Engine Mechanical:
Full disassembly, assembly, component inspection, and rebuilding of the rotary engine (12A and 13B variations)
Cooling System:
Radiator, water pump, thermostat, coolant flow, hoses, and fan operation
Starting And Charging:
Battery, starter motor, alternator, wiring, and charging system diagnostics
Ignition System:
Spark plugs, ignition coils, distributor (if applicable), timing, and electronic ignition components
Emission Controls:
Air injection system, EGR, catalytic converter, and emissions-related sensors and actuators
Engine Controls:
Carburetor (various models), fuel injection (later models), ECU, and sensor inputs/outputs
Transmission Manual:
Clutch, gearbox disassembly, assembly, gear ratios, and maintenance
Transmission Automatic:
Disassembly, assembly, hydraulic control, and maintenance (if applicable to specific models)
Driveline:
Driveshaft, differential, rear axle, and universal joints
Suspension:
Front and rear suspension components, struts, shocks, bushings, and alignment specifications
Steering:
Steering gear, steering column, power steering system (if equipped), and tie rod ends
Brakes:
Disc and drum brake systems, hydraulic lines, master cylinder, calipers, wheel cylinders, and brake pad/shoe replacement
Wheels And Tires:
Tire pressure, rotation, wheel installation, and specifications
Fuel System:
Fuel tank, fuel pump, fuel lines, fuel filters, and carburetor/injection system components
Exhaust System:
Exhaust manifold, pipes, muffler, and catalytic converter replacement
HVAC:
Heating, Ventilation, and Air Conditioning system components, refrigerant, and operation
Instrumentation And Warning Systems:
Dashboard gauges, warning lights, sensors, and indicator functionality
Lighting:
Headlights, taillights, interior lights, and wiring diagrams for lighting circuits
Electrical:
Complete electrical system, wiring diagrams, fuses, relays, switches, and component testing
Body Interior:
Interior trim, seats, dashboard, door panels, and related components
Body Exterior:
Body panels, doors, hood, trunk, bumpers, glass, and trim removal/installation
Maintenance Procedures:
Scheduled maintenance, fluid changes, filter replacements, lubrication
Tune Up Procedures:
Spark plug replacement, ignition timing adjustment, carburetor adjustment
Troubleshooting:
Systematic diagnosis of common and uncommon problems with symptom-cause-effect tables
Repair Procedures:
Step-by-step instructions for component replacement, repair, and adjustment
Disassembly And Assembly:
Detailed instructions for taking apart and reassembling major vehicle systems and components
Electrical Diagnostics:
Troubleshooting electrical faults using wiring diagrams, multimeter testing, and component diagnosis
Depth:
Comprehensive: Covers from basic maintenance to complete engine rebuilds and complex electrical diagnostics
Detail Level:
High: Features detailed exploded views, diagrams, photographs, and step-by-step instructions
Oil Change:
Every 3,000 miles or 3 months (crucial for rotary engines)
Spark Plugs:
Check/replace every 15,000-20,000 miles (specific types for rotary engines)
Coolant Flush:
Every 24,000 miles or 24 months
Engine Oil:
API SG or higher, SAE 20W-50 or 10W-30 recommended (rotary-specific oils sometimes preferred)
Coolant:
Ethylene glycol-based coolant, 50/50 mix with distilled water
Transmission Fluid Manual:
API GL-4 SAE 75W-90 gear oil
Transmission Fluid Automatic:
Dexron III (or equivalent)
Brake Fluid:
DOT 3 or DOT 4 brake fluid
Apex Seals:
Wear or failure of apex seals leading to compression loss and poor performance
Oil Consumption:
Rotary engines inherently consume a small amount of oil for lubrication; excessive consumption indicates a problem
Carburetor Issues:
Deterioration of gaskets, diaphragms, and vacuum leaks in older carburetors
Thermal Reliance:
Rotary engines are sensitive to overheating; cooling system maintenance is critical
Wiring Harness Deterioration:
Aging electrical components and wiring can lead to intermittent faults
