Vehicle Segment:
Underbone motorcycle, popular in Southeast Asian markets
Purpose:
Provides comprehensive repair and maintenance guidance for owners and technicians
Value Proposition:
Enables DIY maintenance, cost savings, and professional-quality service
Accuracy:
Endeavored to ensure accuracy, aiming for reliable information
Completeness:
Complete service manual with all necessary repair instructions
Dealer Level Info:
Contains specifications and procedures comparable to authorized dealer service departments
Primary Coverage:
Yamaha T135S, T135SE
Model Years Covered:
2005, 2006, 2007, 2008, 2009, 2010
Type:
Workshop Repair Service Manual
Delivery Method:
Electronic Download (Email)
Engine:
Complete overhaul, repair, diagnostics, tune-ups
Fuel System:
Carburetor system (likely), fuel delivery, troubleshooting
Ignition System:
CDI, spark plug, timing, troubleshooting
Lubrication System:
Oil pump, oil passages, oil change procedures, specifications
Exhaust System:
Muffler, exhaust pipe, heat shields, inspection
Electrical System:
Wiring diagrams, lighting, charging system, starter, ignition switch, troubleshooting
Bodywork:
Panel removal/installation, trim, seating, storage
Transmission:
Clutch operation, gear shifting mechanisms, internal inspection and repair (as applicable to automatic or semi-automatic)
Maintenance:
Routine service, inspections, fluid changes, filter replacements
Removal Installation:
Component removal and reinstallation procedures for major assemblies and sub-assemblies
Assembly Disassembly:
Detailed breakdown and reassembly of mechanical components
Diagnostics Troubleshooting:
Problem identification, symptom analysis, diagnostic charts, repair solutions
Overhaul:
Comprehensive procedures for rebuilding major components, especially the engine
Tune Ups:
Adjustment and calibration of engine components for optimal performance
Depth:
Comprehensive workshop-level repair and overhaul
Target Audience:
Technicians familiar with general automobile practices and specialized Yamaha procedures
Proprietary Components:
Includes instructions for proprietary components and manufacturer-specific procedures
Engine Type:
4-stroke, SOHC, 2-valve
Displacement:
Approximately 135cc (Specific designation T135 indicates this)
Cooling System:
Liquid-cooled (Common for this model range)
Bore X Stroke:
Refer to manual for exact specifications (typically around 52mm x 60.2mm for this displacement class)
Compression Ratio:
Refer to manual for exact specifications (likely around 9.7:1 to 10.0:1)
Fuel Delivery:
Carburetor (likely VM22 or similar, specific model dependent)
Fuel Type:
Unleaded gasoline
Transmission Type:
Semi-automatic, 4-speed (Rotary gear shift, no clutch lever)
Transmission Options:
N/A (This model typically comes with a standard semi-automatic transmission)
Clutch Type:
Wet, multi-plate
Gear Ratios:
Refer to manual for detailed gear ratios and final drive specifications
Overall Length:
Refer to manual for precise dimensions
Overall Width:
Refer to manual for precise dimensions
Overall Height:
Refer to manual for precise dimensions
Kerb Weight:
Refer to manual for specific weight figures (typically around 100-110 kg)
Fuel Tank Capacity:
Refer to manual for exact capacity (often around 4.0 liters)
Oil Change Interval:
Refer to manual for recommended intervals (typically every 3,000-5,000 km or 6 months)
Spark Plug Replacement:
Refer to manual for interval (e.g., 10,000-15,000 km)
Air Filter Cleaning:
Refer to manual for interval (e.g., regular checks, cleaning/replacement every 5,000-10,000 km)
Engine Oil Type:
Refer to manual for exact grade (e.g., SAE 10W-40, API SG or higher)
Engine Oil Capacity:
Refer to manual for exact capacity (e.g., 0.95L to 1.0L with oil filter change)
Coolant Type:
Refer to manual for specification (e.g., ethylene glycol-based coolant)
Common Wear Items:
Clutch wear, potential carburetor issues if not maintained, chain and sprockets
Troubleshooting Emphasis:
Manual provides guidance on addressing common performance and starting issues
Manufacturer:
Yamaha Motor Company, known for performance and reliability in motorcycles
Model Lineage:
The T135 platform is a well-established underbone model with a long history of continuous development
Production Period:
2005-2010 (for this specific manual coverage)
Manufacturing Region:
Primarily manufactured in Southeast Asia (e.g., Indonesia, Thailand, Malaysia)