Category:
Agricultural Tractor
Key Competitors:
Fordson, Massey Ferguson, John Deere, David Brown (during its production era).
Manual Advantage:
Enables DIY repairs, reduces labor costs, provides professional-level diagnostic information.
Delivery Benefit:
Instant download eliminates shipping costs and wait times.
Primary Focus:
Repair, maintenance, and overhaul procedures for the International Harvester 364 Tractor.
Target Audience:
Professional technicians and DIY mechanics.
Estimated Pages:
Hundreds (typical for comprehensive tractor workshop manuals).
Type:
Workshop Service Manual / Repair Manual
Delivery Method:
Instant Download
Engine:
Detailed overhaul, repair, and maintenance procedures, including diagnostics and adjustments.
Fuel System:
Carburetor/injector pump service, fuel filter replacement, fuel line troubleshooting.
Cooling System:
Radiator, thermostat, water pump, coolant specifications and service.
Ignition System:
Spark plug service, distributor, ignition timing (if applicable).
Transmission:
Gearbox overhaul, clutch service, PTO operation and repair.
Hydraulic System:
Hydraulic pump, control valves, cylinders, fluid specifications and maintenance.
Steering System:
Steering box, linkage, and power steering service (if equipped).
Brake System:
Brake adjustments, fluid specifications, component replacement.
Electrical System:
Wiring diagrams, starter, alternator, lighting, battery service.
Chassis And Suspension:
Front axle, rear axle, kingpins, lubrication points.
Bodywork And Frame:
Sheet metal repair, mounting points, operator station.
Power Steering:
Details on hydraulic power steering system (if equipped) including pump, reservoir, steering cylinder, and associated lines and valves.
Maintenance:
Periodic maintenance charts, lubrication schedules, filter replacement.
Repair:
Step-by-step instructions for component repair and replacement.
Overhaul:
Comprehensive procedures for complete engine, transmission, and hydraulic system rebuilds.
Troubleshooting:
Diagnostic guides for identifying and resolving common operational problems.
Adjustments:
Detailed procedures for setting engine timing, valve clearance, clutch engagement, etc.
Depth:
Full workshop level, covering everything from basic maintenance to complete component rebuilds and diagnostics.
Diagnostic Tools Required:
Basic mechanic's tools, multimeter for electrical diagnostics, possibly a compression tester and fuel pressure gauge. Manual will detail specific tools for certain tasks.
Engine Type:
Likely diesel engine. Specific engine model and configuration not provided in product description, but typically a 3 or 4-cylinder diesel for this class.
Horsepower Range:
Typically in the 40-55 HP range (specifics vary by engine option).
Torque Range:
Torque specifications will be detailed within the manual, crucial for heavy draft work.
Injection Type:
Likely direct injection or indirect injection (details in manual).
Cooling Medium:
Water/Antifreeze mixture.
Oil Type:
Specific diesel engine oil viscosity (e.g., SAE 15W-40) will be detailed in the manual.
Engine Identification:
Specific engine model numbers (e.g., BD-154, AD-201) would be found on the engine block and detailed in the manual.
Gearbox Type:
Likely a constant mesh or synchromesh manual transmission.
Gear Configuration:
Multiple forward gears and reverse gears (e.g., 8 forward, 2 reverse is common for this class).
Additional Gearbox Options:
Optional creeper gears or specialized transmissions might have been available, detailed in the manual.
Pto System:
Standard PTO (Power Take-Off) operation, speeds, and maintenance will be covered.
Clutch Type:
Likely a dry single-plate clutch.
Transmission Oil Type:
Specific hydraulic/transmission fluid (e.g., IH Hy-Tran or equivalent) will be specified.
Overall Length:
Approximate dimensions will be in the manual, crucial for storage and transport.
Overall Width:
Approximate dimensions will be in the manual, relevant for fieldwork and transport.
Operating Weight:
Operating weight will be specified, important for transport regulations and axle load considerations.
Drawbar Pull Capacity:
The manual will detail the tractor's pulling capabilities.
Safety Standards:
The manual will likely reference relevant safety standards for tractor operation and maintenance applicable at the time of manufacture.
Operator Safety:
Emphasis on safe operating procedures, lockout/tagout for maintenance, and proper use of safety guards.
Rollover Protection:
ROPS (Roll Over Protective Structure) compatibility and installation instructions may be included if available as an option or aftermarket.
Features:
Basic operator instrumentation (tachometer, temperature gauge, oil pressure warning light, ammeter). No modern infotainment systems.
Features:
Mechanical controls, no electronic driver assistance systems.
Features:
No electronic connectivity features.
Engine Oil Change:
Typically every 100-250 operating hours, as detailed in the manual.
Air Filter Service:
Regular checks and replacement/cleaning based on operating conditions, specified in manual.
Fuel Filter Replacement:
Scheduled replacement intervals (e.g., annually or every 250 hours) will be in the manual.
Hydraulic Fluid Change:
Typically every 500-1000 operating hours or annually, as per manual recommendations.
Engine Oil Grade:
Likely API CD or CE rated diesel engine oil, SAE 15W-40 or 30 depending on ambient temperature (manual specific).
Transmission Hydraulic Fluid:
International Harvester Hy-Tran fluid or equivalent, critical for hydraulic and transmission life (manual specific).
Coolant Type:
Ethylene Glycol based antifreeze with corrosion inhibitors, typically a 50/50 mix with distilled water.
Grease Type:
General purpose lithium-based grease for lubrication points.
Common Wear Points:
Clutch wear, hydraulic system leaks, potential engine wear due to hours of operation, PTO clutch engagement issues.
Electrical System Quirks:
Aging wiring harnesses can lead to intermittent electrical faults. Manual's wiring diagrams are essential.
Industry Awards:
While specific awards for the 364 model are not widely documented, International Harvester tractors were generally well-regarded for their robustness and reliability during their era.
User Reviews:
User feedback for the 364 typically highlights its sturdy build, straightforward mechanics, and good pulling power for its size, though maintenance is key.
