Engine Mechanical:
Complete engine overhaul, assembly, disassembly, timing belt, pistons, connecting rods, crankshaft, cylinder head, valves, seals, gaskets.
Engine Management:
ECU diagnosis, sensor testing (MAP, MAF, TPS, O2), ignition system, fuel injection system (injectors, fuel pump, pressure regulator).
Fuel System:
Fuel tank, fuel lines, fuel filter, high-pressure fuel pump, injectors, fuel pressure regulator.
Cooling System:
Radiator, water pump, thermostat, coolant hoses, fan operation, pressure testing.
Lubrication System:
Oil pump, oil pan, oil filter, oil cooler, lubrication passages, oil pressure testing.
Transmission Manual:
Gearbox disassembly, assembly, clutch system, input/output shafts, synchronizers, seals, bearings, shift linkage.
Transmission AWD:
Active Yaw Control (AYC) system, center differential, front/rear differentials, transfer case, driveshafts, prop shaft, viscous coupling.
Drivetrain:
CV joints, axle shafts, wheel bearings, hub assemblies.
Suspension Front:
MacPherson strut design, control arms, sway bar, bushings, springs, shock absorbers, steering knuckle, wheel hub.
Suspension Rear:
Multi-link independent suspension, trailing arms, lateral links, coil springs, shock absorbers, sway bar, bushings.
Brakes Front:
Brembo ventilated discs, multi-piston calipers, brake pads, brake lines, ABS system (wheel speed sensors, hydraulic unit).
Brakes Rear:
Brembo ventilated discs, multi-piston calipers, brake pads, brake lines, ABS system.
Steering System:
Power steering rack and pinion, hydraulic pump, steering column, tie rods, alignment specifications.
Electrical System Charging:
Alternator, battery, starter motor, wiring diagrams, charging circuit diagnostics.
Electrical System Lighting:
Headlights, taillights, turn signals, interior lighting, fog lights, bulb specifications, wiring.
Electrical System Accessories:
Wipers, horn, power windows, central locking, HVAC controls, audio system, instrumentation cluster.
Body Exterior:
Body panel removal and installation, trim, bumpers, spoilers, hood, trunk, doors, fenders, rust repair procedures.
Body Interior:
Dashboard removal, seat removal, carpet replacement, headliner, door panels, center console.
HVAC System:
Air conditioning compressor, condenser, evaporator, refrigerant lines, blower motor, cabin filter, controls.
Routine Maintenance:
Oil changes, filter replacements, fluid checks and changes, spark plug replacement, tire rotation.
Troubleshooting:
Diagnostic flowcharts, symptom-based troubleshooting for mechanical and electrical issues.
Engine Repair:
Complete engine rebuilds, head gasket replacement, piston ring replacement, bearing replacement, timing chain/belt service.
Transmission Repair:
Manual and AYC transmission rebuilds, clutch replacement, differential overhaul.
Brake System Repair:
Brake pad and rotor replacement, caliper rebuild, brake line replacement, bleeding procedures, ABS component testing.
Suspension And Steering Repair:
Shock absorber and strut replacement, bushing replacement, ball joint and tie rod end replacement, wheel alignment procedures.
Electrical Diagnostics:
Wiring diagram interpretation, component testing, troubleshooting of electrical faults.
Body Repair:
Panel replacement, dent repair, rust remediation, glass replacement, door and lock mechanism repair.
HVAC Service:
Refrigerant system service, component replacement, leak testing, cabin air filter replacement.
Depth:
Comprehensive: Covers everything from basic maintenance to full engine and transmission rebuilds, including advanced diagnostics.
Diagnostic Capabilities:
Detailed diagnostic procedures for all major systems, including specific DTC (Diagnostic Trouble Code) explanations and resolution steps.
Torque Specifications:
Extensive list of torque specifications for all critical fasteners and components.
Clearances And Tolerances:
Precise measurements for engine components (piston-to-bore, bearing clearances), suspension, and drivetrain.
Wiring Diagrams:
Full, detailed electrical wiring diagrams for all vehicle systems, including color coding and component locations.
Special Tools:
Identification and usage instructions for specialized tools required for specific repair procedures.
Oil Change Interval:
Every 5,000 - 7,500 km (3,000 - 4,500 miles) or 6 months, whichever comes first, with high-performance synthetic oil.
Timing Belt Replacement:
Every 90,000 km (56,000 miles) or 7 years, whichever comes first. Critical component.
Spark Plug Replacement:
Every 40,000 - 60,000 km (25,000 - 37,000 miles) with appropriate performance plugs.
Coolant Flush Interval:
Every 2-3 years or 40,000-60,000 km.
Engine Oil Specification:
API SG or higher; SAE 10W-40, 15W-40, or 5W-40 (depending on climate). Full synthetic recommended for performance driving.
Engine Oil Capacity:
4.5 Liters (4.8 US Quarts) with filter change.
Coolant Type:
Mitsubishi Super Long Life Coolant (or equivalent ethylene glycol based coolant) with a 50/50 mix with distilled water.
Transmission Fluid Type:
GL-4 SAE 75W-90 or GL-5 SAE 75W-90 (confirm specific differential requirements).
Transfer Case Fluid Type:
GL-5 SAE 75W-90
Rear Differential Fluid Type:
GL-5 SAE 75W-90
Ayc Fluid Type:
Specific AYC Fluid (consult manual for exact specification or equivalent like Mitsubishi DiaQueen LSD Fluid-SS).
Brake Fluid Type:
DOT 3 or DOT 4.
Common Issues:
Cracked cylinder heads (especially with increased boost), premature turbo wear, AYC system failures, clutch wear, rust in common areas (wheel arches, sills), front diff wear.