Target User:
Mechanics, technicians, and knowledgeable ATV owners seeking in-depth repair and maintenance knowledge.
Value Proposition:
Provides professional-grade repair information, enabling cost-effective maintenance and repairs, and ensuring proper vehicle operation.
Feature 1:
Utilizes industry-standard terminology and formats used by authorized service centers.
Feature 2:
Empowers users with the knowledge to perform complex repairs and diagnostics accurately.
Engine Service And Repair:
Detailed procedures for disassembly, assembly, inspection, and adjustment of engine components.
Transmission Service And Repair:
Includes information on automatic transmission operation, maintenance, and overhaul.
Fuel System And Carburetion Or Injection:
Covers fuel pump, fuel lines, fuel filter, carburetor/fuel injection system maintenance and diagnosis.
Cooling System:
Radiator, cooling fan, thermostat, coolant hoses, and water pump service.
Electrical System:
Battery, charging system (stator, regulator/rectifier), ignition system, lighting, starting system, and wiring diagrams.
Brake System:
Hydraulic brake system, calipers, master cylinder, brake lines, pads, and rotors maintenance and repair.
Suspension And Steering:
Front and rear suspension components, shocks, bushings, tie rods, and steering linkage service.
Drivetrain And Axles:
CV joints, drive shafts, differential, and final drive maintenance.
Frame And Bodywork:
Frame inspection, body panel removal/installation, fenders, and racks.
Wheels And Tires:
Tire pressure, wheel bearing inspection, and lug nut torque specifications.
Preventive Maintenance:
Routine checks, lubrication, fluid changes, filter replacements, and inspections.
Troubleshooting Guides:
Diagnostic procedures for common problems, symptom-based troubleshooting charts.
Complete Disassembly And Reassembly:
Step-by-step instructions for rebuilding major components and systems.
Torque Specifications:
Precise torque values for critical fasteners throughout the vehicle.
Wiring Diagrams:
Detailed electrical schematics for all circuits and components.
Alignment And Suspension Adjustments:
Procedures for wheel alignment and suspension tuning.
Depth Of Information:
Comprehensive, covering basic maintenance to full engine and transmission rebuilds, suitable for professional mechanics and experienced DIY enthusiasts.
Engine Type:
Liquid-cooled, 4-stroke, SOHC, V-twin EFI (Electronic Fuel Injection) - Specific displacement likely 695cc or similar for the 700 designation.
Estimated Horsepower:
Approximately 50-55 HP (subject to variation based on specific tuning and market)
Estimated Torque:
Around 40-45 lb-ft (subject to variation)
Fuel Delivery:
Electronic Fuel Injection (EFI)
Bore X Stroke:
Typically around 80mm x 69mm for a 695cc V-twin. Exact figures in manual.
Compression Ratio:
Likely in the range of 9.2:1 to 10.0:1. Exact figures in manual.
Ignition Type:
CDI (Capacitor Discharge Ignition) or similar electronic ignition system.
Length:
Typically around 83-85 inches (210-216 cm).
Width:
Typically around 46-48 inches (117-122 cm).
Height:
Typically around 48-50 inches (122-127 cm).
Dry Weight:
Around 650-700 lbs (295-318 kg).
Ground Clearance:
Typically 10-12 inches (25-30 cm).
Front Rack Capacity:
Approximately 100 lbs (45 kg).
Rear Rack Capacity:
Approximately 200 lbs (90 kg).
Towing Capacity:
Often rated at 1000-1500 lbs (454-680 kg).
Front Tire Size:
Typically 25x8-12 or 26x8-12.
Rear Tire Size:
Typically 25x10-12 or 26x10-12.
Wheel Bolt Pattern:
Typically 4x110 mm.
Atv Safety Standards:
Designed to meet applicable ANSI/SVIA safety standards for ATVs.
Braking System:
Hydraulic disc brakes on all wheels, often with engine braking through the CVT.
Selectable 4Wd And Differential Lock:
Enhances traction and control in various terrain conditions.
Lighting:
Headlights, taillights, and brake lights for visibility.
Ergonomics:
Designed for rider comfort and control during operation.
Initial Service:
First service often recommended at 10-20 operating hours or 1 month for oil change and inspection.
Engine Oil Change:
Every 100 hours or 6 months; check manual for specific intervals and conditions.
Air Filter Maintenance:
Inspect and clean/replace at regular intervals (e.g., every 50 hours or more frequently in dusty conditions).
Spark Plug Replacement:
Typically recommended every 100-200 hours.
Engine Oil Type:
Refer to manual for specific API service category, viscosity grade (e.g., SAE 10W-40 or 0W-40), and API rating (e.g., API SG, SH, SJ, SL, SM or JASO MA/MA2).
Coolant Type:
Ethylene glycol-based antifreeze suitable for all-season protection, typically a 50/50 mix with distilled water. Consult manual for specific type (e.g., OAT or HOAT).
Brake Fluid Type:
DOT 3 or DOT 4 hydraulic brake fluid. Consult manual for specific type.
Common Wear Items:
CV boots, tie rod ends, ball joints, wheel bearings, brake pads, and suspension bushings are common wear items on ATVs.
Cv Axle Issues:
Torn CV boots can lead to premature failure of the CV joints if not addressed promptly.
Efi System Maintenance:
Regular cleaning of fuel injectors and throttle body can prevent performance issues.
Manufacturer:
Arctic Cat Inc., a long-standing American manufacturer of snowmobiles, ATVs, and UTVs.
Arctic Cat Atv Lineup:
The 700 model was a significant offering in Arctic Cat's ATV lineup, featuring a powerful V-twin engine and advanced capabilities for its time.
Manufacturing Location:
Typically manufactured in Thief River Falls, Minnesota, USA.