Product Purpose:
To provide owners and technicians with complete information for the repair and maintenance of the Suzuki LT-F300 King Quad.
Value Proposition:
Offers a reliable, in-depth resource for maintaining and repairing a specific model range of ATVs, potentially saving on professional labor costs.
Comprehensiveness:
Covers multiple model years and specific variants, offering a unified and detailed repair guide.
Accessibility:
Instant download format makes it readily available for immediate use.
Applicable Years:
1999, 2000, 2001, 2002, 2003, 2004
Specific Models Covered:
LT-F300 King Quad, LT-F300 'Y', LT-F300 'FY' (2000), LT-F300 'K1', LT-F300 'FK1' (2001), LT-F300 'FK2' (2002)
Estimated Page Count:
High (typical for comprehensive service manuals)
Type:
Service Manual / Repair Manual / Workshop Manual
Format:
PDF / WinRAR Download
Engine:
Complete overhaul, diagnostics, lubrication system, fuel system, cooling system (if applicable), ignition system.
Transmission Drivetrain:
Shaft drive differential gears, gearbox operation, troubleshooting, maintenance.
Chassis Suspension:
Frame, suspension components (front and rear), steering system, wheel bearings, hubs.
Electrical System:
Wiring diagrams, lighting, ignition, starter system, charging system, battery, fault diagnosis.
Fuel System:
Carburetor (type and model specific), fuel pump, fuel lines, fuel tank, filters.
Lubrication System:
Oil pump, oil filter, oil passages, oil types, capacities.
Preventative Maintenance:
Scheduled inspections, fluid changes, filter replacements, lubrication points, brake adjustments, tire pressure checks.
Troubleshooting:
Step-by-step diagnostic procedures for common and uncommon issues, symptom-based troubleshooting charts.
Repair Overhaul:
Detailed instructions for engine disassembly/reassembly, transmission repair, suspension component replacement, electrical component repair.
Servicing Information:
General checks, adjustments, torque specifications, fastener tightening sequences.
Depth:
Comprehensive - covers basic maintenance to complete engine and drivetrain rebuilds, including detailed diagnostics.
Engine Type:
Four-stroke, SOHC, air-cooled
Displacement:
280cc (approximately, based on model designation)
Bore X Stroke:
Not explicitly stated, but typical for a 280cc single-cylinder engine of this era.
Compression Ratio:
Not explicitly stated.
Horsepower:
Not explicitly stated, but typically in the 18-22 HP range for this class of ATV.
Torque:
Not explicitly stated.
Fuel Delivery:
Carburetor (likely a Mikuni BS series, model specific to year)
Carburetor Size:
Not explicitly stated, but commonly 30mm-34mm for this displacement.
Oil Capacity:
Approximately 1.5 - 1.8 Liters (refer to manual for exact specification and type)
Oil Type Specification:
API SG or higher, SAE 10W-40 or 20W-50 recommended depending on operating temperature (refer to manual for precise recommendation).
Ignition Type:
CDI (Capacitor Discharge Ignition)
Transmission Type:
Automatic (CVT - Continuously Variable Transmission)
Drive Type:
Shaft Drive with Differential (4WD)
Gear Selection:
High, Low, Neutral, Reverse
Cv Belt Maintenance:
Covered in manual: inspection, replacement procedures, torque specifications for clutch components.
Length:
Not explicitly stated, but typical for a mid-size ATV of this era (approx. 78-82 inches).
Width:
Not explicitly stated, but typical for a mid-size ATV of this era (approx. 42-46 inches).
Height:
Not explicitly stated, but typical for a mid-size ATV of this era (approx. 43-47 inches).
Dry Weight:
Approximately 550-575 lbs (refer to manual for exact specification).
Ground Clearance:
Approximately 7.0-8.0 inches (refer to manual for exact specification).
Towing Capacity:
Not specified, but typically limited for this class of ATV.
Rack Capacity Front:
Not specified, but typically around 44 lbs.
Rack Capacity Rear:
Not specified, but typically around 88 lbs.
Atv Safety Standards:
Adheres to industry safety standards for ATVs of its era. Manual will cover safe operating procedures.
Braking System:
Hydraulic disc brakes (front and rear). Manual will detail pad replacement, fluid bleeding, caliper service.
Parking Brake:
Drum brake or disc brake based system, location and operation detailed in manual.
Lighting:
Headlights, taillight, brake light. Manual covers bulb replacement, troubleshooting.
Dashboard Indicators:
Speedometer, odometer, fuel gauge (if equipped), indicator lights for 4WD, oil pressure, neutral, etc. Manual details function and troubleshooting.
Four Wheel Drive System:
Engageable 4WD system with differential lock capability. Manual covers system operation and maintenance.
Diagnostic Ports:
Not applicable in the modern sense; diagnostics rely on visual inspection, multimeter testing, and component testing as per manual procedures.
Engine Oil Change:
Typically every 3 months or 1000 miles (600 hours of operation), but refer to manual for exact intervals based on usage.
Air Filter Cleaning:
Recommended every 3 months or 100 hours, more frequently in dusty conditions. Manual will detail cleaning and oiling procedures.
Spark Plug Replacement:
Typically every 12 months or 6000 miles (360 hours of operation). Manual will specify gap and type.
Valve Adjustment:
Recommended every 12 months or 6000 miles (360 hours). Manual provides clear specifications and procedures.
Brake Fluid Flush:
Recommended every 24 months or 12,000 miles (720 hours). Manual will specify fluid type (DOT 3 or 4).
Coolant Type:
If liquid-cooled (though this model is likely air-cooled). If present, typically ethylene glycol-based antifreeze.
Transmission Fluid Type:
Gear oil for the differential and gearbox. Manual specifies viscosity grade (e.g., SAE 80W-90) and capacity.
Common Wear Items:
CVT belt, brake pads, wheel bearings, starter motor brushes, carburetor jets (clogging).
Potential Problems:
Overheating if air-cooling fins are blocked, carburetor performance degradation due to fuel quality, suspension wear.