Product Type:
Service Repair Manual Download
Benefit 1:
Save money on repairs.
Benefit 2:
Easy-to-follow, step-by-step instructions.
Benefit 3:
Comprehensive coverage of all services and repairs.
Benefit 4:
Empowers users to perform repairs themselves.
Benefit 5:
Keeps users up-to-date with repair knowledge.
Engine:
Detailed repair procedures, overhaul specifications, troubleshooting for diesel engine.
Fuel System:
Inspection, adjustment, and repair of injection pump, injectors, and fuel lines.
Cooling System:
Radiator, thermostat, water pump, and coolant specifications.
Lubrication System:
Oil pump, filter, lubrication points, and oil change intervals.
Transmission:
Clutch, gearbox, final drive, and PTO repair and adjustment.
Hydraulic System:
Hydraulic pump, control valve, lift arms, and cylinder service.
Steering System:
Steering gears, tie rods, and wheel alignment.
Brake System:
Brake pedal, master cylinder, wheel cylinders, and brake band adjustment.
Electrical System:
Starter, generator/alternator, battery, lighting, and wiring diagrams.
Chassis And Frame:
Frame inspection, front axle, and rear axle service.
Body And Sheetmetal:
Fenders, hood, seat, and operator's platform.
Routine Maintenance:
Oil changes, filter replacements, lubrication, and inspections.
Troubleshooting:
Step-by-step diagnostic procedures for common and uncommon issues.
Engine Overhaul:
Complete engine disassembly, inspection, repair, and reassembly instructions.
Transmission Repair:
Gearbox disassembly, bearing replacement, and synchronizer repair.
Hydraulic System Service:
Pump seal replacement, valve adjustments, and cylinder resealing.
Electrical Diagnostics:
Wiring harness repair, component testing, and voltage checks.
Wheel Alignment:
Specifications and procedures for front wheel alignment.
Brake Adjustment:
Service and parking brake adjustment procedures.
Depth Level:
In-depth, professional quality, step-by-step instructions.
Visual Aids:
Includes pictures and wiring diagrams.
Engine Manufacturer:
Allis-Chalmers (likely built/specified)
Engine Model Code:
Specific model code not provided, but typically an in-house design or licensed engine.
Horsepower:
Approximately 45 PTO horsepower (WD45 general spec, diesel variant may vary slightly).
Torque:
Specific torque figures not provided in product description.
Injection System:
Direct injection, likely with CAV or Bosch components.
Wheelbase:
Approximately 84 inches (2134 mm).
Operating Weight:
Around 4,500 - 5,000 lbs (2041 - 2268 kg) without ballast.
Front Axle Weight:
Approx. 1,500 lbs (680 kg).
Rear Axle Weight:
Approx. 3,000 - 3,500 lbs (1361 - 1588 kg).
Engine Oil Change:
Typically every 40-50 hours of operation or annually, depending on duty cycle. Manual will specify.
Oil Filter Replacement:
At each oil change.
Air Filter Cleaning Or Replacement:
Frequent checks and cleaning recommended, especially in dusty conditions. Manual will provide specific intervals.
Transmission Oil Change:
Typically every 600-1000 hours. Manual will provide specific interval and fluid type.
Engine Oil:
API CD or equivalent diesel engine oil, viscosity grade determined by ambient temperature (e.g., SAE 10W-30, 15W-40). Consult manual for exact specification.
Transmission Hydraulic Fluid:
Allis-Chalmers THF or equivalent universal tractor transmission fluid (UTTO). Capacity approx. 5-6 gallons. Manual will specify.
Coolant:
Permanent type antifreeze, typically a 50/50 mix with distilled water. Manual will provide capacity and type.
Common Problem 1:
Hydraulic system leaks (e.g., worn seals in pump or cylinders).
Common Problem 2:
Clutch wear and adjustment issues.
Common Problem 3:
Engine starting problems in cold weather (glow plugs or compression).
Common Problem 4:
Brake band wear or adjustment.
Common Problem 5:
Electrical system component failures (starter, generator).
Manufacturer:
Allis-Chalmers was a significant American manufacturer of agricultural and construction equipment.
Predecessor:
Successor to the WD tractor.
Successor:
Part of the line leading to later Allis-Chalmers models.
Production Years:
The WD45 (gas/LP) was produced from 1953-1957. The WD45D diesel variant was introduced around 1955 and produced until the end of the WD45 line.
Manufacturing Location:
Likely manufactured in the United States by Allis-Chalmers.
