🏷️ Basic Information

Make:

Mitsubishi

Model:

Galant

Generation:

Eighth Generation (E30, E50, E60, E70, E80)

Product Name:

Mitsubishi Galant 1996-2003 Service Repair Workshop Manual PDF Download

Chassis Codes Covered:

E31A, E32A, E33A, E34A, E35A, E38A, E39A, E52A, E53A, E54A, E55A, E56A, E57A, E64A, E74A, E75A, E77A, E84A, E85A, E86A, E87A

👋 Introduction

Market Position:

The Mitsubishi Galant from 1996-2003 was a mid-size sedan known for its comfortable ride, available V6 engines, and distinctive styling for its era. It competed in a crowded segment against vehicles like the Toyota Camry, Honda Accord, and Ford Taurus.

Competitive Advantage:

While perhaps not always achieving the sales volumes of its Japanese rivals, the Galant often offered a compelling blend of value, performance (particularly with the V6), and a unique design that appealed to a discerning buyer. The availability of all-wheel drive on some models also provided a competitive edge.

Key Features:

The Eighth Generation Galant featured a stylish, aerodynamic design, a well-appointed interior, and a focus on ride comfort. Performance variants, especially those with the 2.5L V6, offered spirited acceleration.

📋 Manual Details

Applicable Model Years:

1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

Regional Coverage:

Global (specific to model variants covered)

Estimated Page Count:

Likely several thousand pages (typical for comprehensive workshop manuals)

Manual Type:

Service Repair Workshop Manual

Language:

English

Format:

PDF Download

📖 Manual Coverage

Engine Mechanical:

Complete overhaul, timing belt/chain replacement, cylinder head, block assembly, piston and connecting rod, crankshaft, lubrication, cooling system, performance tuning.

Engine Electrical:

Ignition system, starter motor, alternator, battery, engine control system (ECU), sensors (crankshaft position, camshaft position, knock, O2), wiring diagrams, troubleshooting.

Emission Control System:

Evaporative emission control (EVAP), exhaust gas recirculation (EGR), catalytic converter, secondary air injection system, diagnostic trouble codes (DTCs) related to emissions.

Fuel System:

Fuel tank, fuel pump, fuel filter, fuel injectors, fuel pressure regulator, throttle body, fuel injection system diagnostics and repair.

Clutch System:

Clutch disc, pressure plate, release bearing, clutch hydraulic system (master cylinder, slave cylinder), adjustment and replacement.

Manual Transaxle System:

Gearbox overhaul, shifting mechanism, internal components, fluid specifications, troubleshooting, repair procedures.

Automatic Transaxle System:

Transmission control unit (TCU), hydraulic control system, torque converter, gear sets, planetary gears, valve body, shift solenoids, fluid specifications, diagnostic procedures.

Driveshaft And Axle:

Front and rear driveshafts, CV joints, axle shafts, differential (if applicable), boot replacement, balancing, repair.

Suspension System:

Front and rear suspension components (struts, shocks, control arms, ball joints, bushings), alignment specifications, troubleshooting, replacement.

Steering System:

Power steering system (pump, rack and pinion, hoses), steering column, tie rod ends, alignment, troubleshooting, repair.

Restraint System:

Airbag system (SRS), seat belts, pre-tensioners, diagnostic procedures for airbag faults, replacement of components.

Brake System:

Front and rear disc brakes, brake pads, rotors, calipers, brake lines, master cylinder, ABS system (Anti-lock Braking System) components and diagnostics, parking brake.

Body Interior And Exterior:

Door panels, dashboard, seats, upholstery, exterior trim, bumpers, hood, trunk lid, glass replacement, sealing.

Body Electrical System:

Lighting (headlights, taillights, interior lights), power windows, power locks, mirrors, wipers, horn, fuse box diagrams, wiring for accessories.

Heating Ventilation Air Conditioning:

HVAC system components (compressor, condenser, evaporator, blower motor), refrigerant, system charging, diagnostics, climate control panel.

Maintenance:

Scheduled maintenance, oil changes, filter replacements, fluid checks and changes, tune-ups, spark plug replacement, brake fluid flush.

Troubleshooting:

Diagnostic procedures for common and uncommon faults, symptom-based troubleshooting guides, use of diagnostic tools.

Repair:

Step-by-step repair instructions for all major systems, component replacement, reassembly, testing.

Diagnostics:

Detailed diagnostic flowcharts, use of scan tools, interpretation of diagnostic trouble codes (DTCs), electrical system diagnostics.

Wiring Schematics:

Comprehensive wiring diagrams for all electrical systems, component location charts.

Technical Depth:

Factory-level repair and diagnostic information, suitable for professional technicians and advanced DIY enthusiasts.

Illustrations:

Abundant diagrams, illustrations, and photographs to guide repairs.

Torque Specifications:

Detailed torque specifications for all fasteners and critical components.

Clearances And Tolerances:

Precise specifications for engine component clearances, bearing tolerances, and other critical measurements.

📊 Manual Specifications

File Format:

PDF

Printability:

Yes, all pages are printable.

Digital Features:

Searchable text for quick information retrieval.

Binding Type:

N/A (Digital PDF)

Paper Type:

N/A (Digital PDF)

Operating Systems:

Compatible with all versions of Windows and Mac.

Reader Requirements:

Requires Adobe PDF Reader.

⚙️ Engine Specifications

Engine Options Overview:

The manual covers multiple engine variants offered during this generation, primarily the 4-cylinder 4G63/4G64 SOHC/DOHC and the V6 6A12/6A13 SOHC/DOHC.

