Market Segment:
Competition / Off-Road Motorcycles (Dual-Sport/Enduro)
Competitors 2010:
KTM EXC series, Yamaha WR series, Honda CRF-X series, Suzuki RMX series, Kawasaki KX-F series.
Vehicle Focus:
The TXC series from Husqvarna is known for its performance-oriented design, catering to riders seeking capability in both trail riding and competition. The 2010 models represent an evolution of Husqvarna's off-road prowess.
Manual Advantage:
Provides owners and technicians with the essential technical knowledge and step-by-step procedures to maintain, diagnose, and repair their 2010 Husqvarna TXC450/TXC510 effectively, saving time and money.
Coverage Scope:
Comprehensive service and repair coverage for Husqvarna TXC450 and TXC510 models.
Page Count:
Estimating 200-300 pages based on typical Husqvarna service manuals for this era. Exact count unavailable from provided data.
Manual Type:
Service Manual / Repair Manual
Language:
English (Presumed based on product description phrasing)
Engine Service:
Detailed procedures for engine disassembly, inspection, reassembly, including top-end and bottom-end components. Covers valve adjustment, piston/ring replacement, crankshaft and connecting rod service.
Fuel System:
Diagnosis and repair of fuel injection system, fuel pump, injectors, throttle body, and fuel tank. Includes component testing and pressure specifications.
Ignition System:
Information on ignition coil, spark plug, and ECU testing and troubleshooting. Timing specifications where applicable.
Cooling System:
Radiator, water pump, thermostat, and coolant hose inspection and service. Bleeding procedures and coolant specifications.
Transmission Drivetrain:
Clutch inspection and adjustment, gearbox disassembly and reassembly, gear inspection, and final drive (chain and sprockets) maintenance. Lubrication specifications.
Suspension System:
Front fork and rear shock absorber service, including seal replacement, oil levels, and damping adjustments. Swingarm and linkage bearing maintenance.
Brake System:
Front and rear brake caliper service, master cylinder overhaul, brake pad replacement, fluid bleeding, and hydraulic line inspection. Disc rotor specifications.
Electrical System:
Wiring diagrams, starter motor service, battery maintenance, lighting system diagnosis, and fuse/relay identification. ECU troubleshooting.
Chassis Frame:
Frame inspection, steering head bearing service, and general chassis component inspection.
Bodywork:
Fairing removal and installation, seat service, and other body panel components.
Scheduled Maintenance:
Detailed service intervals for oil changes, filter replacements, chain lubrication, valve clearance checks, and other routine upkeep.
Troubleshooting Guide:
Diagnostic flowcharts and symptom-based troubleshooting for common operational issues.
Disassembly Reassembly:
Step-by-step instructions for component removal and installation with torque specifications.
Torque Specifications:
Critical torque values for all fasteners and internal engine components.
Special Tools:
Identification of required special tools for specific repair procedures.
Depth Level:
Comprehensive: Covers everything from basic fluid changes and adjustments to full engine rebuilds, suspension overhauls, and electrical system diagnostics.
File Format:
PDF (Portable Document Format)
Print Quality:
High resolution for clear text and diagrams. Assumed to be professional quality digital reproduction.
Binding Type:
N/A (Digital PDF format)
Paper Type:
N/A (Digital PDF format)
Searchability:
Likely text-searchable PDF for quick information retrieval.
Illustrations:
Includes detailed diagrams, exploded views, and illustrations of components and procedures.
Engine Type:
Four-stroke, Single-cylinder
Displacement Txc450:
449.5 cc (Approx.)
Bore Stroke Txc450:
97 mm x 60.8 mm (Approx.)
Cooling System Txc450:
Liquid-cooled
Valve Train Txc450:
DOHC, 4 valves
Engine Type:
Four-stroke, Single-cylinder
Displacement Txc510:
501 cc (Approx.)
Bore Stroke Txc510:
97 mm x 67.8 mm (Approx.)
