Engine:
Complete engine disassembly, assembly, tuning, internal components (pistons, crankshaft, camshafts, valves, timing, lubrication, cooling).
Transmission:
Clutch, shift mechanism, internal transmission components, service and repair procedures.
Chassis And Frame:
Frame, fork, triple clamp, handlebar, controls, shock absorber, swingarm, wheels, exhaust, air filter, fuel tank, seat, trim, mask, fender.
Electrical System:
Wiring harness, battery, ignition system, electric starter, lighting system, instruments, wiring diagrams.
Braking System:
Complete brake system diagnostics, repair, and maintenance.
Fuel System:
Fuel tank, carburetor, fuel pump (if applicable), fuel system maintenance and troubleshooting.
Cooling System:
Water pump, cooling system maintenance, fluid specifications, repair.
Engine Management:
Details on engine control unit (ECU) functions, sensor inputs, and actuator outputs, crucial for modern fuel-injected engines.
Maintenance:
Scheduled maintenance, fluid changes, filter replacements, lubrication.
Repair:
Step-by-step instructions for component repair and replacement, including full disassembly and reassembly.
Troubleshooting:
Diagnostic procedures for common and complex issues.
Technical Data:
Specifications for all major components and systems.
Safety Information:
Safety advice, warnings, and precautions.
Special Tools:
Identification and usage of specialized tools required for specific procedures.
Carburetor Section:
Detailed coverage of carburetor systems, including cleaning, adjustment, and overhaul.
Exhaust Control Section:
Information on exhaust systems, potentially including control mechanisms or removal/installation procedures.
Ignition System Section:
Detailed procedures for diagnosing and repairing the ignition system, including spark plugs, coils, and ignition control units.
Electric Starter Section:
Troubleshooting and repair of the electric starter motor and associated circuitry.
Cleaning Protective Treatment Section:
Guidance on cleaning procedures and protective treatments for various components.
Storage Section:
Instructions for proper vehicle storage.
Wiring Diagrams Section:
Comprehensive and detailed wiring diagrams essential for electrical diagnostics and repairs.
Substances Auxiliary Substances Section:
Information on required lubricants, fluids, sealants, and other auxiliary substances.
Depth:
Complete factory level detail, suitable for both DIY enthusiasts and experienced mechanics.
Diagnostic Capabilities:
Includes troubleshooting guides and step-by-step diagnostic procedures for a wide range of issues.
Rebuild Procedures:
Covers complete disassembly, overhaul, and reassembly of major components like the engine and transmission.
Engine Type:
V-Twin Cylinder, 4-stroke, Liquid Cooled
Bore X Stroke:
105mm x 69mm
Compression Ratio:
13.0:1
Power Output:
Approx. 148 hp (109 kW) at 8,500 rpm
Torque:
Approx. 125 Nm (92 lb-ft) at 6,500 rpm
Fuel Delivery:
Fuel injection ( EFI ) with throttle body
Fuel Type:
Unleaded gasoline, minimum Octane rating of 95 RON
Oil Type:
Fully synthetic engine oil, SAE 10W/50 or 15W/50, meeting JASO MA or MA2 specifications.
Coolant Type:
Mixture of water and antifreeze (e.g., Motorex Coolant M3.0) with corrosion inhibitors, typically a 50/50 mix.
Oil Change:
Typically every 10,000 km (6,200 miles) or annually, whichever comes first. (Manual will specify exact intervals).
Valve Clearance:
Typically at 20,000 km (12,400 miles). (Manual will specify exact intervals).
Fork Oil:
Specific viscosity and quantity for WP suspension (refer to manual for exact type, e.g., WP Suspension Fluid 15W).
Common Concerns:
Early models experienced some issues with fuel pump reliability and occasional electrical gremlins, which were often addressed through service bulletins or updates. The manual will provide troubleshooting for these and other potential issues.