|
Manual Details
|
|
Coverage Areas
|
|
Applicable Years:
|
1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989
|
|
Body Styles Covered:
|
Hatchback (3-door, 5-door), Sedan (4-door), Wagon (5-door), Coupe (2-door GT/GTS models)
|
|
Trim Levels Covered:
|
All major trims including DX, GL, LX, GT, GTS, S
|
|
Page Count
|
|
Estimated Page Count:
|
Over 500 pages (typical for comprehensive service manuals of this era)
|
|
Manual Type
|
|
Manual Type:
|
Service and Repair Manual
|
|
Language
|
|
Language:
|
English
|
|
Format
|
|
Format:
|
Digital (likely PDF, potentially scanned original)
|
|
Manual Coverage
|
|
Systems Covered
|
|
Powertrain Engine:
|
Detailed diagnosis, repair, overhaul, and specifications for all engine variants including 1.3L, 1.5L, 1.6L (carbureted and fuel-injected), and 1.8L (GT/GTS turbo models).
|
|
Powertrain Transmission:
|
Coverage for manual (4-speed, 5-speed) and automatic (3-speed, 4-speed) transmissions, including clutch, gearbox, torque converter, and final drive.
|
|
Chassis Suspension:
|
Front suspension (MacPherson strut, coil springs), rear suspension (independent multi-link, semi-independent beam axle), steering system, wheel alignment specifications.
|
|
Chassis Brakes:
|
Front disc brakes, rear drum brakes (or disc on some higher trims/models), hydraulic system, parking brake, bleeding procedures.
|
|
Electrical Engine Management:
|
Ignition system (points, electronic), fuel injection systems (e.g., KE-Jetronic, EGI), sensor diagnostics, ECU troubleshooting.
|
|
Electrical Lighting Accessories:
|
Headlights, taillights, interior lighting, power windows, mirrors, wipers, horn, fuse box diagrams, wiring schematics.
|
|
Body And Trim:
|
Body panel removal and installation, interior trim, door mechanisms, glass replacement, exterior trim, bumpers.
|
|
HVAC:
|
Heating, ventilation, and air conditioning system diagnosis and repair.
|
|
Procedures Included
|
|
Maintenance Tasks:
|
Oil changes, filter replacements, spark plug tuning, belt adjustments, fluid checks and top-ups, lubrication.
|
|
Repair Procedures:
|
Engine component replacement (alternator, starter, water pump, radiator), brake caliper/rotor replacement, exhaust system repair, suspension arm/bushings replacement.
|
|
Troubleshooting:
|
Diagnostic flowcharts for common drivability issues, electrical faults, and mechanical problems.
|
|
Rebuilding Overhauling:
|
Detailed steps for engine and transmission overhauls, including torque specifications, clearances, and assembly sequences.
|
|
Wiring Diagrams:
|
Comprehensive electrical wiring schematics for all major systems.
|
|
Technical Depth
|
|
Depth Of Coverage:
|
Comprehensive, covering routine maintenance, component-level repair, diagnostic procedures, and complete overhauls.
|
|
Diagnostic Tools Required:
|
Includes information for standard hand tools, specialized engine timing tools, multimeter for electrical diagnostics, and potentially early scan tools for fuel-injected models.
|
|
Engine Specifications
|
|
Primary Engine
|
|
Engine Code Common:
|
E1, E3, E5, B6 (e.g., E5T for 1.5L, B6S for 1.6L)
|
|
Engine Displacement
|
|
Engine Displacements Offered:
|
1.3L (1338 cc), 1.5L (1490 cc), 1.6L (1597 cc), 1.8L (1781 cc Turbocharged - GT/GTS/GTX)
|
|
Performance
|
|
Horsepower Range:
|
Approximately 60 hp (1.3L) to 130 hp (1.8L Turbocharged GTX/GTS).
|
|
Torque Range:
|
Approximately 70 lb-ft to 150 lb-ft depending on engine.
|
|
Fuel System
|
|
Fuel Delivery Early Models:
|
Carbureted (e.g., Hitachi, Keihin twin-choke)
|
|
Fuel Delivery Later Models:
|
Electronic Fuel Injection (EFI/EGI), multi-point or single-point.
|
|
Ignition System
|
|
Ignition Type:
|
Distributor-based, breaker-point ignition on very early models, transitioning to electronic ignition and distributorless ignition systems (DIS) on later, more advanced models.
|
|
Maintenance
|
|
Service Intervals
|
|
Oil Change Interval:
|
Typically every 3,000-5,000 miles (5,000-8,000 km) or 6 months, depending on driving conditions. Manual will provide precise recommendations.
|
|
Tune Up Interval:
|
Spark plugs, ignition timing, and filter checks usually around 30,000 miles (50,000 km).
|
|
Fluid Specifications
|
|
Engine Oil Type:
|
API SG or SH classification, SAE 10W-30 or 10W-40 common. Manual will specify based on temperature and engine.
|
|
Coolant Type:
|
Ethylene glycol based, typically a 50/50 mix with distilled water. Manual will confirm specific type and capacity.
|
|
Transmission Fluid Manual:
|
API GL-4, SAE 75W-90 or 80W-90 gear oil.
|
|
Transmission Fluid Automatic:
|
Dexron-II or equivalent ATF. Manual will specify capacity and type.
|
|
Brake Fluid Type:
|
DOT 3 or DOT 4, depending on the system. Manual will specify.
|
|
Known Issues
|
|
Common Wear Items:
|
Ignition components (cap, rotor, plugs, wires), fuel pumps (especially on EFI models), exhaust system corrosion, suspension bushings, clutch wear.
|
|
Potential Rust Areas:
|
Wheel arches, rocker panels, rear quarter panels, door bottoms (depending on climate and care).
|
|
Maintenance Schedule Overview
|
|
Major Service Points:
|
Timing belt replacement (if applicable to specific engine), fuel filter replacement, coolant flush, brake fluid flush.
|
|
Vehicle History
|
|
Brand Heritage
|
|
Mazda Philosophy Era:
|
Mazda was establishing itself as a manufacturer of reliable, well-engineered, and often sporty vehicles, moving beyond its early rotary engine focus for mainstream models.
|
|
Model Evolution
|
|
Bf Generation Significance:
|
This generation (1980-1989, also known as the third generation of the Familia) represented a significant leap in refinement, technology, and design for Mazda's compact offering. It also introduced more advanced engineering like independent rear suspension and turbocharging.
|
|
Production
|
|
Manufacturing Locations:
|
Primarily Japan (various Mazda plants), with some production or assembly in other countries for specific markets.
|
|
Production Years Covered:
|
1981-1989, covering the majority of the BF platform lifecycle.
|
