Engine Overhaul:
Complete disassembly, inspection, repair, and reassembly procedures for the engine.
Fuel System Repair:
Service and repair of fuel injection pump, injectors, fuel lines, and filters.
Cooling System Maintenance:
Radiator, thermostat, water pump, hoses, and coolant specifications.
Lubrication System:
Oil pump, oil filter, lubrication passages, and oil pressure checks.
Transmission Service:
Detailed procedures for the powershift transmission (if applicable) or gear transmission, including clutch, gears, and shifting mechanisms.
Hydraulic System Diagnostics:
Troubleshooting and repair of the main hydraulic pump, control valves, cylinders, and PTO (Power Take-Off) hydraulics.
Electrical System Troubleshooting:
Wiring diagrams, starter, alternator, battery system, lighting, and accessory circuits.
Braking System Repair:
Service for mechanical and hydraulic brake components, including adjustments and fluid replacement.
Steering System Overhaul:
Maintenance and repair of the steering column, linkages, and hydraulic steering components.
Front Axle And Drive Shaft:
Service and repair for 2WD and 4WD front axles, including hubs and differentials.
Rear Axle And Differential:
Reassembly and adjustment of the rear axle housing and differential unit.
Pto System Service:
Maintenance and repair of the independent and live PTO mechanisms.
Three Point Hitch Adjustment:
Service and calibration of the 3-point hitch system for implement control.
Operator Station Repair:
Service for the operator's platform, seat, controls, and dashboard.
Bodywork And Chassis:
Repair procedures for the tractor frame, fenders, and hood.
Routine Maintenance:
Regular service intervals, lubrication points, and fluid level checks.
Troubleshooting Guides:
Diagnostic procedures for common and uncommon issues across all systems.
Component Replacement:
Step-by-step instructions for replacing parts like alternators, starters, fuel pumps, etc.
Engine Rebuild:
Comprehensive instructions for complete engine overhauls, including bore honing, piston ring replacement, and bearing service.
Transmission Rebuild:
Detailed procedures for gearbox disassembly, component replacement (e.g., synchronizers, gears), and reassembly.
Hydraulic Pump Calibration:
Procedures for testing and adjusting hydraulic system pressure and flow rates.
Electrical Diagnostics:
Step-by-step troubleshooting for electrical faults using wiring diagrams and test procedures.
Torque Specifications:
Precise torque values for all critical fasteners during assembly and disassembly.
Special Tool Requirements:
Identification and usage of specialized tools required for specific repair procedures.
Depth Of Coverage:
Comprehensive workshop level, suitable for professional mechanics and advanced DIY users.
Diagnostic Capabilities:
Advanced diagnostic routines and troubleshooting trees for identifying root causes of malfunctions.
Rebuild Instructions:
Detailed instructions for complete component rebuilds, including transmissions, engines, and hydraulic units.
Engine Oil Change:
Every 200 operating hours or annually, whichever comes first.
Fuel Filter Replacement:
Every 400 operating hours or annually.
Air Filter Cleaning Replacement:
Check daily, clean every 50 hours, replace every 200 hours or as needed.
Transmission Hydraulic Fluid Change:
Every 600 operating hours or every 2 years.
Engine Oil Capacity:
Approx. 7.8 Liters (8.2 US Quarts)
Transmission Hydraulic Fluid Capacity:
Approx. 40 Liters (10.6 US Gallons)
Coolant Type:
Ethylene Glycol based antifreeze/coolant, 50/50 mix with distilled water.
Common Wear Items:
Clutch components, PTO clutch packs, hydraulic seals, and front axle pivot wear.
Electrical Gremlins:
Occasional issues with starter solenoids or wiring harness integrity over time.
Hydraulic Performance:
Slight degradation in hydraulic lift capacity or response with age and heavy use.