Cooling System Txc510:
Liquid-cooled
Valve Train Txc510:
DOHC, 4 valves
Horsepower Txc450:
Estimated 50-55 HP (Stock, highly dependent on tuning and exhaust, specific data not provided in product info)
Horsepower Txc510:
Estimated 55-60 HP (Stock, highly dependent on tuning and exhaust, specific data not provided in product info)
Fuel Delivery:
Electronic Fuel Injection (EFI) - Keihin FCR MX or similar (specific model may vary, manual will detail exact system)
Fuel Type:
Unleaded gasoline, minimum 90 octane
Oil Type:
High-performance motorcycle specific 4-stroke engine oil, SAE 10W-50 or 15W-50 recommended (manual will specify exact API classification and JASO standard).
Transmission Type:
6-speed constant mesh
Optional Gear Ratios:
N/A (Typically fixed ratios per model, but manual may cover aftermarket options or variations)
Clutch Type:
Wet, multi-plate, hydraulic activation
Final Drive:
Sealed O-ring chain, 520 pitch (Specific sprocket sizes will be detailed in manual)
Transmission Oil Type:
Dedicated motorcycle transmission oil or engine oil as specified by manufacturer (manual will clarify).
Wheelbase:
Approximately 1490 mm - 1510 mm (will vary slightly between 450 and 510, manual will confirm precise figure).
Seat Height:
Approximately 950 mm - 970 mm (will vary slightly, manual will confirm precise figure).
Dry Weight Txc450:
Approximately 107 kg (114 kg claimed wet weight for some variations, manual will clarify)
Dry Weight Txc510:
Approximately 108 kg (115 kg claimed wet weight for some variations, manual will clarify)
Fuel Tank Capacity:
Approximately 7.5 - 8.5 Liters (Manual will confirm exact capacity and reserve)
Crash Safety Ratings:
N/A (Motorcycles are not subjected to the same crash testing standards as cars).
Braking System:
Hydraulic disc brakes front and rear. Braided steel lines likely standard for improved feel and durability.
Suspension Performance:
Performance-oriented suspension (e.g., Marzocchi USD front forks, Sachs or Kayaba rear shock) designed for off-road terrain control and rider confidence.
Lighting System:
Headlight, tail light/brake light, turn signals (may vary by market/homologation, manual will specify wiring for all).
Engine Oil Change:
Every 10-15 hours of operation or monthly, whichever comes first (typical for off-road use; manual will provide precise hours/mileage).
Air Filter Cleaning:
Every 5-10 hours or after dusty riding conditions (manual will detail cleaning and oiling procedure).
Valve Clearance Check:
Every 20-30 hours of operation (critical for engine health; manual provides exact range and adjustment procedure).
Chain Lubrication Adjustment:
Every 5-10 hours of operation or before/after extended rides.
Engine Oil Capacity:
Approximately 1.1 - 1.3 Liters (Manual will confirm exact capacity and filter type/part number).
Coolant Type:
Ethylene glycol based, permanent type antifreeze (manual will specify concentration and manufacturer recommendations).
Brake Fluid Type:
DOT 4 hydraulic brake fluid (Manual will specify for both front and rear systems).
Common Wear Items:
Clutch plates, brake pads, sprockets, chain, fork seals, and wheel bearings are typical wear items for off-road motorcycles of this era. Manual provides inspection criteria.
Potential Engine Considerations:
Valve adjustment adherence is crucial to prevent premature wear or damage. Clutch basket wear can occur with aggressive use. Manual addresses these.
Electrical System Considerations:
Corrosion on connectors or grounding points can lead to intermittent issues. Manual's wiring diagrams are essential for diagnosis.
Brand Legacy:
Husqvarna Motorcycles is one of the oldest motorcycle manufacturers in the world, founded in Sweden in 1689. Known for its off-road racing heritage and innovative designs.
Txc Lineage:
The TXC line represents Husqvarna's commitment to the dual-sport and enduro market, building on decades of experience in motocross and off-road racing. The 2010 models likely saw updates in engine management, suspension, and chassis geometry.
Manufacturing Location:
Italy (Under the ownership of BMW Motorrad at the time of 2010 production).
