    
        
            Preventive Maintenance:
        
        
            Detailed schedules and procedures for oil changes, filter replacements, fluid checks, and belt inspections.
        
     
    
        
            Troubleshooting Guides:
        
        
            Systematic diagnostic flowcharts and symptom-based troubleshooting for common and complex issues.
        
     
    
        
            Repair And Rebuild:
        
        
            Step-by-step instructions for component removal, installation, and complete overhaul of major systems.
        
     
    
        
            Diagnostic Procedures:
        
        
            Specific procedures for using diagnostic scan tools, reading fault codes, and interpreting sensor data.
        
     
    
        
            Specifications And Tolerances:
        
        
            Torque values, clearances, fluid capacities, and critical measurements for all major components.
        
     
    
        
            Wiring Diagrams:
        
        
            Comprehensive, high-quality wiring schematics for all vehicle electrical systems.
        
     
    
        
            Tightening Sequences:
        
        
            Correct bolt tightening sequences for critical components like cylinder heads, intake manifolds, and wheel hubs.
        
     
    
        
            Special Tool Identification:
        
        
            Identification and usage instructions for specialized tools required for specific repairs.
        
     
    
    
        
            Depth Level:
        
        
            Comprehensive (covering from basic maintenance to full engine/transmission rebuilds).
        
     
    
        
            Diagnostic Capability:
        
        
            Advanced diagnostic procedures including oscilloscope usage and sensor data interpretation.
        
     
    
        
            Repair Complexity:
        
        
            Suitable for professional technicians and experienced DIY mechanics.
        
     
 
    
    
    
        
            Oil Change Interval:
        
        
            Every 6,000 miles (9,600 km) or 6 months, whichever comes first (under normal driving conditions).
        
     
    
        
            Engine Air Filter:
        
        
            Replace every 30,000 miles (48,000 km) or as needed based on inspection.
        
     
    
        
            Cabin Air Filter:
        
        
            Replace every 15,000 miles (24,000 km) or 12 months.
        
     
    
        
            Spark Plug Replacement 2.7L/3.5L:
        
        
            Replace at 100,000 miles (160,000 km) with Champion copper or equivalent.
        
     
    
        
            Spark Plug Replacement 5.7L Hemi:
        
        
            Replace at 100,000 miles (160,000 km) with Champion copper or equivalent.
        
     
    
    
        
            Engine Oil 2.7L/3.5L:
        
        
            SAE 5W-20, API SP or newer (Chrysler MS-6395 compliant).
        
     
    
        
            Engine Oil 5.7L Hemi:
        
        
            SAE 5W-20, API SP or newer (Chrysler MS-6395 compliant). Consider SAE 5W-30 for extreme heat or heavy towing.
        
     
    
        
            Coolant Type:
        
        
            Mopar HOAT (Hybrid Organic Acid Technology) Antifreeze/Coolant, Orange (MS-9769).
        
     
    
        
            Power Steering Fluid:
        
        
            Mopar Power Steering Fluid (MS-5901 compliant) or equivalent Dexron III/Mercon.
        
     
    
    
        
            Common Issues:
        
        
            Early models may experience issues with ball joints, control arm bushings, and water pump leaks. Some owners report accessory drive belt pulley issues. The 5.7L HEMI's Multi-Displacement System (MDS) can sometimes cause issues if not maintained properly.