4 Cylinder Engine Specs:

Commonly the 2.4L 4G64 SOHC engine, producing approximately 140-150 horsepower and 150-160 lb-ft of torque. Specific outputs varied by year and market. The 2.0L 4G63 was also used in some markets.

V6 Engine Specs:

The 2.5L 6A13 V6 SOHC and DOHC engines were prominent, delivering around 160-200 horsepower and 160-185 lb-ft of torque, depending on the DOHC configuration and specific tuning. High-performance VR-4 models featured turbocharged variants of the 6A13 or the 4G63.

Fuel Delivery:

Multi-point fuel injection (MPI) for all gasoline engines covered.

Fuel Type:

Unleaded gasoline.

ECM Identification:

Engine Control Module (ECM) or Powertrain Control Module (PCM) utilizes proprietary Mitsubishi diagnostic protocols. Specific ECM part numbers would be detailed within the manual.

🔧 Transmission

Standard Transmission:

5-speed manual transaxle.

Optional Transmission:

4-speed or 5-speed automatic transaxle (e.g., F4A33, F5A51).

All Wheel Drive:

Available on certain trim levels and performance variants (e.g., AWD on VR-4 models), featuring an Active Front Differential (AFD) or viscous coupling center differential.

Manual Transmission Fluid:

Typically API GL-4 or GL-5 gear oil, with specific viscosity grade (e.g., 75W-90 or 80W-90) detailed in the manual. Capacity: Approx. 2.5-3.0 liters.

Automatic Transmission Fluid:

Mitsubishi SPII-FW or equivalent ATF. Capacity: Approx. 7.0-8.5 liters for a complete fluid change.

📐 Dimensions

Length:

Approx. 4,635 mm (182.5 in)

Width:

Approx. 1,740 mm (68.5 in)

Height:

Approx. 1,400 mm (55.1 in)

Curb Weight:

Ranges from approximately 1,350 kg to 1,550 kg (2,976 lbs to 3,417 lbs) depending on engine and drivetrain.

Gross Vehicle Weight Rating:

Specifications vary by model, consult manual for specific GVWR.

🛡️ Safety Features

NHTSA Ratings Overview:

Safety ratings varied by year and specific testing protocols of the era. Frontal impact ratings are generally available, while side impact and rollover ratings are less consistently documented for this period.

ABS:

Anti-lock Braking System (ABS) was available on most models, particularly higher trims and those with V6 engines.

Traction Control:

Traction control systems (TCS) were introduced on some models, especially with AWD configurations.

Airbags:

Driver and front passenger airbags were standard on most models by the latter half of this generation. Side airbags were optional on some higher trims.

Seat Belts:

Front and rear seat belts, with pre-tensioners for front occupants on later models.

💡 Technology Features

Audio System:

Factory-equipped audio systems typically included AM/FM radio with cassette tape and/or CD player. Upgrades to modern head units are common.

Climate Control:

Manual or automatic climate control systems were available, depending on trim level.

Cruise Control:

Cruise control was a common feature on most models.

Connectivity Features:

Limited by modern standards. Primarily focused on in-car entertainment and basic comfort features. No integrated Bluetooth or advanced smartphone connectivity from the factory.

🔧 Maintenance

Oil Change Interval:

Typically every 5,000-7,500 miles (8,000-12,000 km) or 6-12 months, depending on driving conditions and oil type. Consult manual for precise recommendations.

Timing Belt Replacement:

Critical maintenance item for 4-cylinder engines (e.g., 4G63/4G64). Interval is typically 60,000-90,000 miles (96,000-144,000 km). Failure can cause severe engine damage. V6 engines often used timing chains.

Spark Plug Replacement:

Intervals vary by plug type (copper, platinum, iridium), but generally range from 30,000 to 100,000 miles. Manual will specify the exact type and interval.

Engine Oil Type:

Typically SAE 5W-30 or 5W-40 API SJ or higher, depending on climate. Check manual for exact specifications and viscosity for specific engine.

Coolant Type:

Ethylene glycol-based antifreeze. Mixture of 50/50 coolant and distilled water. Capacity: Approx. 7-8 liters for 4-cyl, 8-9 liters for V6.

Brake Fluid Type:

DOT 3 or DOT 4 brake fluid.

Engine Mounts:

Worn engine mounts can lead to increased vibration, especially at idle.

Suspension Bushings:

Wear in control arm bushings and other suspension components can result in clunking noises and poor handling.

Automatic Transmission Reliability:

Some automatic transmissions from this era could experience issues related to solenoids or valve bodies if fluid maintenance was neglected.

Exhaust System:

Corrosion of exhaust components is common in areas with road salt.

Cv Axle Boots:

Torn CV axle boots can lead to premature wear of the joints.

📚 Vehicle History

Mitsubishi History Context:

Mitsubishi Motors has a long history in automotive manufacturing, known for its engineering prowess, particularly in rallying and performance vehicles (e.g., Lancer Evolution, Eclipse). The Galant represented their commitment to a broad range of passenger cars.

Galant Eighth Generation Evolution:

The Eighth Generation Galant (introduced for the 1994 model year in Japan and later in other markets) moved to a more aerodynamic and luxurious design compared to its predecessors. It was built on a new platform, offering improved chassis dynamics and interior space. The VR-4 variant, a performance flagship, continued this generation with potent turbocharged engines and advanced AWD systems.

Production Locations:

Primarily manufactured in Japan, with some assembly potentially occurring in other global locations depending on market requirements.

🏆 Awards & Recognition

Historic Recognition:

While specific awards for the 1996-2003 Galant model years are not widely documented as major automotive accolades, the model was generally well-received for its design and value proposition within its segment during its production run.