Segment:
High-performance supermoto/naked sportbike.
Target Audience:
Enthusiast riders, DIY mechanics, professional motorcycle technicians.
Competitors:
KTM 1290 Super Duke R, Aprilia Dorsoduro 1200, BMW S1000R.
Usp:
Lightweight chassis, powerful V-twin engine, advanced electronics (for its time), premium Öhlins suspension (SP model).
Engine:
Disassembly, assembly, tuning, diagnostics, specific component repair (pistons, rings, valves, camshafts, crankshaft, lubrication system, cooling system).
Transmission:
Clutch operation, gearbox disassembly and assembly, shift mechanism, lubrication.
Fuel System:
Fuel injection system (throttle bodies, injectors, sensors), fuel pump, fuel tank, fuel lines, emissions control systems.
Electrical System:
Ignition system, starting system, charging system (alternator, regulator/rectifier), battery, lighting, instrumentation, ECU, wiring diagrams, fault finding.
Chassis And Suspension:
Frame, swingarm, front forks (Öhlins USD forks for SP model), rear shock absorber (Öhlins for SP model), steering head, wheel bearings, alignment.
Brakes:
Front and rear brake systems, caliper service, master cylinders, brake lines, ABS system (if equipped), bleeding procedures.
Bodywork:
Fairings, seat, fuel tank, fenders, graphics, plastics removal and installation.
Routine Maintenance:
Oil changes, filter replacements, chain adjustment and lubrication, spark plug replacement, air filter cleaning/replacement, valve clearance checks.
Troubleshooting:
Diagnostic procedures for common and uncommon issues, fault code interpretation, step-by-step problem resolution.
Repair Procedures:
Detailed instructions for engine rebuilds, transmission overhaul, suspension component servicing, electrical system repairs, brake system overhauls.
Special Tools:
Identification and use of Ducati-specific tools and equipment.
Diagnostic Capabilities:
Advanced diagnostic routines, sensor data interpretation, ECU flashing and parameter adjustment (where applicable in repair context).
Rebuild Instructions:
Complete engine and transmission rebuild procedures with torque specifications and clearances.
Schematics:
Detailed electrical wiring diagrams and component layouts.
Engine Type:
Desmodromic Testastretta 11° DS, L-Twin cylinder
Bore X Stroke:
81 mm x 64.5 mm
Compression Ratio:
12.5:1
Max Power:
110 hp (81 kW) @ 9,250 rpm
Max Torque:
65 lb-ft (88 Nm) @ 7,750 rpm
Fuel Delivery:
Marrelli electronic fuel injection, elliptical throttle bodies
Fuel Type:
Unleaded gasoline 95 RON
ABS:
Bosch ABS (2-channel) - typically standard on SP models
Traction Control:
Ducati Traction Control (DTC) - typically with multiple levels
Riding Modes:
Sport, Touring, Urban (influencing power delivery and DTC/ABS settings)
Lighting:
Halogen headlight, LED taillight, LED indicators
Oil Service:
Every 7,500 miles (12,000 km) or 12 months
Desmo Service:
Every 15,000 miles (24,000 km)
Engine Oil:
SAE 15W-50, API SN, JASO MA/MA2 (e.g., Shell Advance Ultra 15W-50)
Coolant:
Ethylene glycol-based coolant with anti-corrosion additives (e.g., Motorex Coolant M3.0)
Clutch Fluid:
Mineral oil (e.g., Ducati recommends specific mineral oil for hydraulic clutch)
Fork Oil:
Öhlins specific fork oil (e.g., Öhlins Synthetic 0W or 5W depending on adjustment)
Electrical Connections:
Potential for corrosion or loose connections in wiring harnesses, especially in humid conditions.
Desmodromic Actuation:
Requires precise maintenance; incorrect adjustment can lead to valve damage.
Clutch Actuator:
Occasional reports of leaks or stiff operation requiring service.
Engine Oil Drain Plug:
Refer to manual (typically around 30-40 Nm)
Wheel Axles:
Refer to manual (typically around 50-60 Nm for front, higher for rear)
Brand Focus:
Performance motorcycles, V-twin engines, Italian design and engineering.
Hypermotard Lineage:
Evolved from the original Hypermotard concept, focusing on aggressive styling and supermoto performance adapted for street use.
Sp Variant Distinction:
The 'SP' variant typically denotes higher-spec components such as Öhlins suspension, lighter wheels, and enhanced electronic features compared to the standard model.
Manufacturing Location:
Italy
