Vehicle Class:
Hyperbike / Sport Touring Motorcycle
Target Audience:
Enthusiast owners, independent motorcycle mechanics, and performance-oriented riders seeking in-depth knowledge for maintenance and repair.
Manual Value Proposition:
Offers comprehensive, model-specific factory-level repair information, exceeding the scope of generic online forums or simplified guides.
Coverage Breadth:
Covers virtually every aspect of the motorcycle's operation, from basic fluid checks to complete engine rebuilds.
Visual Guidance:
Extensive use of diagrams and illustrations facilitates understanding of complex procedures.
Accessibility:
Instant download format provides immediate access to critical repair information.
General Information:
Included
Inspection And Adjustment:
Included
Engine Mechanical:
Included (Removal/Installation, Cylinder Head/Valve, Cylinder/Piston, Crankcase, Crankshaft/Primary Shaft)
Drivetrain Transmission:
Included (Clutch, Gearshift Linkage, Sub Transmission, Transmission)
Suspension:
Included (Front Wheel/Suspension, Rear Wheel/Suspension)
Brakes:
Included (Hydraulic Brake)
Electrical System:
Included (Battery/Charging System, Ignition System, Electric Starter, Switches)
Diagnostics Troubleshooting:
Included
Technical Features:
Included
Wiring Diagrams:
Included
Estimated Page Count:
Likely over 500 pages (typical for comprehensive service manuals of this caliber)
Manual Classification:
Factory Service Manual / Workshop Manual
Viewing Features:
Zoom In/Out Enabled
Delivery Type:
Instant Download
Engine Systems:
Complete internal and external engine components, including cooling, lubrication, fuel delivery, ignition, and starting systems.
Transmission Drivetrain:
Detailed coverage of the clutch assembly, gearbox internals, shift mechanisms, and final drive.
Chassis Suspension:
In-depth information on front forks (including hydraulic adjustments), rear shock absorber, swingarm, and wheel bearing service.
Braking System:
Comprehensive coverage of hydraulic front and rear brake systems, including caliper service, master cylinder overhaul, and fluid replacement procedures.
Electrical Charging Ignition:
Detailed diagrams and service procedures for the charging system (stator, regulator/rectifier), ignition system (ECU, ignition coils, spark plugs), and starter motor.
Fuel Induction:
Explains fuel injection system components, sensors, and diagnostic procedures.
Control Systems:
Coverage of switches, relays, and basic control unit functions.
Routine Maintenance:
Oil changes, filter replacements, chain adjustment, brake pad inspection, fluid level checks, spark plug replacement, and general inspection points.
Disassembly Reassembly:
Step-by-step instructions for removing and installing major components like the engine, wheels, suspension, and body panels.
Engine Overhaul:
Complete engine rebuilding procedures, including valve adjustments, piston and ring replacement, crankshaft and bearing service, and cylinder head work.
Transmission Service:
Detailed instructions for clutch inspection, repair, and replacement, as well as transmission gear and bearing service.
Suspension Tuning:
Guidance on front fork oil changes, seal replacement, and rear shock adjustment procedures.
Brake System Repair:
Procedures for bleeding brakes, replacing brake pads, servicing calipers and master cylinders.
Electrical Troubleshooting:
Diagnostic trees and wiring diagrams to pinpoint electrical faults in charging, ignition, starting, and lighting systems.
Wheel Tire Service:
Instructions for wheel removal, tire mounting/balancing, and bearing maintenance.
Diagnostic Capabilities:
Advanced diagnostic procedures, including checking sensor outputs, actuator functionality, and potential ECU issues.
Torque Specifications:
Detailed torque values for all critical fasteners across all systems.
Clearances Tolerances:
Precise measurements for valve clearances, bearing tolerances, and other critical engine and chassis specifications.
Troubleshooting Guides:
Systematic troubleshooting charts and guidance for identifying and resolving common and uncommon issues.
Diagrams Illustrations:
Step-by-step diagrams and high-quality illustrations for all procedures, enhancing clarity and accuracy.
Engine Type:
Liquid-cooled, 4-stroke, DOHC, 4-valve per cylinder, Inline-four
Bore X Stroke:
84.0 x 61.0 mm
Compression Ratio:
12.0:1 (typical for early models, may vary slightly)
Horsepower:
Estimated 170-180+ HP at the crank (stock, actual figures vary by year and specific model variant)
Torque:
Estimated 100-110+ lb-ft at the crank (stock, actual figures vary by year and specific model variant)
Fuel Delivery:
Fuel Injection with sub-throttle valves
Fuel Type:
Unleaded gasoline (91 octane or higher recommended)
Oil Type Capacity:
Refer to manual for specific grade (e.g., SAE 10W-40) and capacity, typically around 4.0-4.2 liters with filter change.
Oil Filter Change Interval:
Recommended every 6,000-10,000 km or annually, whichever comes first (refer to manual for exact interval).
Air Filter Cleaning Replacement:
Recommended every 12,000-18,000 km (check and clean more frequently in dusty conditions).
Spark Plug Replacement Interval:
Typically around 18,000-24,000 km, dependent on spark plug type (refer to manual).
Valve Clearance Check:
Recommended every 24,000-36,000 km (critical for performance and engine longevity).
Engine Oil Grade:
Refer to manual, typically SAE 10W-40 API SG or higher.
Coolant Type:
Mixture of antifreeze and distilled water (50/50 recommended) for specific freeze protection and corrosion inhibition. Refer to manual for specific type.
Brake Fluid Type:
DOT 4 hydraulic brake fluid (or higher specification as recommended).
Fork Oil Grade:
Refer to manual for specific viscosity grade (e.g., 10W) and type.
Common Wear Items:
Clutch plates, brake pads, tires, fork seals, and chain/sprockets are typical wear items requiring periodic inspection and replacement.
Potential Issues Early Models:
Some early models may have had minor ECU mapping or accessory fitment considerations, best addressed by referring to service bulletins or this manual.
