Engine Service Repair:
Comprehensive overhaul, diagnostics, tune-up procedures, internal component repair (pistons, rings, bearings, valves, camshafts, etc.)
Transmission Service Repair:
Detailed procedures for both automatic and manual transmissions, including disassembly, assembly, adjustments, and troubleshooting.
Brake System:
Disc and drum brake system repair, hydraulic components, parking brake, bleeding procedures.
Wiring Diagrams:
Complete electrical system wiring diagrams for all circuits and components.
Electrical System:
Diagnosis and repair of starters, alternators, ignition systems, lighting, accessories, and control modules.
Suspension:
Front and rear suspension component repair, alignment specifications, shock absorbers, springs, bushings.
Steering:
Power steering system diagnosis and repair, steering linkage, steering column, steering gear.
Cooling System:
Radiator, water pump, thermostat, cooling fan, hoses, coolant specifications and flushing procedures.
Fuel Injection Fuel System:
Fuel pump, fuel filter, carburetor (if applicable) or early fuel injection system diagnostics and repair, fuel lines.
Emission System:
Emission control devices, catalytic converter, EGR system, troubleshooting emission-related issues.
Heater Air Conditional:
HVAC system components, blower motor, heater core, A/C system (if equipped) diagnosis and repair.
Engine Control System:
Early electronic engine control units (ECUs) and associated sensors and actuators.
Chassis Body:
Frame inspection, body panel repair, doors, windows, latches, hinges, exhaust system.
Interior:
Seating, dashboard, trim panels, carpeting, sound deadening.
Differential Drive:
Front and rear differential service, gear ratios, lubrication, propeller shafts, U-joints.
Axle:
Front and rear axle assemblies, hub assemblies, bearings.
General Maintenance:
Routine checks, fluid changes, filter replacements, lubrication points.
Periodic Lubrication:
Detailed lubrication schedule for all chassis and driveline components.
Repair Procedures:
Step-by-step instructions for all repair operations, including disassembly, cleaning, inspection, assembly, and reinstallation.
Troubleshooting:
Systematic diagnostic procedures for identifying and resolving common and uncommon vehicle issues.
Diagnostic Information:
Procedures and specifications for diagnosing system faults, including electrical troubleshooting.
Maintenance Schedules:
Recommended maintenance intervals for all major vehicle systems.
Technical Specifications:
Torque values, clearances, fluid capacities, electrical resistance values, and other critical data.
Illustrations Diagrams:
Hundreds of detailed illustrations, diagrams, and photographs to guide repairs.
Tool Requirements:
Information on required special tools and standard tools for each procedure.
Depth:
Comprehensive (from basic maintenance to full engine and transmission rebuilds, advanced electrical diagnostics).
Oil Change Interval:
Typically every 3,000 to 5,000 miles (4,800 to 8,000 km) or 6 months, depending on driving conditions.
Tune Up Interval:
Recommended every 20,000 to 30,000 miles (32,000 to 48,000 km) for spark plugs, distributor, etc.
Engine Oil Type Capacity:
API SF or SG, SAE 10W-30 or 10W-40 recommended. Capacity around 5 quarts (4.7 liters) with filter, consult manual for exact spec.
Transmission Fluid Type:
ATF+3 or Dexron II for automatic transmissions; gear oil for manual transmissions (specific viscosity depends on application).
Coolant Type:
Ethylene Glycol based antifreeze, typically a 50/50 mix with distilled water.
Common Problems:
Rust issues (especially wheel wells, rocker panels, tailgate), carburetor tuning problems, power steering leaks, aging rubber components (hoses, bushings), electrical system quirks.
