🏷️ Basic Information

Make:

Yamaha

Model:

XJR1300 / XJR1300L

Model Year Covered:

1999

👋 Introduction

Market Segment:

Yamaha's XJR1300 is a classic muscle bike, known for its large displacement air-cooled inline-four engine, upright riding position, and retro styling. It appeals to riders seeking a powerful, characterful motorcycle with a focus on traditional engineering and riding experience, rather than cutting-edge technology.

Competitors:

Competitors in its era would have included bikes like the Honda CB1000/CB1100 series, Suzuki GSX1100G, Kawasaki ZRX1100/1200, and potentially some Ducati models for riders seeking large displacement performance with a distinctive engine character.

Key Attributes:

Powerful air-cooled inline-four engine, robust chassis, classic styling, emphasis on rider engagement, strong aftermarket support.

📋 Manual Details

Manual Type:

Complete Official Factory Service / Repair / Workshop Manual

Page Count:

346

Language:

English

File Format:

PDF

Delivery Format:

PDF Download

Digital Features:

Zoom In/Out, Printable

📖 Manual Coverage

Engine Systems:

Carburetion (Carb, Intake), Cylinder Head, Camshaft, Valve Train, Pistons, Rings, Connecting Rods, Crankshaft, Oil Pump, Oil Pan, Ignition System, Engine Fasteners, Gaskets, Bearings, Crankshaft Seals, Piston Pin Bushings, Valve Guides, Valve Springs, Timing Gear, Crank Pulley, Oil Cooling System, Radiator, Radiator Fan, Oil Radiator, Head Gasket, Piston Rings, Main Bearings, Cam Bearings, Timing Chain, Valve Locks, Freeze Plugs, Engine Mounts, Motor Mounts

Fuel System:

Fuel Pump, Fuel Filter, Fuel Injectors (if applicable to L model, though likely carb), Fuel Pipes, Carburetor Assemblies, Diaphragms, Pumps, Inlet Valves, Throttle Shaft, Choke Shaft, Choke Valves, Air Filters, Fuel Tank Cap

Transmission And Drivetrain:

Transmission, Clutch (Clutch Shoe, Clutch Case, Clutch Plate, Clutch Lines, Clutch Hose, Pressure Plate, Clutch Slave Cylinder, Clutch Master Cylinder), Flywheel, Axles, Axle Shafts, CV Boots, Transfer Case (if applicable), Shift Linkage, Shifter Cable

Brakes:

Brake System, Brake Discs, Brake Pads, Brake Shoes, Rotors, Rotor Replacement, Brake Hoses, Brake System Components, ABS (if applicable)

Suspension And Steering:

Suspension System, Shocks, Struts, Steering System, Wheel Hubs, Bearings, Steering Wheel, Pedals

Electrical And Ignition:

Ignition System, Spark Plugs, Spark Plug Wires, Ignition Coils, Wiring Harness (Engine Harness, Chassis Wire Harness, Main Wire Harness), Sensors (Oil Sensor, Pressure Sensor, Oil Pressure Sensor, Oxygen Sensor), Alternator, Starter Motor, Starter Relay, Ignition Relay, Headlight Relay, Electrical Pin Connectors, Relays, Switches, Volt Meter, HID lighting

Exhaust And Emissions:

Muffler, Downpipe, Catalytic Converter, Headers, Exhaust Gaskets, Manifold, Air Seals

Cooling System:

Radiator, Radiator Fan, Oil Radiator, Cooling System, Coolant Hoses, Fan Shroud, AC Condenser, Heater System

Body And Chassis:

Chassis components, Body panels, Doors, Hinges, Latches, Hood, Bumpers, Fenders, Grilles, Trim, Emblem, Fuel Door, Air Deflector, Mud Guards, Mud Flaps, Wiper Blades, Washer Pump, Window Regulators, Door Handles, Interior Lighting, Dashboard, Glovebox, Center Console, Floor Mats, Cargo Liners, Glass, Windshield, Door Panels

Maintenance Procedures:

Oil Change, Transmission Fluid Change, Fluid Changes, Air Filter Replacement, Spark Plug Replacement, Tire Rotation, Brake Fluid Change, Clutch Fluid Change, Coolant Flush, Battery Replacement, Fuel Filter Replacement, Wiper Blade Replacement, Lighting Bulb Replacement

Repair Procedures:

Engine Rebuild (Internal Components), Carburetor Rebuild/Adjustment, Ignition System Diagnosis and Repair, Transmission Overhaul, Clutch Service and Replacement, Brake System Repair (Pads, Rotors, Lines), Suspension Component Replacement, Steering System Repair, Electrical System Troubleshooting and Repair, Exhaust System Repair, Cooling System Repair, Body Panel Repair and Replacement, Interior Component Replacement

Troubleshooting:

Diagnostic procedures for all major systems, fault code identification (if applicable), symptom-based troubleshooting guides

Technical Specifications:

Torque Specifications for all fasteners, Fluid Capacities, Fluid Types, Electrical Specifications, Wiring Diagrams, Component Specifications

Depth Of Coverage:

Complete Factory Service Manual covering all aspects of maintenance, troubleshooting, repair, and overhaul of the Yamaha XJR1300/XJR1300L for the 1999 model year. This manual provides detailed instructions, diagrams, and specifications for both basic maintenance and complex mechanical and electrical repairs.

