Positioning:
A robust and reliable utility tractor for agricultural and industrial applications
Competitors:
Massey Ferguson 35, Fordson Dexta, David Brown 30 series, Leyland 154
Features:
Versatile, durable, fuel-efficient diesel engine, robust transmission, capable of various PTO-driven implements
Engine Service:
Engine overhaul, disassembly, assembly, tuning, diagnostics, fuel system, lubrication system, cooling system
Transmission Service:
Clutch, gearbox, differential, PTO (Power Take-Off), hydraulic lift system maintenance and repair
Electrical System:
Wiring diagrams, starter, generator/alternator, battery, lighting, ignition system
Chassis And Frame:
Front axle, rear axle, steering system, braking system, wheels and tires
Body And Controls:
Operator controls, seat, fenders, instrumentation
General Maintenance:
Lubrication charts, filter changes, fluid checks, belt adjustments
Troubleshooting:
Fault diagnosis, symptom-based troubleshooting guides
Repair Procedures:
Step-by-step instructions for component disassembly, repair, and reassembly
Technical Specifications:
Torque values, clearances, tolerances, specifications for all components
Depth:
Comprehensive factory-level repair information, suitable for professional mechanics and experienced DIY users
Format:
Portable Document Format (PDF)
Quality:
Printable quality, allowing for full documentation printing
Binding:
Not applicable (Digital PDF Download)
Paper:
Not applicable (Digital PDF Download)
Engine Model:
BC144 (Diesel)
Engine Type:
4-cylinder, direct injection, diesel
Horsepower Drawbar:
Approximately 40 HP (Drawbar)
Horsepower Pto:
Approximately 46 HP (PTO)
Bore X Stroke:
Approximately 3.5" x 4.33" (88.9mm x 110mm)
Displacement:
Approximately 165 cubic inches (2.7 Liters)
Injection System:
Bosch or Simms (depending on build date) direct injection
Fuel Filter:
Cartridge type, see manual for specific part numbers and replacement intervals
Oil Capacity:
Approximately 6 quarts (5.7 Liters), check manual for exact capacity and type
Oil Type:
API CD or higher (e.g., SAE 30 or 15W-40 diesel engine oil), consult manual for precise specification and ambient temperature recommendations
Cooling Type:
Water cooled
Coolant Capacity:
Approximately 14 quarts (13.2 Liters), check manual for exact capacity and coolant mixture
Transmission Type:
Constant mesh, sliding gear transmission
Number Of Gears Forward:
8 Forward
Number Of Gears Reverse:
2 Reverse
Clutch Type:
Single dry plate, heavy-duty
Pto Options:
Standard 540 RPM PTO, optional 540/1000 RPM PTO
Hydraulic System:
Category I or II 3-point hitch with draft control and position control, International Harvester's Traction-Booster system (optional or standard depending on variant)
Transmission Oil Capacity:
Approximately 30 quarts (28.4 Liters), check manual for exact capacity and type
Transmission Oil Type:
API GL-4 rated gear oil (e.g., 80W-90 or 85W-140 depending on temperature), consult manual for precise specification and IH specifications
Wheelbase:
Approximately 72 inches (1829 mm)
Length:
Approximately 120 inches (3048 mm) without implement
Width:
Adjustable, typically 60-72 inches (1524-1829 mm) track width
Operating Weight:
Approximately 3500 - 4000 lbs (1588 - 1814 kg) depending on configuration
Front Tire Size:
Typically 6.00 x 16
Rear Tire Size:
Typically 12.4 x 28
Wheel Bolt Pattern:
Varies by wheel type, consult manual for specifics
Rollover Protection:
ROPS (Roll-Over Protective Structure) was an option, not standard. Manual will detail installation or inspection if present.
Braking System:
Inboard mechanical drum brakes, independent or coordinated pedal operation
Operator Station:
Open operator station, with potential for seat belts if factory-equipped or retrofitted.
Infotainment System:
None. Basic instrumentation (ammeter, oil pressure gauge, temperature gauge, tachometer/hour meter).
Driver Assistance Features:
None. Focus on mechanical controls and PTO operation.
Connectivity Options:
None.
Engine Oil Change:
Typically every 100-250 operating hours, or annually. Specific interval in manual.
Fuel Filter Replacement:
Regular replacement recommended, typically every 250-500 hours or as needed. Specific interval in manual.
Transmission Oil Change:
First change at 50-100 hours, then every 500-1000 hours. Specific interval in manual.
Hydraulic Oil Change:
Typically annually or every 500 hours. Specific interval in manual.
Power Steering Fluid:
If applicable (power steering was an option), consult manual for type.
Brake Fluid:
Not typically applicable to mechanical drum brakes; check manual if hydraulic assist is present.
Common Wear Items:
Clutch wear, hydraulic pump seals, starter motor, exhaust system, and potential for rust on body panels.
Engine Reliability:
Generally robust, but like any older diesel, can suffer from injector issues, glow plug problems, or fuel system blockages if not maintained.
Transmission Issues:
Wear in gear synchros or bearings, PTO engagement issues, and hydraulic lift system leaks can occur.
Brand Legacy:
International Harvester (IH) has a long and storied history in agricultural machinery, known for ruggedness and innovation.
Predecessors:
Part of the 'B' series line, evolving from earlier McCormick-Deering and Farmall designs.
Successors:
Evolved into the later International Harvester 400 series tractors.
Production Years:
Approximately 1963 - 1967
Manufacturing Locations:
United Kingdom (by International Harvester Company of Great Britain Limited) and potentially other IH facilities.
