Target Audience:
Mechanical technicians, experienced DIY enthusiasts, and Yamaha owners seeking detailed service information
Value Proposition:
Provides dealership-level service information, enabling cost savings and professional-quality repairs
Accuracy Assurance:
Endeavors to ensure accuracy with reliable information for optimal vehicle performance
Completeness:
Considered a complete service manual containing all necessary repair instructions
User Empowerment:
Empowers owners to perform informed and knowledgeable repairs like a professional
Engine:
Complete engine repair, overhaul, and disassembly
Fuel System:
Carburetor (likely Mikuni BST series), fuel pump, fuel lines, fuel tank
Ignition System:
CDI ignition system, spark plug specifications, timing
Lubrication System:
Oil pump, oil filter, oil specifications, lubrication points
Exhaust System:
Exhaust pipe, muffler, gasket replacement
Electrical System:
Wiring diagrams, battery, charging system, lighting, starter system, sensors
Transmission:
Gearbox disassembly, inspection, assembly, clutch operation
Chassis:
Frame, suspension (front forks, rear shock absorber), steering system
Bodywork:
Fairings, seat, fuel tank, fenders, panels
Brakes:
Front and rear brake system inspection, service, and fluid replacement
Wheels And Tires:
Wheel bearing service, tire specifications, spoke tensioning
Routine Maintenance:
Tune-ups, oil changes, filter replacements, chain adjustment, spark plug checks
Troubleshooting:
Diagnostic procedures for common issues and system malfunctions
Repair Overhaul:
Detailed step-by-step instructions for component repair and complete disassembly/reassembly
Installation:
Procedures for removing and installing various components
Diagnostic Capabilities:
Advanced diagnostics, including system checks and fault finding
Rebuild Scope:
Comprehensive engine and transmission rebuild procedures
Special Tools:
Identification and usage instructions for specialized Yamaha service tools
Safety Emphasis:
Highlights safety precautions denoted by WARNING, CAUTION, and NOTE symbols
Engine Type:
4-stroke, Single Cylinder, SOHC, 4-valve
Displacement:
595 cc (This is a common displacement for the TT600 series, specific 'RE' variant may vary slightly, confirm with manual)
Bore X Stroke:
95.0 mm x 81.4 mm (Typical for TT600 engine, confirm with manual)
Compression Ratio:
Approximately 9.5:1 (Typical, confirm with manual)
Horsepower Output:
Around 45-50 HP (Estimate based on common configurations, specific 'RE' variant may differ)
Torque Output:
Approximately 45-50 Nm (Estimate, confirm with manual)
Carburetor Type:
Mikuni BSR36 (Typical for TT600RE, confirm with manual)
Fuel Capacity:
Approx. 9 Liters (Check manual for exact capacity)
Oil Capacity:
Approx. 1.6 Liters (Dry sump system, confirm with manual)
Recommended Oil Type:
Yamalube 4 (10W-40) or equivalent API SG or higher, JASO MA certified motorcycle oil (Confirm with manual)
Length:
Approx. 2235 mm (Confirm with manual)
Width:
Approx. 830 mm (Confirm with manual)
Height:
Approx. 1250 mm (Confirm with manual)
Dry Weight:
Approx. 145 kg (Confirm with manual)
Wet Weight:
Approx. 155 kg (Estimate, includes fluids, confirm with manual)
Safety Features Overview:
Focus on safe operation and maintenance procedures as outlined in the manual
Braking System:
Hydraulic disc brakes front and rear
Lighting:
Headlight, taillight, brake light, turn signals
Frame Construction:
Steel cradle frame
Instrumentation:
Analog speedometer, tachometer, odometer, trip meter, and indicator lights
N A:
N/A (This is a traditional motorcycle, not equipped with electronic driver assistance systems)
N A:
N/A (No integrated connectivity features)
Oil Change Interval:
Every 3,000 km or 6 months, whichever comes first (Confirm with manual)
Air Filter Cleaning:
Every 6,000 km or as needed in dusty conditions (Confirm with manual)
Spark Plug Replacement:
Every 10,000 km or as needed (Confirm with manual)
Brake Fluid Type:
DOT 4 hydraulic brake fluid (Confirm with manual)
Coolant Type:
N/A (Air-cooled engine)
Common Wear Items:
Clutch wear, chain and sprockets, wheel bearings, fork seals
Carburetor Tuning:
May require periodic adjustment or cleaning due to its dual-sport nature and potential for off-road use
Torque Wrench Usage:
Emphasized for ensuring fasteners are tightened to specification for safety and longevity
Manufacturer:
Yamaha Motor Company, known for performance motorcycles and sporting goods
Tt Series Lineage:
The TT600RE is part of Yamaha's long-standing dual-sport lineage, evolving from earlier off-road focused models.
Re Designation:
The 'RE' often signifies specific factory modifications or upgrades, potentially including enhanced suspension or engine tuning.
Manufacturing Origin:
Typically manufactured in Japan or other Yamaha global facilities (confirm with manual for specific country of origin)