📊 Manual Specifications

Digital File Type:

PDF

Printability:

Yes

Manual Quality:

Factory Original Quality

Searchability:

Likely searchable text within the PDF, enabling quick access to specific information.

⚙️ Engine Specifications

Engine Type:

Air-cooled, 4-stroke, DOHC, Inline-four

Displacement:

1250 cc (approx.)

Bore X Stroke:

79.0 mm x 63.8 mm (typical for XJR1300 models)

Compression Ratio:

9.7:1 (typical)

Horsepower:

Approx. 98-100 hp @ 7,500 rpm (depending on specific market and tuning)

Torque:

Approx. 108-110 Nm @ 6,000 rpm (depending on specific market and tuning)

Carburetion:

Mikuni CV (Constant Velocity) carburetors, likely 36mm or 37mm (e.g., Mikuni BS36 or BS37)

Fuel Tank Capacity:

Approx. 21 Liters

Ignition Type:

Transistorized Ignition (TCI)

Oil Type Recommendation:

Yamaha recommends API SG or higher, JASO MA compliant, SAE 10W-40 or 20W-50 motorcycle oil. Specific viscosity may vary based on ambient temperature.

Oil Capacity:

Approx. 3.7 Liters (with filter change)

🔧 Transmission

Transmission Type:

5-speed constant mesh

Clutch Type:

Wet, multiple-disc

Transmission Oil Type:

API GL-4 or GL-5, SAE 80W-90 hypoid gear oil (standard motorcycle transmission oil).

Transmission Oil Capacity:

Approx. 1.6 Liters

📐 Dimensions

Overall Length:

Approx. 2200 mm

Overall Width:

Approx. 775 mm

Overall Height:

Approx. 1115 mm

Wheelbase:

Approx. 1500 mm

Dry Weight:

Approx. 218 kg

Wet Weight:

Approx. 235 kg (with fluids)

Front Tire Size:

120/70ZR17M/C (58W)

Rear Tire Size:

170/60ZR17M/C (72W)

Wheel Type:

Cast aluminum

Wheel Bolt Pattern:

N/A (Cast wheels with hub mounting)

🛡️ Safety Features

Braking System:

Hydraulic dual disc front brakes, hydraulic single disc rear brake.

Frame Construction:

Steel diamond frame

💡 Technology Features

Infotainment Features:

As a 1999 model, this motorcycle is very basic in terms of technology. It features a traditional analog instrument cluster (speedometer, tachometer, fuel gauge, temperature gauge), lighting system (headlights, taillights, turn signals), and basic switches. No integrated infotainment or advanced driver assistance systems.

Driver Assistance Features:

None

Connectivity Features:

None

🔧 Maintenance

Oil Change Interval:

Typically every 4,000-6,000 km or 6-12 months, whichever comes first, depending on riding conditions. Refer to manual for exact mileage.

Spark Plug Replacement:

Generally every 12,000-24,000 km, but check manual for specific type and recommendation. NGK CR9E or similar is common.

Valve Clearance Check:

Typically at 24,000 km or 48,000 km intervals, depending on model updates. Crucial for air-cooled engines.

Brake Fluid Type:

DOT 4 recommended for hydraulic brake systems.

Coolant Type:

Ethylene glycol-based antifreeze coolant, typically a 50/50 mix with distilled water.

Common Wear Items:

Clutch wear, brake pad/rotor wear, chain and sprocket wear, carburetor synchronization issues, potential for oil leaks from engine seals over time due to age, valve seat wear.

Performance Enhancements:

Common modifications include aftermarket exhausts, jet kits for carburetors to optimize for exhaust changes, upgraded suspension components, and custom tuning.

📚 Vehicle History

Manufacturer History:

Yamaha Motor Corporation is a Japanese manufacturer of motorcycles, marine products, and other motorized products. Founded in 1955, Yamaha has a long history of innovation and performance in the motorcycle industry.

Xjr Series Origin:

The XJR series originated in the early 1990s, building upon Yamaha's legacy of large displacement air-cooled inline-four engines, often drawing inspiration from classic models like the XS series. The XJR1300 specifically replaced earlier 1200cc models and was designed to offer a potent combination of retro styling and modern performance for its time.

Production Years:

The XJR1300 was produced for many years, with the 1999 model representing a significant iteration of this popular naked sportbike.

🏆 Awards & Recognition

Industry Recognition:

While specific awards for the 1999 model year are not readily available, the XJR series has consistently been praised for its strong performance, comfortable ergonomics for a naked bike, and its appeal to riders who appreciate classic motorcycle design and a visceral riding experience.