🏷️ Basic Information

Make:

Arctic Cat

Model:

TRV 550s H1 EFI GT

Year:

2011

Chassis Code:

A2011TBO1PUSX

Trim Level:

GT COPPER

Vehicle Type:

ATV (All-Terrain Vehicle)

Product Type:

Parts Manual

👋 Introduction

Category:

Utility/Recreational ATV

Target Audience:

Outdoor enthusiasts, hunters, farmers, and recreational riders requiring a capable two-up ATV.

Competitors:

Polaris Sportsman, Can-Am Outlander, Yamaha Grizzly, Kawasaki Brute Force.

Seating:

Two-up seating configuration (TRV designation) with passenger backrest and footrests.

Engine Type:

H1 Engine architecture, known for its robustness and torque.

Fueling:

Electronic Fuel Injection (EFI) for improved throttle response, cold starting, and fuel efficiency.

Drivetrain:

4x4 selectable with front differential lock for enhanced traction.

Suspension:

Independent Front and Rear Suspension (IFS) for a smoother ride and better handling over rough terrain.

Trim Level:

GT designation often implies a higher trim level with premium features.

📋 Manual Details

Covered Sections:

Complete factory parts listing and detailed illustrations for the 2011 Arctic Cat TRV 550s H1 EFI GT COPPER.

Estimated Pages:

Varies by specific model and configuration, but typically comprehensive for a full parts manual (e.g., 500+ pages).

Type:

Factory Parts Manual

Language:

English

Format:

PDF Download

📖 Manual Coverage

Engine Assembly:

Detailed breakdown of engine components, including cylinder head, piston, crankshaft, and related parts.

Fuel System:

EFI components, fuel pump, injectors, lines, and related hardware.

Cooling System:

Radiator, fan, hoses, thermostat, and coolant system components.

Exhaust System:

Exhaust manifold, muffler, pipes, and heat shields.

Drivetrain Transmission:

CVT (Continuously Variable Transmission) assembly, including primary and secondary clutches, drive belt, and gearbox.

Drivetrain Drive Shafts:

Front and rear drive shafts, CV joints, and universal joints.

Suspension Front:

A-arms, ball joints, shocks, springs, steering knuckles, and related hardware.

Suspension Rear:

Trailing arms, independent suspension components, shocks, springs, and related hardware.

Steering System:

Steering column, tie rods, tie rod ends, and handlebar components.

Braking System:

Front and rear brake calipers, rotors, master cylinder, brake lines, and levers/pedals.

Electrical System Ignition:

Ignition coil, spark plug, CDI unit, and related wiring.

Electrical System Charging:

Stator, voltage regulator, battery, and starter motor.

Electrical System Lighting:

Headlights, taillights, brake lights, and indicator lights.

Body Panels:

Fenders, hood, seat, rack components, and fairings.

Wheels Tires:

Wheels, hubs, and lug nuts.

Accessories:

Winch, rack accessories, and other factory-installed options.

Parts Identification:

Identification of all replaceable parts with corresponding part numbers.

Assembly Disassembly:

Exploded views facilitating the correct disassembly and reassembly of components.

Component Relationships:

Visual representation of how different parts fit together within each system.

Level Of Detail:

Comprehensive, providing detailed illustrations and part numbers for all factory components. Does not typically include diagnostic procedures or torque specifications, which are found in a service manual.

📊 Manual Specifications

Format:

PDF

Readability:

Searchable text, zoomable images.

Printability:

Printable pages.

Binding:

N/A (Digital Download)

Paper:

N/A (Digital Download)

⚙️ Engine Specifications

Engine Family:

H1

Displacement:

Approx. 545cc (exact figures can vary slightly based on bore/stroke details within the H1 family).

Configuration:

Single-cylinder, liquid-cooled, 4-stroke

Bore X Stroke:

Typically around 92mm x 101.8mm (refer to specific service manual for precise figures).

Valve Train:

SOHC (Single Overhead Cam), 4 valves per cylinder

Horsepower:

Estimated 30-35 HP (at flywheel, typical for this displacement and class).

Torque:

Strong low-end torque for towing and climbing.

Induction:

Electronic Fuel Injection (EFI) with throttle body.

