Brand Positioning:
Fendt is renowned for its high-performance, technologically advanced, and premium agricultural machinery.
Competitors:
Competes with other leading tractor manufacturers such as John Deere, Case IH, New Holland, and Claas in the high-horsepower segment.
Manual Advantage:
Provides Fendt-dealer level technical information, enabling owners and independent mechanics to perform complex repairs and maintenance accurately.
Value Proposition:
Cost savings on repair bills, extended vehicle lifespan, and optimized performance through proper maintenance and repair.
Engine Service:
Engine overhaul, diagnostics, component testing, fuel system, lubrication system, cooling system, exhaust system.
Drivetrain Service:
Vario transmission (ML 70/75, ML 80/85), hydraulic pump, final drives, differential locks, PTO (Power Take-Off).
Hydraulic System:
Hydraulic pump operation, control valves, lifting cylinders, auxiliary hydraulic circuits, hydraulic oil specifications, troubleshooting.
Electrical System:
Wiring diagrams, starter system, charging system, lighting, sensors, ECU (Engine Control Unit) diagnostics, CAN bus communication.
Chassis And Suspension:
Front axle, rear axle, braking system (service and parking brake), steering system, wheel hub maintenance.
Cab And Controls:
Operator station, HVAC (Heating, Ventilation, and Air Conditioning), control levers, safety features, operator comfort adjustments.
Maintenance Procedures:
Routine maintenance checks, lubrication points, filter replacement intervals, fluid level checks and top-ups, pre-delivery inspection (PDI).
Repair Procedures:
Step-by-step repair instructions for all major components, including engine rebuild, transmission overhaul, hydraulic system repair, and electrical troubleshooting.
Troubleshooting Guides:
Diagnostic flowcharts, common fault codes, symptom-based troubleshooting for engine, transmission, and hydraulic systems.
Technical Data And Specifications:
Torque specifications, clearance measurements, pressure readings, component dimensions, electrical resistance values.
Depth Of Information:
Comprehensive, covering basic maintenance to complete component rebuilds and advanced diagnostics, mirroring dealer-level resources.
PDF Quality:
High-resolution, clear text and images, suitable for printing and digital viewing.
Searchability:
Likely text-searchable, allowing for quick location of specific information.
Printable Pages:
All pages are printable on demand.
Digital Binding:
N/A (Digital PDF format)
Digital Paper Type:
N/A (Digital PDF format)
Engine Family:
Deutz TCD 2012 L06 2V / TCD 2013 L06 4V
712 Engine:
Deutz TCD 2012 L06 2V, approx. 110-120 kW (147-160 hp)
714 Engine:
Deutz TCD 2012 L06 2V, approx. 125-135 kW (168-181 hp)
716 Engine:
Deutz TCD 2013 L06 4V, approx. 140-150 kW (188-201 hp)
718 Engine:
Deutz TCD 2013 L06 4V, approx. 155-165 kW (208-221 hp)
818 Engine:
Deutz TCD 2013 L06 4V, approx. 170-180 kW (228-241 hp)
820 Engine:
Deutz TCD 2013 L06 4V, approx. 185-195 kW (248-261 hp)
Peak Torque:
Varies by model, generally in the range of 600-1000 Nm, often with an overboost function.
Emission Standard:
COM3 (Common Rail Stage III A)
Injection System:
Common Rail direct injection with electronic control.
Turbocharging:
Turbocharged with intercooler.
Engine Oil Type:
Refer to manual for specific API/ACEA classifications (e.g., ACEA E4/E6/E7) and SAE viscosity grades (e.g., 10W-40, 15W-40) based on ambient temperature.
Engine Oil Capacity:
Approximately 20-25 liters (depending on model and oil filter).
Cooling System Capacity:
Approximately 30-35 liters (including expansion tank).
Transmission Type:
Fendt Vario Continuously Variable Transmission (CVT).
Transmission Models:
ML 70, ML 75 (for 700 series), ML 80, ML 85 (for 800 series).
Transmission Features:
Infinitely variable speed control, forward/reverse shuttle, engine-transmission management (ETM), cruise control.
Transmission Fluid Type:
Special Fendt Vario transmission fluid (refer to manual for specific part numbers and specifications, e.g., AGCO Fluid 821 XL or equivalent).
Transmission Fluid Capacity:
Approximately 20-25 liters (depending on specific Vario gearbox model).
Overall Length:
Varies by model, typically around 4.5-5.5 meters.
Overall Width:
Varies by model, often around 2.5 meters (standard transport width).
Overall Height:
Varies by model and cab configuration, typically around 3.0-3.3 meters.
Unladen Weight:
Varies significantly by model, generally between 7,000 - 10,000 kg.
Gross Vehicle Weight:
Can exceed 12,000 kg, depending on configuration and ballast.
Rollover Protection:
Standard ROPS (Roll-Over Protective Structure) cab.
Braking System:
Hydraulic dual-circuit brakes, independent parking brake, optional trailer brake systems.
Lighting:
Full road lighting, work lights (front and rear), warning beacons (optional).
Cab Safety:
Reinforced safety cab, seat belts, emergency exits, operator presence system.
Cab Features:
While primarily work machines, Fendt cabs of this era often featured advanced climate control, ergonomic controls, and basic radio/CD players.
Fendt Vario Technology:
The core technology is the Vario transmission, offering seamless acceleration and deceleration, optimizing engine RPM for fuel efficiency and performance.
Control Systems:
Variotronic control system for integrated management of tractor functions, implements, and GPS guidance (optional).
Telematics Options:
Optional telematics systems for remote diagnostics and machine monitoring might have been available, depending on configuration.
Engine Oil Change Interval:
Typically 500 or 600 operating hours, depending on operating conditions and oil type used. Refer to manual for precise intervals.
Transmission Oil Change Interval:
Typically 1000 or 1200 operating hours for Vario transmission fluid. Consult the manual for exact intervals and specific service points.
Hydraulic Oil Change Interval:
Typically 1000 or 1200 operating hours for hydraulic fluid. Refer to manual for detailed service schedule.
Air Filter Replacement:
Inspect every 250 hours, replace as needed based on dust indicator or annually.
Hydraulic Oil Type:
Refer to manual for specific AGMA or ISO viscosity grades and approved manufacturers. Often a specialized hydraulic oil is required.
Hydraulic System Capacity:
Approximately 80-120 liters (depending on PTO and implement connections).
Common Wear Items:
Hydraulic pumps, Vario transmission wear plates (if not maintained correctly), clutch packs (in PTO/wheel drives), sensors, and electronic control units.
Maintenance Impact:
Strict adherence to Fendt's recommended service intervals and fluid types is critical for the longevity and reliable operation of the Vario transmission and advanced hydraulic systems.
Brand Origin:
Fendt is a German manufacturer with a long-standing reputation for innovation and quality in agricultural machinery, founded in 1937.
Vario Introduction:
The Vario transmission, a hallmark of Fendt, was pioneered in the mid-1990s, revolutionizing tractor technology with its continuously variable capabilities.
Manufacturing Location:
Primarily manufactured in Marktoberdorf, Bavaria, Germany.
Approximate Production Years:
The COM3 variants of the 700 and 800 Vario series were typically produced from the mid-2000s to early 2010s, before the introduction of Stage III B (Tier 4i) engines.
