Engine:
3.0L Duratec V6 (200hp @ 6000 rpm, 200 lb-ft @ 4000 rpm), including disassembly, assembly, diagnosis, and repair of all internal and external components.
Transmission:
6-speed Automatic (AX4N/4F50N derivative), including shift control, torque converter, valve body, internal component repair, and fluid specifications.
Drivetrain:
Front-Wheel Drive (FWD) and All-Wheel Drive (AWD) systems, including half-shafts, CV joints, differential components, and AWD coupling unit.
Suspension:
Front MacPherson struts with stabilizer bar, Rear independent multi-link suspension, including component replacement, alignment specifications, and shock/strut service.
Brakes:
Front vented discs, Rear solid discs. ABS, EBD, Traction Control system diagnosis and repair, including caliper, rotor, brake line, and master cylinder service.
Steering:
Power-assisted rack and pinion, including steering column, intermediate shaft, tie rods, and power steering pump/rack diagnosis.
Electrical:
Complete wiring diagrams, fuse box layouts, starter, alternator, battery, lighting systems, power windows, locks, mirrors, wipers, horn, and accessory circuits.
HVAC:
Air conditioning system diagnosis and repair, heater core, blower motor, evaporator, refrigerant handling, and climate control module.
Body:
Exterior panels, doors, hood, tailgate, bumpers, glass, interior trim, seats, and body structural components.
Diagnostics:
On-Board Diagnostics (OBD-II) system, diagnostic trouble codes (DTCs), scan tool procedures, and troubleshooting flowcharts for common issues.
Maintenance:
Oil changes, filter replacements (oil, air, cabin), spark plug service, fluid checks and flushes (coolant, brake, power steering, transmission), tire rotation, and battery maintenance.
Repair:
Engine component replacement (pistons, rings, bearings, valves, camshafts), head gasket replacement, transmission rebuilds, brake caliper/rotor replacement, CV joint replacement, suspension arm/bushings, exhaust system repair, and electrical component diagnosis/replacement.
Troubleshooting:
Systematic diagnosis of drivability issues, starting problems, charging system faults, cooling system leaks, braking performance degradation, electrical malfunctions, and HVAC system failures.
Technical Specifications:
Torque specifications for all fasteners, engine timing procedures, diagnostic scan tool data interpretation, wiring schematic analysis, and component identification.
Depth:
Comprehensive. Covers basic maintenance to full engine and transmission rebuilds, including detailed diagnostic procedures and wiring diagrams.
Oil Change:
Every 5,000 miles (8,000 km) or 6 months, whichever comes first, with synthetic blend or full synthetic oil.
Air Filter Replacement:
Every 30,000 miles (48,000 km) or 24 months.
Cabin Filter Replacement:
Every 15,000 miles (24,000 km) or 12 months.
Spark Plugs:
Every 100,000 miles (160,000 km) for iridium-tipped spark plugs.
Transmission Fluid Flush:
Recommended every 60,000 miles (96,000 km) under normal driving conditions, or sooner for severe service.
Engine Oil:
SAE 5W-20, API SN/SN+ or newer.
Coolant:
Ford Premium Engine Coolant (Green) or equivalent meeting specification WSS-M97B44-D.
Power Steering Fluid:
MERCON® ATF or equivalent.
Engine Mounts:
Premature wear and failure of engine mounts, leading to vibration and noise.
Transmission Shifting:
Occasional harsh shifting or delayed engagement, often related to valve body wear or solenoid issues.
Cv Joints:
Front CV joint boots can split, leading to grease loss and joint failure.
Rear Suspension:
Wear in rear suspension bushings can lead to knocking noises and degraded handling.