Fuel Type:

Unleaded gasoline

Fuel Capacity:

Typically around 5.0 gallons (19 liters).

🔧 Transmission

Type:

Automatic CV-Tech Transmission (CVT)

Drive Modes:

2WD/4WD with front differential lock.

Gear Selection:

High, Low, Neutral, Reverse, Park.

Engine Braking:

Engine braking provided by the CVT in lower gear ranges.

Clutch Type:

Variable ratio primary and secondary clutches with drive belt.

📐 Dimensions

Length:

Approx. 85 inches (2159 mm)

Width:

Approx. 48 inches (1219 mm)

Height:

Approx. 50 inches (1270 mm)

Wheelbase:

Approx. 50 inches (1270 mm)

Dry Weight:

Approx. 715 lbs (324 kg)

Ground Clearance:

Approx. 11 inches (279 mm)

Front Rack Capacity:

Approx. 100 lbs (45 kg)

Rear Rack Capacity:

Approx. 200 lbs (90 kg)

Towing Capacity:

Approx. 1050 lbs (476 kg)

Front Tire Size:

25 x 8-12

Rear Tire Size:

25 x 10-12

Wheel Type:

Typically steel wheels, GT model might have alloy options.

🛡️ Safety Features

Crash Test Data:

N/A for ATVs in the same way as passenger vehicles; focus on structural integrity and rider protection features.

Braking System:

Hydraulic disc brakes front and rear for reliable stopping power.

Lighting:

Halogen headlights, taillight, brake light for visibility.

Drivetrain Control:

Switchable 2WD/4WD with front differential lock for traction management.

Chassis Design:

Durable frame and bodywork designed to withstand off-road conditions.

Ergonomics:

Consideration for rider comfort and control, including handgrips and brake/throttle levers.

Passenger Safety:

Pillion seat with backrest and footpegs for secure passenger transport.

💡 Technology Features

Display:

Digital gauge cluster with speedometer, tachometer, odometer, trip meter, fuel level, and indicator lights.

Lighting Technology:

Halogen headlights for illumination.

Traction Control:

Switchable 2WD/4WD with electronic front differential lock engagement.

Charging Ports:

May include a 12V power outlet/accessory port for charging devices (check specific configuration).

🔧 Maintenance

Oil Change Engine:

Typically every 100 hours or annually (refer to specific service manual for exact interval and oil type).

Air Filter Cleaning:

Inspect and clean every 50 hours or as needed based on operating conditions.

Spark Plug Replacement:

Typically every 200 hours or annually.

Belt Inspection Cv Drive:

Inspect for wear and damage at 50-hour intervals; replacement based on wear.

Engine Oil Type:

SAE 5W-50 synthetic or semi-synthetic motorcycle/ATV oil meeting API SG or higher.

Engine Oil Capacity:

Approx. 2.5 quarts (2.4 liters) with filter change (refer to manual for exact capacity).

Coolant Type:

Ethylene glycol based antifreeze coolant (e.g., Arctic Cat Extreme Duty Coolant or equivalent).

Brake Fluid Type:

DOT 3 or DOT 4 hydraulic brake fluid.

Gearcase Oil Type:

Arctic Cat Synthetic Gear Lube or equivalent SAE 75W-90 gear oil.

Common Wear Items:

CV joint boots, drive belts, suspension bushings, wheel bearings due to off-road use.

Efi System:

Occasional issues with fuel pump or injectors can occur over time; regular fuel stabilizer use is recommended.

Electrical Connections:

Corrosion or loose connections in high-moisture environments can lead to intermittent electrical faults.

📚 Vehicle History

Manufacturer:

Arctic Cat (Textron Off Road)

Establishment:

Founded in 1960, with a long history in snowmobiles and later expanding into ATVs.

Trv Lineage:

The TRV series represents Arctic Cat's commitment to the two-up ATV segment, offering versatility and passenger comfort.

H1 Engine:

The H1 engine platform was a key development for Arctic Cat, providing a reliable and powerful powerplant for many of their ATV models.

Manufacturing Location:

Primarily manufactured in Thief River Falls, Minnesota, USA.

🏆 Awards & Recognition

Industry Awards:

Arctic Cat ATVs have historically received positive reviews for their performance and utility in various off-road publications.