Segment:
Premium/Mid-range Agricultural Tractor (Profi Series)
Target User:
Farmers, agricultural contractors, farm mechanics, dealership service departments.
Competitors:
John Deere (6M, 6R series), Massey Ferguson (7S, 8S series), Case IH (Maxxum, Puma series), New Holland (T7 series), Fendt (300 Vario, 500 Vario series).
Technology Focus:
Known for advanced transmission technologies (e.g., VT-Drive CVT for some models), sophisticated hydraulics, and operator comfort features.
Manual Value Proposition:
Essential resource for accurate maintenance, troubleshooting, and repair to maximize uptime and performance of Steyr Profi tractors.
Primary Coverage:
Comprehensive service and repair procedures for Steyr Profi series tractors.
Diagnostic Scope:
Includes troubleshooting guides for common and uncommon issues.
Component Coverage:
Engine, transmission, hydraulics, electrical system, chassis, PTO, and more.
Estimated Page Count:
Detailed page count not specified in product information, but typical for a comprehensive service manual would be 800-1500+ pages.
Type:
Service and Repair Manual
Searchability:
Searchable
Powertrain:
Engine mechanical, fuel system, lubrication system, cooling system, exhaust system, engine management (ECU), transmission (Powershift/CVT), final drives, differential locks.
Hydraulic System:
Hydraulic pump, control valves, cylinders, hitch control, power beyond, auxiliary hydraulics.
Electrical System:
Battery, alternator/generator, starter, lighting system, dashboard instruments, wiring diagrams, sensor diagnostics, ECU diagnostics.
Chassis And Body:
Front axle, steering system, braking system, PTO (Power Take-Off) system, hitch assembly, operator's cab (HVAC, controls, comfort features), body panels.
Maintenance:
Scheduled maintenance tasks, fluid changes, filter replacements, lubrication points, inspections.
Repair:
Component disassembly and reassembly, component overhaul, specific repair instructions for common failures.
Diagnostics And Troubleshooting:
Diagnostic codes, fault tracing procedures, symptom-based troubleshooting.
Adjustment And Calibration:
Valve clearances, clutch adjustments, hydraulic pressure adjustments, sensor calibration.
Depth:
Comprehensive, covering basic to advanced repair and diagnostic procedures. Suitable for dealership technicians and experienced mechanics.
Detail Level:
Includes torque specifications, clearances, diagnostic parameters, wiring diagrams, and step-by-step instructions with illustrations/diagrams.
Manufacturer:
Steyr/CNH Industrial (often FPT Industrial engines)
Engine Family:
Typically NEF or Cursor series (Tier 4/Stage IV compliant common)
4110 Profi Horsepower:
Approx. 110 HP (rated, may vary with boost)
4120 Profi Horsepower:
Approx. 120 HP (rated, may vary with boost)
4130 Profi Horsepower:
Approx. 130 HP (rated, may vary with boost)
6115 Profi Horsepower:
Approx. 115 HP (rated, may vary with boost)
6125 Profi Horsepower:
Approx. 125 HP (rated, may vary with boost)
6140 Profi Horsepower:
Approx. 140 HP (rated, may vary with boost)
Peak Torque:
Generally in the range of 450-600 Nm depending on model and specific engine tuning.
Injection Type:
Common Rail Direct Injection (CRDI)
Emissions Control:
Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR) with AdBlue, Exhaust Gas Recirculation (EGR).
Displacement:
Typically 4.5L or 6.7L for these models.
Cylinder Configuration:
4-cylinder or 6-cylinder inline
Type:
CVT (Continuously Variable Transmission) - VT-Drive is a common Steyr branding for their CVT.
Type:
Powershift transmissions (e.g., 16x16, 24x24) may be available on some variants or older models.
Transmission Features:
Proportional speed control, cruise control functionality, automatic gear shifting based on load and speed, engine-PTO synchronization.
Transmission Fluid:
Typically a high-quality UTTO (Universal Tractor Transmission Oil) or specific CVT fluid. Refer to manual for exact specification (e.g., CNH MAT 3525/3540).
Wheelbase:
Varies by model, typically 2.4m - 2.7m.
Overall Length:
Varies by model, typically 4.5m - 5.0m.
Overall Width:
Varies by model and tire configuration, typically 2.0m - 2.5m.
Unladen Weight:
Varies by model and configuration, generally 5,000 kg - 7,000 kg.
Gross Vehicle Weight:
Can exceed 9,000 kg with ballast and implements.
Rollover Protection:
ROPS (Roll Over Protective Structure) is standard and integrated into the cab design.
Braking System:
Hydraulic wet disc brakes, often with brake assist and integrated trailer braking capabilities.
Steering System:
Hydrostatic power steering, often with variable ratio steering options.
Operator Protection:
Pressurized and sealed cab with excellent visibility, seat belt, ergonomic controls, and climate control.
Cab Features:
Climate control, advanced ergonomic seating, intuitive control consoles (e.g., joystick for hydraulics), optional digital displays for performance monitoring.
Performance Monitoring:
On-board diagnostics, fuel consumption monitoring, PTO speed management, transmission operation modes.
Guidance Systems:
Many Profi models are equipped for or pre-wired for GPS guidance systems (e.g., Steyr S-Guide, Trimble, John Deere StarFire compatibility).
Telematics:
Optional telematics systems for remote monitoring, diagnostics, and fleet management (e.g., CNH's FMIS integration).
Engine Oil And Filter:
Typically every 500 hours (refer to manual for exact interval and oil grade).
Hydraulic Oil And Filter:
Typically every 1200-1800 hours (refer to manual for exact interval and oil grade).
Fuel Filters:
Replace as per manual recommendations, usually tied to service intervals or specific operating hours.
Engine Oil:
SAE 10W-40 or 15W-40 synthetic or semi-synthetic diesel engine oil meeting API CJ-4/CK-4 or ACEA E7/E9 specifications. Specific CNH approval may be required (e.g., MS-101).
Coolant:
Ethylene glycol-based coolant with appropriate corrosion inhibitors, typically a heavy-duty OAT (Organic Acid Technology) formulation. 50/50 mix with distilled water.
Hydraulic Fluid:
UTTO (Universal Tractor Transmission Oil) meeting CNH MAT 3525 or equivalent, or specific CVT fluid as per manual. Viscosity grade typically ISO VG 32 or 46.
Common Issues:
Potential issues can include AdBlue system faults (DPF regeneration failures), hydraulic valve leaks, electrical sensor failures (e.g., ABS sensors, engine sensors), and CVT transmission control unit issues. Software updates may be required for certain functions.
Maintenance Focus:
Strict adherence to maintenance schedules, use of correct fluids, and ensuring proper DPF regeneration cycles are critical for longevity.
Origin:
Steyr is an Austrian brand with a long history in agricultural machinery manufacturing, now part of CNH Industrial.
Profi Series Introduction:
The Profi series represents a significant evolution in Steyr's tractor lineup, focusing on comfort, efficiency, and technology. It has undergone continuous updates to meet emissions standards and enhance features.
Manufacturing Location:
Primarily manufactured in St. Valentin, Austria.
Design Awards:
Steyr tractors, including the Profi series, have often been recognized for their design, innovation, and ergonomics in agricultural machinery competitions.
User Satisfaction:
Generally high user satisfaction reported for comfort, performance, and reliability, contingent on proper maintenance.
