Engine Service Repair:
Complete overhaul, component diagnosis, troubleshooting
Transmission Service Repair:
Manual and Automatic transmission overhaul, diagnosis
Brake System:
Hydraulic system, components, troubleshooting, bleeding procedures
Electrical System:
Wiring diagrams, component testing, circuit diagnosis
Suspension:
Front and rear suspension components, alignment, troubleshooting
Steering:
Steering gearbox, linkages, troubleshooting
Cooling System:
Radiator, water pump, thermostat, hoses, troubleshooting
Fuel System:
Carburetor(s) (likely Hitachi or Mikuni), fuel pump, lines, troubleshooting
Fuel Injection:
Applicable models/years with fuel injection systems
Emission System:
Emission control components, troubleshooting
Heater Air Conditioning:
HVAC system components, operation, maintenance
Chassis Body:
Frame, body panels, doors, windows, trim
Restraint System:
Seat belts, passive restraint systems (if applicable)
Interior:
Seating, dashboard, trim, instrumentation
Differential Drive:
Rear axle and differential overhaul, maintenance
Axle:
Front and rear axle components, maintenance
General Maintenance:
Scheduled maintenance, fluid changes, filter replacements
Troubleshooting:
Diagnostic charts, symptom-based problem solving
Engine Repair:
Complete engine rebuild procedures, component replacement
Transmission Repair:
Step-by-step overhaul and repair for various transmission types
Brake Repair:
Brake pad/shoe replacement, caliper/cylinder overhaul, drum turning
Wiring Diagrams:
Detailed electrical schematics for all systems
Suspension Repair:
Component replacement (shocks, springs, bushings), alignment procedures
Periodic Lubrication:
Lubrication points and schedules
Steering Repair:
Steering box adjustment, tie rod end replacement
Cooling System Repair:
Thermostat replacement, radiator repair, coolant flush
Fuel Injection Repair:
Diagnosis and repair of fuel injection systems (if equipped)
Fuel System Repair:
Carburetor tuning, fuel pump replacement, fuel filter service
Emission System Repair:
Diagnosis and repair of emission control devices
HVAC Repair:
Component replacement, system servicing
Engine Control System Repair:
Diagnosis of ignition and engine management systems
Chassis Body Repair:
Body panel alignment, rust repair guidance
Restraint System Repair:
Seatbelt inspection and replacement
Interior Repair:
Dashboard component replacement, trim repair
Differential Drive Repair:
Rear axle overhaul, gear backlash adjustment
Axle Repair:
Front and rear axle service
Depth:
Complete factory service information, suitable for DIY and professional mechanics
Illustrations Photos:
Hundreds of photos and illustrations included
Disassembly Assembly:
Step-by-step instructions based on complete disassembly of components
Oil Change Interval:
Typically 3,000-5,000 miles or 3-6 months (refer to manual for precise intervals for specific engine/oil types).
Spark Plug Replacement:
Variable, but typically checked at 10,000-20,000 mile intervals. Rotary specific spark plugs are used.
Coolant Flush:
Every 2 years or 30,000 miles.
Engine Oil Type:
API SG or SH, SAE 10W-30 or 10W-40 recommended (check manual for specific viscosity based on temperature).
Transmission Fluid Type Manual:
GL-4 SAE 75W-90 or 80W-90 gear oil.
Transmission Fluid Type Automatic:
Dexron-III or equivalent ATF.
Brake Fluid Type:
DOT 3 or DOT 4.
Rotary Engine Apex Seals:
Wear of apex seals, leading to loss of compression and performance issues. Requires careful maintenance and operation.
Carburetor Issues:
Clogging, vacuum leaks, and tuning difficulties with age.
Rust And Corrosion:
Common for vehicles of this age, particularly in areas with road salt. Manual will cover body repair and rust treatment.
