Manual Authenticity:
Actual Genuine Factory Repair Manuals, not third-party.
Value Proposition:
Enables owners to perform their own servicing and repairs, saving significantly on labor costs.
Illustrations Diagrams:
Includes all necessary illustrations, drawings, and photos for clear guidance.
Instruction Format:
Step-by-step instructions with numbered steps, detailed substeps, notes, cautions, and warnings.
Usability:
Easy to use, allowing users to print only the pages needed or the entire manual.
Engine Service Repair:
Complete diagnostics, maintenance, and repair procedures for all engine options.
Transmission Service Repair:
Detailed procedures for automatic and manual transmissions, including diagnostics and overhaul.
Brake System:
Service, repair, and troubleshooting for ABS, disc and drum brakes, parking brake.
Wiring Diagram:
Comprehensive electrical schematics for all vehicle systems.
Electrical System:
Diagnosis and repair of all electrical components and circuits.
Suspension:
Front and rear suspension components, alignment, and repair.
Periodic Lubrication:
Recommended lubrication points and fluid types for all components.
Steering:
Power steering system diagnosis and repair, steering column components.
Cooling System:
Radiator, thermostat, water pump, hoses, and fan service.
Fuel Injection Fuel System:
Fuel pump, injectors, fuel filter, and fuel tank service.
Emission System:
Diagnosis and repair of emission control devices, OBD-II.
Heater Air Conditional:
HVAC system diagnosis, repair, and refrigerant handling.
Engine Control System:
ECM/PCM diagnostics, sensors, actuators, and ignition system.
Chassis Body:
Frame, body panels, doors, hinges, and glass service.
Restraint System:
Airbag system diagnostics, seatbelt service.
Interior:
Trim, seats, dashboard, and interior component removal/installation.
Differential Drive:
Front-wheel drive axle and differential service.
Axle:
Front axle components and service.
General Maintenance:
Routine checks, fluid changes, filter replacements, and basic tune-ups.
Troubleshooting:
Advanced diagnostic guides to identify and resolve common and complex problems.
Repair Procedures:
Step-by-step instructions for all repair and replacement tasks.
Rebuilds Restorations:
Detailed procedures for engine, transmission, and major component rebuilds.
Depth Of Information:
Comprehensive, covering everything from basic maintenance to advanced diagnostics and complete rebuilds.
Engine Options 2004 2006:
2.7L V6 (EER/EHD), 3.5L V6 (EGG/EGN)
2.7L V6 Horsepower Approx:
189 hp @ 5800 rpm
2.7L V6 Torque Approx:
190 lb-ft @ 4000 rpm
3.5L V6 Horsepower Approx:
200-225 hp @ 5800-6400 rpm (depending on model year and specific engine code)
3.5L V6 Torque Approx:
215-220 lb-ft @ 4000-4200 rpm (depending on model year and specific engine code)
Fuel Injection Type:
Sequential Multiport Fuel Injection (MPI)
NHTSA Front Crash Test Driver:
5 Stars (2004 Sebring Sedan)
NHTSA Front Crash Test Passenger:
5 Stars (2004 Sebring Sedan)
IIHS Front Offset Crash Test:
Good (for models tested during this period, generally well-rated for its class)
Anti Lock Brakes:
Standard on most trims.
Airbags:
Front airbags, available side airbags on some models.
Seatbelts:
Three-point seatbelts with pretensioners.
Oil Change Interval:
Every 3,000-5,000 miles or 6 months, depending on oil type and driving conditions (refer to manual for exact specification).
Engine Coolant Flush:
Every 30,000-50,000 miles or 3-4 years (refer to manual for exact specification).
Engine Oil Specification:
SAE 5W-30 synthetic blend or full synthetic (API Certified).
Power Steering Fluid:
Mopar Power Steering Fluid or equivalent.
Transmission Slippage:
Some 4-speed automatics (40TE/41TE) can experience slippage due to worn clutch packs or solenoid issues.
Timing Belt Replacement:
The 2.7L V6 uses a timing chain, while some 3.5L V6 engines may use a timing belt. Check specific engine for replacement intervals and procedures.
Window Regulator Failure:
Common issue on convertible models, leading to slow or non-functional power windows.
Suspension Component Wear:
Ball joints, tie rod ends, and bushings can wear over time, leading to clunking noises or poor handling.
Chrysler Legacy:
Chrysler has a long history of producing family sedans and coupes, with the Sebring nameplate evolving through various Chrysler models.
Second Generation Sebring:
The 2001-2006 Sebring represents the second generation, which saw a significant redesign and offered Sedan, Coupe, and Convertible body styles.
Manufacturing Location:
Sterling Heights, Michigan, USA.
