Models Covered:
All Chrysler and Dodge Neon models for the 2000 model year
Engine Variants Covered:
All engine options available for the 2000 model year
Trim Levels Covered:
All trim levels (e.g., base, ES, SE, Sport, ACR)
Transmission Types Covered:
All transmission options (e.g., manual, automatic)
Estimated Page Count:
Approx. 1500-2000+ pages (typical for comprehensive workshop manuals)
Manual Type:
Workshop Repair Service Manual
Engine Mechanical:
Engine assembly, cylinder head, valve train, pistons, connecting rods, crankshaft, lubrication system, cooling system, timing system (belt/chain)
Engine Performance:
Fuel injection system (MPI), ignition system, emissions control systems (EVAP, EGR), engine diagnostics, troubleshooting engine performance issues
Transmission Manual:
Manual transmission removal and installation, internal component inspection and repair, clutch system service
Transmission Automatic:
Automatic transmission removal and installation, internal component inspection and repair, torque converter service, transmission fluid and filter changes, electronic controls
Drivetrain:
Front-wheel drive axles, CV joints, wheel bearings, differential service
Suspension:
Front and rear suspension components (struts, control arms, bushings, ball joints, sway bars), alignment specifications
Steering:
Power steering system (pump, rack and pinion, hoses), steering column, steering linkage
Brakes:
Front and rear brake systems (discs/drums), hydraulic system (master cylinder, brake lines, calipers, wheel cylinders), ABS system (if equipped), parking brake
Electrical System:
Battery, starting system, charging system (alternator), fuses and relays, lighting system, power windows, power door locks, horn, wipers
Body And Frame:
Body panel removal and installation, door and window mechanisms, interior trim, exterior trim, underbody, structural components
HVAC:
Heating, ventilation, and air conditioning system (compressor, condenser, evaporator, blower motor, controls)
Body Control Modules:
Body control module (BCM) functions and diagnostics (if applicable for the 2000 model year)
Preventive Maintenance:
Oil changes, filter replacements, fluid checks and top-offs, tire rotations, spark plug replacement, belt inspections
Diagnostic Troubleshooting:
Step-by-step troubleshooting guides for common and uncommon issues, diagnostic trouble codes (DTCs) and their meanings, wiring diagrams for electrical systems
Repair Procedures:
Detailed instructions for component removal, repair, reassembly, and installation
Component Replacement:
Guidance on replacing major components such as engines, transmissions, alternators, starters, radiators, brake calipers, etc.
Specifications And Torques:
Torque specifications for all fasteners, critical clearance measurements, alignment angles
Wiring Diagrams:
Complete electrical wiring diagrams for all vehicle systems
Depth Of Coverage:
Comprehensive, covering from basic maintenance to in-depth mechanical and electrical diagnostics and repairs
Diagnostic Tools:
Information relevant to using common OBD-II diagnostic tools and specific Chrysler/Dodge diagnostic procedures
Rebuild Procedures:
Detailed rebuild procedures for major components like engines and transmissions
Engine Code:
Various, commonly 2.0L SOHC (AST) and 2.0L DOHC (AGP/AJP)
2.0L Sohc (Ast) Horsepower:
Approximately 132 hp @ 6000 rpm
2.0L Sohc (Ast) Torque:
Approximately 130 lb-ft @ 4400 rpm
2.0L DOHc (Agp/Ajp) Horsepower:
Approximately 145-150 hp @ 6000 rpm (depending on specific version)
2.0L DOHc (Agp/Ajp) Torque:
Approximately 135-140 lb-ft @ 5000 rpm (depending on specific version)
Fuel Delivery:
Multi-Port Fuel Injection (MPI)
Fuel Type:
Unleaded gasoline
Configuration:
Inline 4-cylinder
Displacement:
1996 cc (122 cu in)
Bore X Stroke:
87.5 mm x 83.0 mm (typical)
Compression Ratio:
9.6:1 (SOHC), 10.0:1 (DOHC - typical)
Oil Change Interval:
Every 7,500 miles or 6 months, whichever comes first (synthetic oil recommended for longer intervals)
Engine Air Filter:
Inspect every 7,500 miles, replace as needed or at 15,000-30,000 miles
Spark Plugs:
Typically 30,000-100,000 miles, depending on plug type (refer to manual for specific recommendations)
Coolant Flush:
Every 30,000-60,000 miles or 2-4 years
Transmission Fluid Change:
Automatic: Every 30,000-60,000 miles. Manual: Inspect periodically, change if performance degrades or at higher mileage intervals.
Engine Oil:
SAE 5W-30 (API SJ or higher)
Coolant:
Mopar Antifreeze/Coolant (HOAT) or equivalent (50/50 mix with distilled water)
Power Steering Fluid:
ATF+4 or Mopar Power Steering Fluid
Common Issue 1:
Head gasket leaks (especially on early models, but can still occur)
Common Issue 2:
Oil leaks from valve cover gasket or oil pan gasket
Common Issue 3:
Premature wear of suspension components (ball joints, tie rod ends, bushings)
Common Issue 4:
Power steering pump noise or leaks
Common Issue 5:
Automatic transmission issues (e.g., torque converter shudder, shifting problems)
Common Issue 6:
Electrical issues (e.g., window regulators, power locks, HVAC controls)
