Value Proposition:
Offers professional-grade repair and maintenance information at a significantly lower cost than dealership or independent shop labor. Targets DIY enthusiasts and cost-conscious owners.
Target Audience:
Owners of 2017 Arctic Cat ATVs seeking to perform their own maintenance, repairs, and diagnostics, as well as those who want to understand their vehicle's systems in detail.
Differentiation:
Provides comprehensive factory-level documentation, including detailed electrical schematics and exploded views, covering multiple models and trims in a single PDF. Competes with official service manuals but offers greater accessibility and affordability.
Manual Benefits:
Empowers owners to perform their own maintenance and repairs, saving money, understanding their vehicle better, and ensuring longevity. Features detailed instructions and visual aids.
Major Systems:
• General Information/Specifications
• Periodic Maintenance
• Steering / Body / Controls
• Engine/Transmission
• Fuel/Lubrication/Cooling
• Electrical System
• Drive System/Brake System
• Suspension
Electrical System Detail:
Extensive coverage of the electrical system, including battery, charging system (stator, voltage regulator), starter motor, ignition system, lighting, and all electrical components with detailed wiring diagrams.
Suspension Systems:
Covers front and rear suspension components, including shocks, springs, control arms, ball joints, tie rods, and wheel bearings. Includes adjustment and replacement procedures.
Brake System:
Comprehensive coverage of hydraulic disc brake systems, including front and rear calipers, master cylinders, brake lines, and rotors.
Repair And Maintenance:
Step-by-step instructions for repairs and maintenance, including exploded views for clarity.
Troubleshooting Guides:
Comprehensive troubleshooting sections for common problems, allowing for systematic diagnosis and repair of mechanical and electrical issues.
Bodywork And Controls:
Detailed procedures for servicing body panels, seats, handlebars, levers, pedals, and all control cables and linkages.
Engine Component Service:
Detailed procedures for servicing engine components like pistons, connecting rods, crankshaft, cylinder head, valves, and camshafts.
Diagnostic And Repair Level:
Comprehensive, covering everything from basic maintenance to detailed repairs, including the electrical and wiring sections. Suitable for professional repair shops.
Engine Rebuild Procedures:
Detailed procedures for engine disassembly, inspection, repair, and reassembly, including torque specifications, clearances, and part tolerances for all major engine components.
Wiring Diagrams:
Extremely detailed and accurate wiring diagrams for all electrical circuits, essential for troubleshooting electrical faults.
Diagnostic Charts:
Includes symptom-to-cause diagnostic charts for a wide range of potential issues, facilitating efficient troubleshooting.
PDF Features:
Searchable text, viewable on PC, Mac, tablets, and smartphones. Printable.
Print Recommendation:
Printable for physical reference, allowing for on-site use during repairs.
Suggested Binding:
3-ring binder recommended for full manual printing.
Usage Consideration:
Print-on-demand functionality allows users to print only necessary pages, protecting the manual from grime during repairs.
Engine Variants:
Covers models with 500cc, 700cc, and 1000cc engine displacements. Specific engine architecture (e.g., SOHC, DOHC, fuel injected) will vary by model. The manual details these variations.
Engine Type And Configuration:
Typically single-cylinder, liquid-cooled, 4-stroke engines. Specific configurations (e.g., SOHC vs. DOHC) and bore/stroke dimensions are detailed per model.
Power And Torque:
The manual provides detailed specifications for horsepower and torque output for each engine variant, along with performance tuning guidelines and diagnostic procedures. Specific figures are model-dependent and detailed within the manual.
Fuel Delivery And Management:
Includes comprehensive information on fuel injection systems (EFI), throttle body assembly, fuel pump, injectors, fuel pressure testing, and related diagnostic procedures. Carbureted systems (if applicable to specific base models) are also detailed.
Engine Cooling System:
Detailed information on the liquid cooling system, including radiator, fan, thermostat, water pump, hoses, and coolant specifications and flush procedures.
Air Intake System:
Details on air filter servicing, intake manifold, and airbox configuration for optimal engine performance and longevity.
Transmission Type:
Automatic Continuously Variable Transmission (CVT) with engine braking. Specific variations like high/low ranges and reverse are covered.
Optional Transmissions:
Not applicable for this model year; all covered models utilize the CVT transmission.
