Segment:
Affordable sport compact coupe
Competitors:
Mazda MX-5 Miata, Toyota Celica, Mitsubishi Eclipse, Honda Civic Coupe, Nissan Sentra SE-R
Appeal:
Styling, affordability, accessible performance
Target Audience:
Younger drivers, enthusiasts seeking a sporty yet budget-friendly vehicle
Engine:
All engine types, fuel injection, ignition, cooling, lubrication, exhaust, emissions control, engine mechanical, timing, performance tuning
Transmission:
Manual and Automatic transmission systems, clutch, driveshafts, differentials, gear ratios, fluid maintenance, repair procedures
Brakes:
Hydraulic system, ABS (Anti-lock Braking System), brake components (discs, pads, calipers, master cylinder, lines), parking brake, bleeding procedures
Steering:
Power steering system, steering column, rack and pinion, tie rods, alignment specifications
Suspension:
Front and rear suspension components (struts, springs, control arms, bushings), wheel bearings, alignment
Electrical:
Wiring diagrams, battery, charging system, starting system, lighting, fuses, relays, sensors, ECUs, body control modules, diagnostics
Body:
Body panels, doors, windows, interior trim, seats, body repair, rust prevention, structural components
HVAC:
Heating, Ventilation, and Air Conditioning system, refrigerant, controls, components
Safety Systems:
Airbags, seatbelts, safety restraint systems
Maintenance:
Oil changes, fluid checks and replacement, filter replacements, tire rotations, brake inspections, tune-ups
Diagnostics:
Troubleshooting guides, symptom-based diagnostics, fault code interpretation (where applicable), systematic problem diagnosis
Repair:
Step-by-step repair procedures for all major mechanical, electrical, and body systems
Component Replacement:
Detailed instructions for replacing individual parts and assemblies
Rebuilds:
Procedures for rebuilding major components like engines and transmissions
Depth:
Comprehensive (from basic maintenance to in-depth repairs and diagnostics)
Level Of Detail:
Factory trained technician level
Illustrations:
Hundreds of detailed illustrations and diagrams
Searchability:
Searchable text for quick access to information
Printability:
Printable pages for on-the-go use
Engine 1 Code:
G4CP (Beta I)
Engine 1 Type:
2.0L DOHC Inline-4
Engine 1 Displacement Cc:
1997
Engine 1 Bore X Stroke Mm:
85.0 x 88.0
Engine 1 Compression Ratio:
9.5:1
Engine 1 Horsepower Hp:
134-140 (depending on market and specific calibration)
Engine 1 Torque Lb-Ft:
133-137 (depending on market and specific calibration)
Engine 2 Code:
G6BA (Beta II)
Engine 2 Type:
2.7L DOHC V6
Engine 2 Displacement Cc:
2656
Engine 2 Bore X Stroke Mm:
86.7 x 75.0
Engine 2 Compression Ratio:
9.4:1
Engine 2 Horsepower Hp:
170-175 (depending on market and specific calibration)
Engine 2 Torque Lb-Ft:
176-181 (depending on market and specific calibration)
Fuel Type:
Unleaded Gasoline (87 octane minimum recommended, higher for optimal performance)
Induction:
Electronic Fuel Injection (MPI - Multi-Point Injection)
ECU:
ECU (Engine Control Unit) with integrated diagnostics
NHTSA Front Impact Driver:
Not rated or insufficient data.
NHTSA Front Impact Passenger:
Not rated or insufficient data.
IIHS Frontal Offset:
Marginal ('Acceptable' in older ratings) for some years/configurations.
ABS:
Optional on some models, standard on others (check trim level).
Airbags:
Driver and passenger front airbags standard.
Seatbelts:
3-point front and rear seatbelts with pretensioners and load limiters for front occupants.
Oil Change Interval:
Every 7,500 miles or 6 months, whichever comes first. Refer to manual for severe driving conditions.
Engine Coolant Flush Interval:
Every 30,000 miles or 2 years. Use Hyundai specified coolant.
Timing Belt Replacement Interval:
For the 2.0L engine (G4CP), the timing belt replacement interval is typically 60,000 miles or 4 years. For the 2.7L V6 (G6BA), it is also typically 60,000 miles or 4 years. **Crucially, this is an interference engine, and belt failure will result in severe engine damage.** Consult the manual for precise intervals and procedures.
Engine Oil Viscosity:
API SG or higher; SAE 5W-30 recommended for most conditions. Check manual for specific temperature ranges.
Engine Oil Capacity Liters 2.0L:
Approximately 4.0
Engine Oil Capacity Liters 2.7L:
Approximately 4.5
Engine Mounts:
Premature wear or failure of engine mounts can lead to increased vibration and noise.
Cv Axles:
Wear in CV joints can result in clicking noises during turns.
Rear Wheel Bearings:
Can develop noise or play over time.
Door Lock Actuators:
Failure of door lock actuators leading to inoperable central locking.
Accessory Belt Tensioner:
Can seize or fail, leading to noise or loss of accessory function.