Segment:
Mid-size utility ATV segment
Target User:
Recreational riders, utility users, hunters, farmers
Competitors:
Yamaha Kodiak 400, Suzuki KingQuad 400, Polaris Sportsman 400/500, Can-Am Outlander 400
Atv Features:
Capable off-road performance, utility features, likely 4WD, independent suspension, robust build
Benefit:
Enables owners and technicians to perform accurate maintenance, diagnostics, and repairs, extending vehicle life and ensuring optimal performance.
Engine:
Engine overhaul, diagnosis, specifications, torque values, timing, component testing
Transmission:
Transmission operation, repair, maintenance, fluid specifications, gear inspection
Fuel System:
Fuel pump, carburetor/fuel injection, fuel filter, fuel tank, lines, diagnosis
Lubrication System:
Oil pump, oil passages, oil filter, oil change procedures, lubrication points
Cooling System:
Radiator, coolant, water pump, thermostat, fan, hoses, flushing and filling procedures
Electrical System:
Wiring diagrams, battery, charging system (stator, regulator/rectifier), ignition system, starter, lighting, switches, sensors
Drive System:
Drive shafts, CV joints, differentials (front/rear), AWD system (if applicable), gearbox, U-joints
Steering System:
Handlebars, steering column, tie rods, steering rack/gearbox, bearings, alignment
Frame And Body:
Frame inspection, welds, body panels, plastics, mounting points, chassis components
Suspension:
Front and rear suspension arms, shock absorbers, springs, bushings, bearings, adjustment procedures
Braking System:
Brake levers, calipers, master cylinders, brake lines, brake pads, rotors, bleeding procedures
Wheels And Tires:
Tire pressures, specifications, wheel bearing maintenance, rim specifications
Maintenance:
Scheduled maintenance, oil changes, filter replacements, lubrication, spark plug checks, valve adjustments
Troubleshooting:
Diagnostic charts, symptom-based troubleshooting, electrical system diagnosis, engine performance issues
Repair:
Component removal and installation, engine rebuild, transmission overhaul, suspension repair, brake system repair
Diagnostics:
Electrical system diagnostics, fuel system diagnostics, ignition system diagnostics, mechanical component testing
Specifications:
Torque specifications for all fasteners, engine clearances, fluid capacities, electrical component specifications
Depth:
Factory-level detail for complete overhauls, diagnostics, and routine maintenance
User Level:
Suitable for experienced DIY mechanics, dealership technicians, and advanced enthusiasts
Engine Type:
4-stroke, Liquid-cooled, SOHC (Single Overhead Cam)
Displacement:
Approx. 375cc to 400cc (Specific to Arctic Cat 400 model variants)
Bore X Stroke:
Exact specifications to be found within the manual
Compression Ratio:
Exact specifications to be found within the manual
Power Output:
Typically in the range of 25-30 HP (Horsepower) (Specifics in manual)
Torque Output:
Specific Nm or lb-ft figures to be found within the manual
Fuel Delivery:
Likely Carbureted (Mikuni or Keihin) or Electronic Fuel Injection (EFI) depending on sub-model. Manual will detail either.
Fuel Type:
Unleaded gasoline
Fuel Capacity:
Typically around 3.5 - 4.5 gallons (Specifics in manual)
Oil Type:
SAE 10W-40 or 10W-50, API SG or higher (refer to manual for exact specifications and API rating)
Oil Capacity:
Approx. 2.0 - 2.5 liters (including filter) (Specifics in manual)
Coolant Type:
Ethylene glycol-based antifreeze (e.g., 50/50 mix with distilled water)
Coolant Capacity:
Approx. 1.5 - 2.0 liters (Specifics in manual)
Length:
Approximately 77-82 inches (Specifics in manual)
Width:
Approximately 45-48 inches (Specifics in manual)
Height:
Approximately 45-48 inches (Specifics in manual)
Dry Weight:
Approximately 550-600 lbs (Specifics in manual)
Ground Clearance:
Approximately 10-12 inches (Specifics in manual)
Rack Capacity Front:
Typically around 100 lbs (Specifics in manual)
Rack Capacity Rear:
Typically around 200 lbs (Specifics in manual)
Wheelbase:
Approximately 50-52 inches (Specifics in manual)
Towing Capacity:
Typically 1000-1500 lbs (Specifics in manual)
Oil Change Interval:
Typically every 100 hours or 6 months, whichever comes first (Refer to manual for exact interval)
Air Filter Cleaning:
Recommended to inspect every 20-40 hours of operation and clean/replace as needed, especially in dusty conditions (Manual will specify exact interval)
Spark Plug Replacement:
Typically every 200 hours or annually (Manual will specify)
Valve Adjustment:
Initial adjustment at break-in, then typically every 400-600 hours or as needed based on performance (Manual will specify)
Engine Oil Spec:
SAE 10W-40, API SG or higher (check manual for exact API rating)
Brake Fluid Spec:
DOT 3 or DOT 4 brake fluid (Manual will specify exact type)
Coolant Spec:
50/50 mixture of ethylene glycol antifreeze and distilled water
Grease Spec:
Lithium-based multi-purpose grease (refer to manual for specific NLGI grade)
Common Wear Items:
Brake pads, air filters, spark plugs, drive belts (CVT), suspension bushings, tie rod ends
Potential Weaknesses:
Early Arctic Cat ATVs sometimes experienced issues with electrical connectors and voltage regulators. CV joint boots can be prone to tearing if not properly maintained. (Manual will offer specific diagnostic advice)
Manufacturer:
Arctic Cat (Textron Specialized Vehicles)
Brand Focus:
Historically known for snowmobiles, expanded into ATVs and UTVs with a focus on performance and utility.
400 Series:
The 400 series has been a consistent offering in Arctic Cat's ATV lineup, evolving through different engine platforms and feature sets over the years.
Manufacturing Location:
Primarily manufactured in Thief River Falls, Minnesota, USA.
Model Range:
The 400 model has been produced across various years, with the 2014 model representing a specific iteration within this lineage.
