|
Manual Coverage
|
|
Systems Covered
|
|
Engine Service Repair:
|
Yes (including maintenance, diagnostics, and repair)
|
|
Transmission Service Repair:
|
Yes (covering all styles and gears)
|
|
Brake System:
|
Yes (diagnostics, repair, and maintenance)
|
|
Wiring Diagrams:
|
Yes (detailed electrical system diagrams)
|
|
Electrical System:
|
Yes (comprehensive coverage and troubleshooting)
|
|
Suspension:
|
Yes (repair and maintenance procedures)
|
|
Steering System:
|
Yes (diagnostics and repair)
|
|
Cooling System:
|
Yes (maintenance and repair)
|
|
Fuel Injection Fuel System:
|
Yes (including diagnostics and repair)
|
|
Emission System:
|
Yes (including troubleshooting and repair)
|
|
HVAC Heater Air Conditioning:
|
Yes (maintenance and repair)
|
|
Engine Control System:
|
Yes (diagnostics and troubleshooting)
|
|
Chassis Body:
|
Yes (including structural repair and adjustments)
|
|
Restraint System Airbags:
|
Yes (including SRS system diagnostics)
|
|
Interior:
|
Yes (including trim removal and installation)
|
|
Differential Drive Axle:
|
Yes (maintenance and repair)
|
|
Procedures Included
|
|
General Maintenance:
|
Yes (routine checks and servicing)
|
|
Troubleshooting:
|
Yes (advanced diagnostic guides)
|
|
Periodic Lubrication:
|
Yes (specific lubrication points and schedules)
|
|
Technical Depth
|
|
Depth Of Coverage:
|
Complete factory-level repair and maintenance, suitable for professional technicians and DIY enthusiasts.
|
|
Procedure Format:
|
Step-by-step instructions with detailed substeps, notes, cautions, and warnings.
|
|
Illustration Quality:
|
Includes detailed illustrations, drawings, photos, and enlarged insets for clarity.
|
|
Engine Specifications
|
|
Primary Engine
|
|
Engine Options 2014 2015:
|
Typically offered with 1.6L Gamma MPI, 1.8L Nu MPI, and 2.0L Nu MPI GDI engines globally. Specific engines vary by market and trim.
|
|
Performance
|
|
Power Output Range:
|
Approx. 130-164 hp (97-122 kW), depending on engine and market.
|
|
Torque Output Range:
|
Approx. 119-156 lb-ft (161-211 Nm), depending on engine and market.
|
|
Fuel System
|
|
Fuel Delivery:
|
Multi-Port Fuel Injection (MPI) or Gasoline Direct Injection (GDI) depending on engine. Manual covers detailed fuel system diagnostics.
|
|
Engine Codes
|
|
Common Engine Codes:
|
G4FC (1.6L Gamma), G4NB (1.8L Nu MPI), G4NA (2.0L Nu MPI), G4ND (2.0L Nu GDI) - specific codes may vary by region.
|
|
Dimensions
|
|
Exterior
|
|
Overall Length:
|
Approx. 4,560 mm (179.5 in)
|
|
Overall Width:
|
Approx. 1,780 mm (70.1 in)
|
|
Overall Height:
|
Approx. 1,415 mm (55.7 in)
|
|
Wheelbase:
|
Approx. 2,700 mm (106.3 in)
|
|
Weights
|
|
Curb Weight Range:
|
Approx. 1,250 - 1,350 kg (2,756 - 2,976 lbs), depending on configuration.
|
|
Gross Vehicle Weight Rating:
|
Specified in manual, varies by model and equipment.
|
|
Safety Features
|
|
Ratings
|
|
IIHS Top Safety Pick:
|
The third-generation Cerato (YD) achieved 'Top Safety Pick' ratings from the IIHS in some configurations and model years, depending on specific equipment and testing.
|
|
Active Features
|
|
Active Safety Features Typical:
|
Anti-lock Braking System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BAS), Traction Control System (TCS), Electronic Stability Control (ESC).
|
|
Passive Features
|
|
Passive Safety Features Typical:
|
Front airbags, front side-impact airbags, full-length side curtain airbags. Seatbelt pretensioners and load limiters.
|
|
Maintenance
|
|
Service Intervals
|
|
Oil Change Interval:
|
Typically every 7,500 miles (12,000 km) or 12 months, whichever comes first, using synthetic oil (consult manual for specific oil type and viscosity).
|
|
Air Filter Replacement Interval:
|
Typically every 30,000 miles (48,000 km) or as needed based on driving conditions.
|
|
Cabin Air Filter Replacement Interval:
|
Typically every 15,000 miles (24,000 km) or 12 months.
|
|
Spark Plug Replacement Interval:
|
Varies by engine type; Iridium spark plugs typically at 60,000 - 100,000 miles (96,000 - 160,000 km).
|
|
Fluid Specifications
|
|
Engine Oil Specification:
|
API SN or higher, ILSAC GF-5 or higher. Viscosity typically SAE 0W-20 or 5W-20 depending on ambient temperature and engine. Manual specifies exact grade.
|
|
Coolant Specification:
|
Ethylene glycol-based coolant with a 50/50 mix of antifreeze and distilled water. Genuine Kia Super Long Life Coolant (PS) or equivalent is recommended.
|
|
Brake Fluid Specification:
|
DOT 3 or DOT 4 brake fluid. Manual specifies recommended type and replacement intervals.
|
|
Transmission Fluid Specification:
|
For Automatic Transmission: Genuine Kia ATF SP-IV or equivalent. For Manual Transmission: GL-4 gear oil, SAE 75W/85 or 75W/90 (consult manual for exact specification).
|
|
Known Issues
|
|
Common Problems Potential:
|
Some owners have reported issues with engine knocking (especially GDI engines), potential transmission problems, and minor electrical gremlins. The manual addresses diagnosis and repair for these and other potential issues.
|
|
Vehicle History
|
|
Brand Heritage
|
|
Kia Heritage:
|
Kia Motors Corporation, established in 1944, has a long history in automotive manufacturing, known for providing value and increasingly sophisticated vehicles.
|
|
Model Evolution
|
|
Cerato Evolution:
|
The Kia Cerato, also known as the Forte in some markets, is a compact sedan/hatchback that has evolved through three generations, with the YD generation (2014-2015) representing a significant redesign with improved styling, features, and efficiency.
|
|
Production
|
|
Production Location:
|
Primarily manufactured in South Korea (Hwaseong) and also in other Kia plants globally depending on the market, such as Mexico.
|
