Segment:
Performance Mountain Snowmobile
Intended Use:
Designed for deep snow, backcountry riding, and aggressive mountain terrain
Competitors:
Competes with other high-performance mountain sleds from Ski-Doo (Summit) and Arctic Cat (M Series)
Chassis:
RMK chassis optimized for agility and weight transfer in deep snow
Suspension Travel:
Long travel suspension designed for excellent flotation and bump absorption
Track Length:
155-inch track length for superior traction and floatation in deep powder
Value:
Provides essential knowledge for maintaining peak performance and ensuring longevity of the snowmobile
Engine:
Engine overhaul, disassembly, assembly, tuning, diagnostics, specific component repair (pistons, rings, cylinders, crankshaft, bearings, cooling system, lubrication system)
Fuel System:
Fuel injection system (EFI) components, injectors, fuel pump, fuel lines, throttle body, sensors, troubleshooting, cleaning, and calibration
Ignition System:
Ignition coil, spark plugs, CDI unit, stator, troubleshooting ignition problems, timing adjustments
Drive System:
CVT clutch system (primary and secondary), belt replacement, clutch tuning, gearcase lubrication, chain tension, and adjustment
Suspension:
Front and rear suspension components, shock absorbers, springs, linkage systems, bushings, adjustment procedures, lubrication, and replacement
Steering:
Handlebars, steering post, tie rods, steering post support, lubrication, adjustment, and troubleshooting steering play
Brakes:
Hydraulic brake system, brake caliper, master cylinder, brake fluid, bleeding procedures, pad replacement, rotor inspection, and adjustment
Electrical System:
Wiring diagrams, lighting system, starter motor, battery, charging system, switches, sensors, troubleshooting electrical faults, diagnostic codes
Bodywork:
Panel removal and installation, seat assembly, windshield, running boards, tunnel, graphics, and cosmetic repairs
Maintenance:
Scheduled maintenance tasks, oil changes, filter replacements, chain lubrication, track inspection, shock absorber lubrication, and general upkeep
Troubleshooting:
Systematic diagnostic procedures for common problems, error code interpretation, and solutions for performance issues
Repair:
Detailed step-by-step instructions for component disassembly, repair, rebuilding, and reassembly
Overhaul:
Comprehensive instructions for complete engine and major component overhauls
Adjustment:
Tuning and adjustment procedures for various systems, including engine, clutches, and suspension
Depth:
In-depth technical information suitable for certified technicians and experienced DIY mechanics
Detail Level:
Detailed specifications, torque values, clearances, diagnostic charts, and exploded views
Type:
CVT (Continuously Variable Transmission)
Clutches:
Polaris P-85 Primary and ADJ Secondary Clutch
Gear Selection:
Forward, Neutral, Reverse (FN/R) via a selector lever
Drive Chain Sprocket Ratio:
Specific ratio will be detailed in the manual (e.g., 35/40 or similar)
Gearcase Oil:
Specific gearcase oil type and capacity (e.g., Polaris Gearcase Lube, SAE 80W-90)
Oil Change Engine:
Refer to manual for specific hours/mileage (typically every 100 hours or annually)
Clutch Maintenance:
Inspect belt, rollers, and weights at 50-hour intervals, replace belt as needed
Track Inspection:
Check track tension and condition regularly, adjust as per manual specifications
Suspension Lubrication:
Lubricate suspension zerks and pivot points every 50 hours
Engine Oil:
Specific 2-stroke injection oil (e.g., Polaris Synthetic 2-Stroke Oil)
Gearcase Oil:
Polaris Gearcase Lube, SAE 80W-90, or equivalent
Coolant:
Ethylene glycol-based antifreeze, 50/50 mix with distilled water
Brake Fluid:
DOT 4 hydraulic brake fluid
Common Wear Items:
Drive belts, shock absorber bushings, slider shoes (on tunnel), carbides
Engine Maintenance:
Proper pre-mix or oil injection system maintenance is critical for 2-stroke engine longevity.
Manufacturer:
Polaris Industries, founded in 1954
Segment Focus:
Long history of innovation in snowmobiles, ATVs, and powersports vehicles
Rmk Lineage:
RMK (Riding Mountain অভিজ্ঞতা) series is Polaris' dedicated mountain climbing platform
2011 Updates:
While the 600 RMK 155 was a well-established model, 2011 saw refinements in suspension, chassis, and engine tuning for improved performance.
Manufacturing Location:
Polaris vehicles are primarily manufactured in the USA (Roseau, Minnesota and Spirit Lake, Iowa)