Target Audience:
Farm owners, mechanics, service technicians, Case IH enthusiasts
Value Proposition:
Comprehensive, factory-accurate information for self-service and repair, saving on professional labor costs.
Information Layout:
Organized with a table of contents for easy navigation and quick information retrieval.
Accessibility:
Downloadable for anytime, anywhere access on various digital devices.
Primary Coverage:
Service and Repair of Case IH 2394 Tractor
Secondary Coverage:
Troubleshooting, Maintenance, Wiring Diagrams
Estimated Page Count:
Comprehensive (specific page count not provided in product info, typical for factory manuals)
Type:
Factory Service Repair Manual
Primary Language:
English
Powertrain:
Engine, Transmission, Drivetrain
Hydraulic System:
Hydraulic pump, cylinders, control valves, PTO hydraulics
Electrical System:
Wiring diagrams, starter, alternator, lighting, instrumentation
Chassis And Steering:
Front axle, rear axle, steering system, brakes
Operator Station:
Controls, seating, cab systems (if applicable)
Fuel System:
Fuel tank, lines, filters, injection pump, injectors.
Exhaust System:
Exhaust manifold, muffler, tailpipe.
Cooling System:
Radiator, fan, water pump, thermostat, hoses.
Diagnostic Procedures:
Troubleshooting charts, symptom-based diagnostics
Repair Procedures:
Component removal, disassembly, reassembly, installation
Maintenance Procedures:
Lubrication schedules, filter changes, fluid checks and replacements
Adjustment Procedures:
Valve adjustments, clutch adjustments, brake adjustments
Engine Overhaul:
Detailed procedures for engine disassembly, inspection, and reassembly, including torque specifications and clearances.
Transmission Rebuild:
Instructions for gearbox, clutch pack, and hydraulic system overhaul for the powershift or gear transmissions.
Hydraulic System Testing:
Procedures for testing hydraulic pressure, flow rates, and diagnosing component malfunctions.
Electrical Troubleshooting:
Step-by-step guides for diagnosing electrical faults using wiring diagrams and multimeter testing.
Front Axle And Steering Repair:
Procedures for repairing steering linkages, kingpins, and differential assemblies.
Depth:
Comprehensive factory-level repair and overhaul information
Diagnostic Codes:
Troubleshooting guides often include specific error codes or fault indications for electronic control units (if equipped).
Engine Model:
Typically powered by Case IH 5.9L or 7.1L naturally aspirated or turbocharged diesel engines. Specific model varies, but commonly features the 504BDT (5.9L) or 8.3L (7.1L) series.
Horsepower Range:
Approximately 70-95 PTO horsepower (varies by specific engine option and configuration).
Torque Specifications:
Specific torque figures vary by engine model and configuration; refer to manual for exact details.
Injection System:
Mechanical or electronic fuel injection, depending on engine variant.
Cooling Type:
Liquid-cooled
Oil Type:
Refer to manual for specific SAE viscosity grade and API service classification (e.g., SAE 15W-40, API CG-4 or higher).
Air Cleaner:
Dry-type, cyclonic pre-cleaner common.
Transmission Type:
Powershift transmission (e.g., 16-speed forward/8-speed reverse) or synchronized gear transmission options.
Optional Transmission:
Creep drive, creeper transmission for very low speeds.
Pto Options:
Standard 540/1000 RPM PTO, often with independent PTO engagement.
Transmission Oil:
Refer to manual for specific fluid type and capacity (e.g., Case IH Hy-Tran Plus or equivalent).
Wheelbase:
Varies by configuration, typically around 95-100 inches (2413-2540 mm).
Length:
Varies by configuration, typically around 150-170 inches (3810-4318 mm).
Operating Weight:
Approximately 8,000 - 10,000 lbs (3629 - 4536 kg) without ballast.
Instrumentation:
Basic analog and digital gauges for engine RPM, oil pressure, coolant temperature, fuel level, and hour meter.
Pto Engagement:
Mechanical or hydraulic lever for PTO engagement.
Power Take Off:
Standard 540/1000 RPM PTO, often with a shiftable or independent engagement mechanism.
Engine Oil Change:
Typically every 250-500 hours of operation, refer to manual for precise interval.
Hydraulic Oil Change:
Typically every 500-1000 hours of operation, refer to manual.
Air Filter Replacement:
Replace when indicated by service indicator or visually inspected for clogging.
Hydraulic Fluid Type:
Case IH Hy-Tran Plus or approved equivalent (e.g., UTF - Universal Tractor Transmission Oil meeting specific specs).
Coolant Type:
Ethylene glycol-based antifreeze, typically a 50/50 mixture with distilled water.
Transmission Fluid Capacity:
Refer to manual for specific capacity (often around 15-20 gallons).
Common Wear Points:
Potential wear in transmission clutch packs, hydraulic pump components, and front axle kingpins. Refer to manual for specific diagnostic procedures.
Greasing Points:
Regular greasing of pivot points, steering components, and PTO shaft is crucial.
Manufacturer:
Case IH, a division of CNH Industrial, with a long history in agricultural machinery.
Legacy:
Case IH tractors are renowned for their durability and robust construction, a hallmark of the brand.
Series Placement:
Part of the Case IH 'Maxxum' or preceding tractor series, known for utility and power in medium-sized operations.
Production Years:
Likely produced in the late 1980s to early 1990s.
