Segment:
Large Family Car / Executive Car
Usp:
Hydropneumatic suspension system offering superior ride comfort and handling balance.
Key Competitors:
Ford Mondeo, Opel Vectra, Volkswagen Passat, Peugeot 406, Renault Laguna, Fiat Croma.
Design Philosophy:
Focus on occupant comfort, innovative suspension, and aerodynamic styling.
Innovations:
Hydractive suspension, advanced safety features for its time, spacious and ergonomically designed interior.
Engine:
Petrol (e.g., XU7 JP, XU10 J2, XU10 J4) and Diesel (e.g., XUD7, XUD9, XUD11 A/B) engine overhauls, diagnostics, tuning, and component replacement.
Transmission:
Manual and Automatic transmission service, repair, and overhaul procedures, including clutch, gearbox, torque converter, and final drive.
Suspension:
Hydropneumatic suspension system (Hydractive/Hydractive 3) maintenance, repair, and component replacement, including spheres, pumps, fluid, and ride height control.
Brakes:
Front and rear brake systems, including discs, calipers, pads, hydraulic lines, ABS, and parking brake mechanisms.
Electrical:
Complete electrical system schematics, component testing, wiring diagrams, lighting, ignition, charging, starting systems, and electronic control units (ECUs).
Bodywork:
Body panel alignment, repair, rust prevention, door mechanisms, glass replacement, and interior trim.
HVAC:
Heating, Ventilation, and Air Conditioning (HVAC) system diagnostics and repair, including refrigerant handling, compressor, condenser, and evaporator.
Steering:
Power steering system diagnosis and repair, including pump, rack, and hydraulic lines.
Maintenance:
Scheduled maintenance tasks, oil changes, filter replacements, spark plug service, fluid checks and top-ups, belt replacements.
Troubleshooting:
Diagnostic procedures for common and uncommon faults, fault codes, symptoms, and recommended repair steps.
Repair:
Detailed step-by-step repair instructions for all major vehicle components and systems, including engine rebuilds, transmission overhauls, and suspension work.
Diagnostics:
On-board diagnostics (OBD) information and procedures for engine management and other electronic systems.
Rebuild:
Complete engine and transmission rebuild procedures, including specifications for tolerances and assembly.
Depth:
Advanced diagnostics, complete mechanical and electrical repair, system overhauls, and detailed component-level troubleshooting.
Petrol Options:
1.8L (XU7 JP), 2.0L (XU10 J2, XU10 J4), 2.0L Turbo (XU10 J4R), 2.0L V6 (ES9 J4). Specific engines like XU7 JP (1.8L 8V, 103 hp), XU10 J2 (2.0L 8V, 115 hp), XU10 J4 (2.0L 16V, 135 hp).
Diesel Options:
1.9L (XUD7, XUD9), 2.1L Turbo Diesel (XUD11 BTE). Specific engines like XUD7 (1.8L, 60 hp), XUD9 (1.9L, 71 hp), XUD11 BTE (2.1L Turbo, 110 hp).
Horsepower Range:
60 hp to 135 hp (naturally aspirated) and up to 110 hp for turbo diesel.
Torque Specifications:
Varies by engine; for example, the XUD11 BTE produces approximately 250 Nm (184 lb-ft) at 2000 rpm.
Petrol Injection:
Multi-point fuel injection (MPI) or single-point injection (SPI) depending on engine variant.
Diesel Injection:
Indirect injection (IDI) for naturally aspirated diesels, direct injection (DI) for turbo diesels.
Length:
Approx. 4640 mm (182.7 in)
Width:
Approx. 1760 mm (69.3 in)
Height:
Approx. 1370 mm (53.9 in) - without Hydractive system pressure
Wheelbase:
Approx. 2700 mm (106.3 in)
Boot Capacity:
Approx. 480 litres (16.9 cu ft) expandable to 800 litres (28.3 cu ft)
Curb Weight:
Approx. 1300-1500 kg (2866-3307 lbs) depending on engine and equipment.
Euro Ncap:
Not rated under current Euro NCAP protocols for this generation, but designed with substantial passive safety features.
ABS:
Anti-lock Braking System (ABS) available on higher trims and as an option.
Traction Control:
ASR (Anti-Slip Regulation) available on some models.
Airbags:
Driver airbag standard, passenger airbag available on later models and higher trims.
Body Structure:
Advanced crumple zones and reinforced passenger cell for crash energy absorption.
Audio System:
Factory-fitted radio/cassette or CD player, often with steering wheel controls on higher trims.
Display Technology:
Digital display for climate control and onboard computer (if equipped).
Cruise Control:
Available as an option on many variants.
Parking Sensors:
Rarely fitted on this generation, typically an aftermarket addition.
Bluetooth:
Not factory-equipped; requires aftermarket installation.
Onboard Computer:
Multi-function display showing fuel consumption, range, and service indicators on higher trims.
Oil Change Interval:
Typically every 10,000-15,000 km (6,000-9,000 miles) or 12 months, depending on oil type and driving conditions.
Timing Belt Replacement:
Crucial for interference engines (e.g., XU10J4, XUD11BTE), usually around 80,000-120,000 km (50,000-75,000 miles) or 5-7 years.
Engine Oil Petrol:
API SH/SJ or ACEA A2/A3, viscosity grades like 5W-40, 10W-40, or 10W-50.
Engine Oil Diesel:
API CF/CG-4 or ACEA B2/B3, viscosity grades like 10W-40 or 15W-40.
Hydropneumatic Fluid:
LHM Plus (Citroën's proprietary mineral hydraulic fluid, e.g., Total Fluide LDS or equivalent). Do NOT use DOT 3/4/5.
Coolant:
Ethylene glycol-based coolant with anti-corrosion additives. Usually a 50/50 mix with distilled water. Refer to manual for specific Citroën coolant type.
Suspension Spheres:
Degradation of gas pressure in suspension spheres can lead to a harsh ride or system failure.
Rear Suspension Height Regulator:
Wear in the height corrector unit can cause sagging rear suspension.
Electronically Controlled Manual Transmission:
Issues with the actuator or control unit on some automatic variants.
Radiator Fan Control:
Failure of the fan control module can lead to overheating.
Window Regulators:
Common wear issue with electric window mechanisms.
European Car Of The Year:
While not winning European Car of the Year itself, the Xantia was a strong contender and highly regarded for its comfort and innovation, contributing to Citroën's reputation.
Ride Comfort:
Consistently praised by automotive journalists for its exceptional ride quality, often compared favorably to luxury vehicles of the era.
Iso 9001:
Manufacturing processes adhere to automotive industry standards, often certified by ISO standards.