Cv Features And Maintenance:
Details include CVT belt inspection and replacement, clutch assembly service (primary and secondary), gearcase lubrication, and troubleshooting for common CVT issues.
Drive System Details:
Covers front and rear differentials, driveshafts, CV joints, and axle maintenance. Includes specifications for differential fluid and lubrication.
Differential Lock:
Covers operation and maintenance of any differential lock systems (e.g., on MudPro models) if equipped.
Overall Dimensions:
Specific overall dimensions (length, width, height) will vary by model (e.g., TBX's utility focus). The manual contains detailed dimension charts and specifications for each model variant.
Wheelbase And Ground Clearance:
Specific wheelbase and ground clearance figures are critical for off-road performance and are detailed for each model variant within the manual.
Tire Sizes And Pressures:
Recommended tire sizes and inflation pressures for both front and rear wheels for optimal handling and performance across different terrains. Also includes wheel bolt pattern information.
Vehicle Weights:
Includes dry weight, curb weight, towing capacity, and payload capacity where applicable. These are critical for maintenance and operational safety and are detailed for each model.
Towing Capacity:
Specific towing capacities are provided for applicable models, crucial for safe and effective use of the ATV for hauling.
Safety Certifications:
While specific crash test ratings are not standard for ATVs, the manual covers safety-related components and procedures that contribute to safe operation, such as braking system maintenance and tire specifications.
Active Safety Systems:
Covers maintenance and operation of features like dynamic power steering (EPS), braking system components (hydraulic disc brakes), and lighting systems. Proper maintenance ensures these active safety features function as intended.
Braking System Diagnostics:
Detailed procedures for brake system maintenance, including bleeding, pad replacement, caliper service, rotor inspection, and master cylinder service.
Passive Safety Components:
Details on seat, handlebars, footwells, and protective bodywork maintenance are included, contributing to rider protection.
Infotainment Systems:
Basic onboard instrumentation typically includes speedometer, odometer, trip meter, fuel gauge, and warning lights. The manual details the function and maintenance of these displays.
Electronic Aids:
Covers the operation and diagnostics of Electronic Power Steering (EPS) systems, which enhance steering comfort and control, especially at lower speeds and on rough terrain.
Connectivity Features:
No advanced connectivity features are typical for this model year ATV; focus is on mechanical and electrical system diagnostics.
Recommended Maintenance Schedule:
Provides a detailed periodic maintenance schedule outlining recommended service intervals for oil changes, filter replacements, chain adjustments, clutch inspections, brake checks, and other essential upkeep tasks. Intervals are typically based on mileage or operating hours.
Specific Component Intervals:
Includes specific intervals for tasks like spark plug replacement, air filter cleaning/replacement, valve clearance checks (if applicable), and CVT belt inspection.
Brake Pad Inspection Interval:
Regular inspection recommended at intervals such as every 100 hours or 3,000 miles (or as per manual).
Lubricant And Coolant Requirements:
Specifies required engine oil types and viscosity grades (e.g., SAE 10W-40 Synthetic), gearcase oil specifications (e.g., Arctic Cat Synthetic Gear Lube), brake fluid type (DOT 4), and coolant type and mixture ratio. Includes capacities for all fluid reservoirs.
Engine Oil Recommendation:
Typically SAE 10W-40 Synthetic ATV Oil (verify specific API service classification with manual).
Gear Lube Specification:
Arctic Cat Synthetic Gear Lube or equivalent high-quality gear oil. Specific viscosity is detailed.
Common Wear And Tear:
While not explicitly listed as 'known issues' in a typical service manual, the comprehensive nature of the repair procedures and troubleshooting guides helps owners address common wear-and-tear items such as suspension bushings, wheel bearings, drive belts, and brake pads.
Common Maintenance Tasks:
Detailed instructions for tasks like fuel system cleaning, carburetor cleaning/adjustment (if applicable), battery maintenance, and tire pressure checks.
Arctic Cat Atv Legacy:
Arctic Cat has a long-standing history in powersports, known for its off-road capability and innovation in ATV design. This manual reflects that heritage for the 2017 model year.
2017 Lineup Overview:
The 2017 lineup represents an evolution of Arctic Cat's ATV platform, with specific enhancements to engine performance, suspension, and rider comfort across the 500, 700, and 1000cc models, including specialized variants like the TBX and MudPro.
